• Korean Journal of Remote Sensing
• /
• v.18 no.6
• /
• pp.337-344
• /
• 2002

In general, in order to obtain position information from satellite images, satellite sensor model which represents the geometric relationship between sensor and targeted area should be established in the first place. However, it is not simple for modelling pushbroom satellite sensor due to the image capturing process. In recent development of new generation imaging sensors, a generic sensor model, which is applicable to all types of sensors such as frame, pushbroom, whiskbroom, and SAR is in great need to the remote sensing and photogrammetry community. In this paper, the RFM as sensor model was implemented with KOMPSAT EOC and SPOT satellite images and analyzed in cases where the number and distribution of ground control points were varied. The test results of RFM were presented and compared with those of Direct Linear Transformation(DLT).

• Korean Journal of Remote Sensing
• /
• v.17 no.3
• /
• pp.211-218
• /
• 2001

We have performed the calculation of total radiances for the KOMPSAT-2 Multispectral Camera (MSC) using a radiative transfer model of MODTRAN and examined its results. To simulate four seasonal conditions in the model calculation, we used model atmospheres of mid-latitude winter and summer for calculations of January 15 and July 15, and US standard for April 15 and October 15, respectively. Orbital parameters of KOMPSAT-2 and the seasonal solar zenith angles were taken into account. We assumed that the meteorological range is the tropospheric aerosol extinction of 50 km and surface albedo is the global average of clear-sky albedo of 0.135. MSC contract values are found to be considerably greater in the MSC spectral range than the total radiances calculated with the above general conditions. It is also shown that the spectral behavior of model results with the constant surface albedo differs from the pattern of MSC contract values. From these results, it can be inferred that the forthcoming MSC images would be somewhat dark.

• Food Science and Industry
• /
• v.45 no.4
• /
• pp.16-20
• /
• 2012

Although the technology of breadmaking simply goes through the process of mixing, fermentation, and baking, it is very hard to make a same product every day. The reason is that baking science begins with the very first process of breadmaking which is mixing, and every steps and working environments are so closely connected. The baking science has developed in short time since the theory of fermentation has released. If you check the development of baking technology synthetically, it is consisted of the discovery of nutritional and functional ingredients, the optimization process of new machines, and the maintenance of the quality as fulfilling social demands. Because the baking business is making and selling the product, baking itself is a business, and it has the form that manufacturing and service business coexist. In today's current domestic bakery market, the supply exceeds the demand. Moreover, the concept of bakery itself has been changing from the fixed image of bakery which is selling the bread to the differentiated bakery with others. As we look at the general bakery's trends, it is focused on going back to the basic or traditions, going to the functional, and working with automations. To conclude, the baking has a long history, but it actually has the short history in the technological development. Baking business can be viewed as the simple business, but many factors are related to the business. It has a few basic kinds of products in baking, but it has diverse kinds of products with the base of infinite creativity. Even though it is physically a hard working business, it is also a business that can face with fun. For managing a bakery, finally, the differentiated strategy with other bakery that maximizes the customers' value is needed.

• Journal of Biomedical Engineering Research
• /
• v.40 no.5
• /
• pp.206-214
• /
• 2019

Surgical methods and associated precision systems have been developed, but surgical procedures that require precise location and fine manipulation of the lesion remain a limitation. The combination of precision robot manipulation technology and 3D medical image navigation technology overcomes the limitations of minimally invasive surgery (MIS) and enables a more stable and successful operation. Surgical robots are surgical robots such as da Vince, and surgical robots using industrial robotic arms. There are various developments and researches of medical robots. In recent medical robot development, a new type of surgical robot based on an industrial robot arm capable of easily replacing the end effector according to the user's needs is being actively developed at home and abroad. Therefore, in this study, we developed safety and performance evaluation guideline for micro - surgical robots based on open robot platform using general purpose robot arm to help quality control of the medical device.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.425-431
• /
• 2019

This clinical case report describes the digital workflow that combines a face scan, cone beam computed tomography and an intraoral scan to visualize the outcome of prosthodontic treatment in the anterior region. This approach improves communication between clinic, laboratory and patients. A patient with healthy general condition came for a restorative treatment to treat post-traumatic central incisors of maxilla. A virtual patient replica was made by incorporating a face scan, cone beam computed tomography and an intraoral scan. Design mockup of definitive restorations was shown to the patient and modified according to the patient's desire. This digital workflow facilitates the fabrication of optimal esthetic restorations, and enhances the predictability of outcome of restorations.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.7-12
• /
• 2018

