• 제목/요약/키워드: gelation property

검색결과 29건 처리시간 0.019초

에탄올처리 찰가자미류껍질 젤라틴의 물리적 특성에 대한 겔화조건의 영향 (Effect of gelation condition on physical properties of dover sole skin gelatin prepared by fractional precipitation with ethanol)

  • 조순영;하진환;이정석;이응호;김진수
    • Applied Biological Chemistry
    • /
    • 제38권2호
    • /
    • pp.147-150
    • /
    • 1995
  • 에탄올처리 찰가자미껍질 젤라틴의 젤라틴농도, pH, 정치온도 및 시간과 같은 겔화조건에 대한 물리적 특성 및 색조의 변화를 측정하였다. 젤라틴의 농도가 증가할수록 겔강도, 녹는점과 같은 물리적 특성은 증가하였고, 일정농도에서의 이러한 값들은 에탄올처리한 젤라틴이 무처리한 젤라틴에 비하여 컸다. 젤라틴 졸의 pH가 에탄올처리한 젤라틴의 경우 6.0일 때, 무처리한 젤라틴의 경우 5.0일 때, 겔강도, 졸화온도 및 겔화온도가 가장 높았고, 이를 벗어난 $pH\;5.0{\sim}7.0$의 범위에서는 서서히 감소하였으며, pH 5.0이하 및 pH 9.0이상에서는 급격히 감소하였다. 젤라틴 졸을 겔화시키기 위하여 정치시키는 온도의 경우 낮을수록, 정치시키는 시간의 경우 길어질수록 겔강도 및 졸화온도는 높았다. 겔화조건을 동일하게 하였을 때 에탄올처리한 젤라틴이 무처리한 젤라틴보다 물리적 특성값이 높게 나타났다.

  • PDF

Effects of Protein Unfolding and Soluble Aggregates Formation on the Gel Strength of Whey Proteins

  • Park, Moon-Jung;Michael E. Mangino
    • Preventive Nutrition and Food Science
    • /
    • 제2권4호
    • /
    • pp.281-284
    • /
    • 1997
  • Heat-induced gelation is an important functional property of whey proteins. Preheating of calcium reduced whey was reported to increase gel strength. 5% whey-protein solutions were preheated at pH7 and at various temperatures(60~8$0^{\circ}C$) for 15 minutes. The amount of soluble aggregates and denaturation enthalpy of preheated whey proteins were measured. Preheating temperature was negatively correlated with denaturation enthalpy($R^2$=0.857, P=0.08) and positive with the amount of soluble aggregates($R^2$=0.921, P=0.002). Denaturation enthalpy was negatively correlated with gel strength($R^2$=0.93, P=0.002). Soluble aggregates and gel strength were positively correlated($R^2$=0.972, P=0.0003). The formation of three dimensional gel network requires controlled protein denaturation and aggregation. Since preheating leads to the partial denaturation of proteins and the formation of soluble aggregates, preheated whey proteins have a higher gel strength than non-preheated one.

  • PDF

졸-겔법에 의한 PZT 합성과 박막제조 (Sol-Gel Processing and Properties of PZT Powders and Thin Films)

  • 오영제;정형진
    • 한국세라믹학회지
    • /
    • 제28권12호
    • /
    • pp.943-952
    • /
    • 1991
  • Lead zirconate titanate(PZT) powders and thin films were prepared from an alkoxide-based solution by sol-gel method. Gelation of synthesized complex solutions, pyrolysis and crystallization behaviors of the dried powder were studied in accordance with a water content and a catalyst. PZT thin films were formed by spin-casting method on silicon and platinum substrates, and characterized. Ester produced from the reactions was completely removed when drying of the gel was finished. Pyrolysis property of the dried PZT gels were changed in order water content, class of catalyst, and quantity of catalyst. Crystalline Pb phase was transiently formed near 250$^{\circ}C$. Basic catalyst is good additive for a formation of perovskite phase in the films, and acidic catalyst for a densified film structure. By the analysis of RBS, Pb element in the PZT films were diffused into silicon substrate, and the pores, may be produced due to local densification around some grains in the films, make an origin of fault in microstructure when holding time goes to be longer at 700$^{\circ}C$.

  • PDF

솔-젤법에 의한 다공성 실리카 세라믹스의 제조-$H_2O/TEOS$ 몰비의 영향- (Porous silica ceramics prepared by sol-gel process-Effect of $H_2O/TEOS$ molar ratio-)