In the field of machine vision, a variety of lenses are used to inspect a product for defects. Only part of the appearance of an object can be photographed with a general lens. Optical components such as mirrors, multiple lenses and cameras are required to inspect the entire exterior. This increases the size of the optical system, and has the disadvantage of high cost. In this paper, we design a hypercentric lens, which can photograph the top and side of an object, and various sizes of objects while maintaining the image size. Also, the validity of the design is verified through the performance analysis of the product.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.621-642
• /
• 2021

In this paper, the subjective video quality assessment of the content quality was to examine by the assessors about the three content quality of HD, Up-scaling UHD, 4K UHD Native that is currently broadcasted. The comparative assessment was conducted using three types of TV sets, 55, 65, 75 inches, at a distance of 2.5 meters which is the distance of watching TV in general households. Among the participants who took part in the video quality evaluating experiment and the questionnaire survey, the answering data of the final 169 persons were adopted after removing the data of 4 persons who answered inadequately in the evaluation of the video quality. The effects of gender, preference of program genre, size of TV sets were analyzed statistically using SPSS 25.0 analysis package. In addition to these, the objective video quality assessment through the measuring instrument was performed, and compared with the results of subjective video quality assessment.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.45-52
• /
• 2021

In this paper, we proposed an Atrous Residual U-Net (AR-UNet) to improve the segmentation accuracy of semantic segmentation method based on U-Net. The U-Net is mainly used in fields such as medical image analysis, autonomous vehicles, and remote sensing images. The conventional U-Net lacks extracted features due to the small number of convolution layers in the encoder part. The extracted features are essential for classifying object categories, and if they are insufficient, it causes a problem of lowering the segmentation accuracy. Therefore, to improve this problem, we proposed the AR-UNet using residual learning and ASPP in the encoder. Residual learning improves feature extraction ability and is effective in preventing feature loss and vanishing gradient problems caused by continuous convolutions. In addition, ASPP enables additional feature extraction without reducing the resolution of the feature map. Experiments verified the effectiveness of the AR-UNet with Cityscapes dataset. The experimental results showed that the AR-UNet showed improved segmentation results compared to the conventional U-Net. In this way, AR-UNet can contribute to the advancement of many applications where accuracy is important.

• Imaging Science in Dentistry
• /
• v.51 no.3
• /
• pp.243-250
• /
• 2021

Purpose: The objective of this study was to evaluate the amount of height available for a maxillary sinus augmentation procedure without blocking the ostium and jeopardizing the drainage of the ostiomeatal complex using cone-beam computed tomography (CBCT) imaging. Materials and Methods: A total of 200 sinonasal complexes comprising 100 dentate and 100 edentulous scans were retrospectively assessed using CBCT. Invivo 5.0, a CBCT reconstruction program, was used for image evaluation. The coronal section demonstrating the ostiomeatal complex was selected as a reference view to perform measurements of the sinus. The measurements were done by 2 evaluators in separate sessions. Comparative analyses of measurements were performed between dentate and edentulous patients and between male and female patients. Results: The safe height to which the sinus can be elevated without compromising the integrity of the ostiomeatal complex was calculated for each sinus. In the presence of significant mucosal thickening, the height available for augmentation was calculated by subtracting the height of mucosal thickening from the sinus floor to the location of the ostium. In this study, the available height was approximately 27.05 mm for dentate and 23.40 mm for edentulous patients. The inter-operator reliability was excellent for all the parameters evaluated. Conclusion: This retrospective study with a limited number of patients from a single university-based site shows that CBCT is valuable in evaluating the location and patency of the ostium for planning sinus augmentation procedures for dental implant placement.

• Cross-Cultural Studies
• /
• v.31
• /
• pp.95-118
• /
• 2013

Robert Frost's poetry has generally been considered fairly readable partly because of the simplicity or down-to-earth-ness of the messages that go along with the poet's projected public image and the 'traditional' forms he used. Against the grain of such general perception, this study reads some of the early poems of Robert Frost to re-characterize the beginning of the poet's career as a modernist attempt to challenge the dominant poetic conventions of the time: the genteel conventions. In reading the poems, this study focuses on frost's strategic method of using the speaker or persona regarding the delivery of meanings. Those readers who would like to find the immediate presence of Frost's voice in the poems, fail to distinguish the speaker and the poet, readily accepting the face value of what the speaker tries to convey: those messages which are in line with liberal individualism, like self-reliance, autonomous self, work ethics, etc. Frost's speakers, however, are rarely the mouthpiece of the poet himself. Rather, they are fictional characters who, while on the surface of the text appear to be hammering out a stable theme out of their everyday experience, under a heuristic scrutiny of the textual structure, turn out to be undermining the logic or the rationality of the theme, which can be identified as a modernist textual strategy that challenges the traditional conventions regarding the stability of meaning in a poetic text.