  • 이진휘;김화중;이준
    • 한국세라믹학회지
    • /
    • 제34권2호
    • /
    • pp.216-224
    • /
    • 1997
  • TEOS와 에탄올의 양을 고정하고 H2O/TEOS의 몰비가 2.6-59.0이 되는 범위에서 염산촉매를 사용하여 다공성 실리카 세라믹을 제조하였다. 서로 다른 조성의 솔 9종을 만든 후 젤화시간 측정, TG/DTA에 의한 건조시료의 열분석 및 FT-IR과 X-ray diffractometer에 의한 중간생성물의 특성분석을 수행하였고 50$0^{\circ}C$까지 열처리한 시료의 FT-IR에 의한 SiO2폴리머 분석, N2-adsorption isotherm을 이용한 비표면적과 기공크기분포 조사 및 TEM에 의한 SiO2폴리머의 형태와 기공의 변화를 조사하였다. 적용된 조성 및 촉매의 농도에서 최소 젤화반응시간은 TEOS1몰달 물의 양이 약 11몰에서, 가장 높은 중합도는 약 8-18몰에서, 그리고 가장 큰 비표면적값은 약 11몰에서 보였다. 이것은 물의 양이 약 11몰일 때 중합반응이 가장 빠르게 진행하였음을 의미한다. 결론적으로, 물의 양이 증가함에 따라서 약 11몰까지는 반응이 빠르게 진행되나 그 이상의 물이 사용될 경우 과잉의 물이 반응저해요인으로 작용하여 젤화시간의 지연 및 비표면적의 감소를 보인다.

  • PDF

DSC에 의한 보리 ${\beta}-Glucan$ [mixed-linked$(1-3),(1-4)-{\beta}-D-Glucan$의 열적 특성에 관한 연구 (A Study on the Thermal Characterization of Barley ${\beta}-Glucan$ [mixed-linked $(1-3),(1-4)-{\beta}-D-Glucan$] by Differential Scanning Calorimetry)

  • 차희숙;김미옥;구성자
    • 한국식품과학회지
    • /
    • 제25권1호
    • /
    • pp.22-27
    • /
    • 1993
  • 보리를 thermostable ${\alpha}-amylase$와 amyloglucosidase로 처리하여 ${\beta}-glucan$을 얻은 후 정제과정을 통해 순수한 ${\beta}-glucan$을 얻어 보리 ${\beta}-glucan$의 열적특성을 연구하여 다음과 같은 결과를 얻었다. 보리${\beta}-glucan$의 DSC thermogram은 3개의 흡열곡선을 나타냈으며 1차 흡열곡선은 겔화상전이 현상을 나타냈다. 보리 ${\beta}-glucan$의 농도가 증가함에 따라 겔화 온도범위와 엔탈피가 최대값을 나타냈으며 4 g/dl ${\beta}-glucan$의 To, Tp 및 Tc는 각각 $48.8^{\circ}C,\;61.2^{\circ}C$$78.5^{\circ}C$였고 엔탈피는 0.23 ca1/g이었다. pH 의존성에서 pH 7일 때 겔화온도의 범위가 넓었고 엔탈피도 가장 컸으며 산성과 알칼리성이 강할수록 낮은 값을 나타냈다. 염농도 의존성에서는 염을 가하지 않았을 때 겔화 온도범위와 엔탈피가 높았고 염을 첨가했을 경우 엔탈피는 급격히 감소하였으며 Tp와 Tc는 저온으로 이동되었으나 염농도 증가에는 영향을 받지 않았다. 보리 ${\beta}-glucan$의 열적특성에서 urea는 겔형성을 촉진시키는 active-reagent이었고 glycerol은 inactive-reagent임이 확인되었다. 열분해 현상에서 보리 ${\beta}-glucan$의 "true melting" 온도는 $184^{\circ}C$ 였고 엔탈피는 34.6 cal/g이었으며 분해온도는 $316^{\circ}C{\sim}346^{\circ}C$ 범위로 열에 대해 매우 안정한 물질임을 알 수 있었다.

  • PDF

Characterization and Functional Properties of an Oat Gum Extracted from a Drought Harvested Oat (Avena sativa)

  • Ramos-Chavira, Naivi;Carvajal-Millan, Elizabeth;Rascon-Chu, Agustin;Marquez-Escalante, Jorge;Santana-Rodriguez, Victor;Salmeron-Zamora, Juan
    • Food Science and Biotechnology
    • /
    • 제18권4호
    • /
    • pp.900-903
    • /
    • 2009
  • An oat gum was extracted from whole seeds of a drought harvested oat (Avena sativa). Oat gum presented a ${\beta}-glucan$ content of 65%(w/w) and an intrinsic viscosity of 141 mL/g. Gelling capability of oat gum at different concentrations was investigated. Gel hardness increased from 0.08 to 0.25 N as the oat gum concentration changed from 5 to 10%(w/v). Whippability, foam stability, emulsion stability, and reduced viscosity of oat gum at different pH were also investigated. Oat gum whippability was maximum at pH 7 (146%), while the higher foam and emulsion stability values were found at pH 9 (88 and 96%, respectively). The gum reduced viscosity increased from 715 to 958 mL/g as the pH changed from 7 to 9. Oat gum shows great potential as a gel forming, thickening, and stabilizing agent.

Galactomannan 이용에 관한 연구 : Affinity Chromatography에 의한 지렁이 유래 /alpha-Galactosidase의 정제 및 응용법 (Purification and Application of Earthworm /alpha-Galactosidase by Affinity Chromatography)

  • 박귀근;정규훈;소림수행
    • 한국미생물·생명공학회지
    • /
    • 제27권4호
    • /
    • pp.298-303
    • /
    • 1999
  • An $\alpha$-D-galactosidase ($\alpha$-D-galactoside galactohydrolase, EC 3. 2. 1. 22) from earthworm was purified by affinity chromatography using N-$\varepsilon$-aminocaproyl-$\alpha$-D-galactopyranosylamine coupled to sepharose and its properties were examined. The specific activity of the purified enzyme, tested with p-nitrophenyl-$\alpha$-D-galactopyranoside as substrate, was 314 units/mg protein, representing an 122-fold purification of the original crude extract. The final preparation obtained from by Sephadex G-25 chromatography showed a single band on SDS-polyacrylamide gel electrophoresis. The molecular weight was determined to be 48,000 by SDS-polyacrylamide gel electrophoresis. The purified galactosidase was showed maximum activity at pH 4.5 and 4$0^{\circ}C$, and was stable in the pH and temperature ranges from 4.0 to 5.5 and 30 to 5$0^{\circ}C$, respectively. The enzyme activity was inhibited by Zn2+, Hg2+ and Co2+. When the purified $\alpha$-galactosidase treated to guar gum for 6 hour, gel-promoting property was increased. It was clear that enzymatic elimination of galactose from guar gum by purified $\alpha$-galactosidase would lead to a significant increase in gelation ability.

  • PDF

Effects of Ultrasonic Irradiation on Physical Properties of Silica/PEG Hybrids

  • Jung, Hwa-Young;Gupta, Ravindra K.;Lee, Sang-Ki;Whang, Chin-Myung
    • 한국세라믹학회지
    • /
    • 제39권2호
    • /
    • pp.113-119
    • /
    • 2002
  • The effect of ultrasonic radiation is reported for silica-poly(ethylene glycol) system prepared without the solvent using sol-gel processing by varying various parameters such as ultrasonic irradiation time, PEG content and HCl/TEOS molar ratio. The property of sonogel is compared with classic gel which has been prepared with ethanol as a solvent by traditional sol-gel processing. SEM, BET, DTA-TGA, density and Vickers hardness measurements are carried out for analyzing the samples. The gelation time is found strongly dependent on radiation time, PEG content and pH value, and has been discussed on the basis of existing theories. The $SiO_2-10$ & 20 wt% PEG sonogel exhibited superior optical, physical and gel properties as compared to the classic gel, hence, found suitable for device applications. The ultrasonic radiation increased the density and surface area, and also reduced the pore size which is well supported by the shift in the peak of DTA curve. The DTA thermogram was found similar to that of pure silica gel.

Poly(caprolactone) diol/Poly(ethylene glycol)을 기초로 한 폴리우레탄 마이크로겔의 합성 및 특성 (Preparation and Physical Properties of the Polyurethane Microgels Based on Poly(caprolactone) diol/Poly(ethylene glycol))

  • 임정수;김공수;이무재;이영근
    • 폴리머
    • /
    • 제25권1호
    • /
    • pp.41-48
    • /
    • 2001
  • 폴리카프로락톤디올(PCD) 및 폴리에틸렌글리콜(PEG), 디이소시아네이트 및 1,2,6-헥산트리올을 용액중합 방법으로 반응시켜 폴리우레탄(PU) 마이크로겔을 합성하였다. PCD/PEG의 몰비가 다른 마이크로겔의 임계 겔화농도의 성질과 생성에 영향을 주는 중요한 인자임을 알았다. 디이소시아네이트, PCD/PEG의 몰비 및 PEG의 분자량을 달리하여 제조한 PU 마이크로겔의 물리적 및 열적 성질을 실험하였다. PU 마이크로겔은 300nm 이하의 다분산성 구형의 작은 입자로 분포되어 있으며, 저점도 특성을 나타내었다.

  • PDF

효소적 가수분해법에 의한 Gum류의 Gel유동특성 변화 (Gel-promoting Ability of the Various Gums by the Purified Enzyme)

  • 박귀근
    • 한국식품영양과학회지
    • /
    • 제31권3호
    • /
    • pp.465-468
    • /
    • 2002
  • Affinity chromatography법에 의해 해바라기씨 유래 $\alpha$-galactosidase정제를 수행하여 locust bean gum 증점 대체자원의 개발을 위한 기초연구로서 정제효소처리된 guar gum 과 locust bean gum의 구성당인 galactose와 mannose의 구성비율을 비교 검토하였다. 정제효소처리된 guar gum의 중점효과는 galactose와 mannose비율이 1 : 3.2일 때 가장 증가하였다. 이와같은 비율은 효소적 처리시간을 24시간으로 하였을 때 나타내었다. 해바라기씨 유래 $\alpha$-galactosidase처리에 의한 guar gum으로부터의 galactose의 유리가 증점효과에 영향을 미치는 것으로 사료된다. Xanthan gum과 guar gum의 혼합, xanthan gum과 guar gum 및 정제효소처리된 천연 유래 copra meal과의 혼합물에 대한 증점효과도 비교하였다.