• Preventive Nutrition and Food Science
• /
• 제2권4호
• /
• pp.281-284
• /
• 1997

Heat-induced gelation is an important functional property of whey proteins. Preheating of calcium reduced whey was reported to increase gel strength. 5% whey-protein solutions were preheated at pH7 and at various temperatures(60~8$0^{\circ}C$) for 15 minutes. The amount of soluble aggregates and denaturation enthalpy of preheated whey proteins were measured. Preheating temperature was negatively correlated with denaturation enthalpy($R^2$=0.857, P=0.08) and positive with the amount of soluble aggregates($R^2$=0.921, P=0.002). Denaturation enthalpy was negatively correlated with gel strength($R^2$=0.93, P=0.002). Soluble aggregates and gel strength were positively correlated($R^2$=0.972, P=0.0003). The formation of three dimensional gel network requires controlled protein denaturation and aggregation. Since preheating leads to the partial denaturation of proteins and the formation of soluble aggregates, preheated whey proteins have a higher gel strength than non-preheated one.

• 한국수산과학회지
• /
• 제32권5호
• /
• pp.556-562
• /
• 1999

전분은 종류에 관계없이 첨가량을 증가시킴에 따라 gel 강도는 저하하였으며, RA급 냉동 surimi은 전분의 종류에 큰 영향을 받지 않은 반면, A급은 감자전분 및 수식 옥수수전분이 농도 증가에 따른 gel 강도 감소에 가장 적은 영향을 미치는 것으로 나타났다. WPC, DEW 및 SPI는 첨가량이 증가함에 따라 gel 강도는 감소하였으나, BPP는 gel 강도를 증가시키는 것으로 나타났으며, 이 같은 효과는 RA급에서 현저하였다. BPP의 gel 강도 증가 효과는 낮은 변성온도와 열 변성에 따른 구조 변화가 어육 gel의 matrix 강화에 영향을 미치는 것으로 판단된다. RA급을 이용한 어육 gel 제조시 백색도에 큰 영향을 미치지 않는 $2\%$ 범위 내에서 gel 강도 강화를 위해 사용할 수 있는 것으로 나타났다. Gel 강도 1000$\times$g를 제한 인자로 하였을 때, 냉동 surimi의 소모량이 가장 적은 formulation은 A급에서는 A급 surimi $37.8\%$ DEW $6.6\%$, 전분 $3.4\%$ 였으며, RA급에서는 RA급 surimi $40.9\%$, DEW $9.1\%$, 전분 $0.9\%$이었다.

• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.715-721
• /
• 2004

합성 수산화아파타이트(HAp)와 바인더로서 젤라틴(GEL)을 사용하여 공침법으로 조성비가 서로 다른 HAp/GEL 균질복 합체 4종을 제조하였고, 이 균질복합체를 냉간정수압법으로 성형한 후 공기중에서 여러조건으로 소결하였다. HAp/GEL composite의 소결체는 XRD 및 FT-IR로 결정성 및 구조를 조사하였고, 또한 소결시편은 만능재료시험기(UTM)로 압축강도를 측정하였으며, 파단된 소결시편의 표면은 SEM으로 관찰하였다 HAp/GEL composite는 120$0^{\circ}C$에서 3시간 소결하였을 경우 부분적인 $\alpha$, $\beta$-tricalcium phosphate로 상전이가 일어났다. 소결체의 기공률은 1.2-30.2% 범위였고, 소결시편의 압축강도는 16.2-60.1㎫ 범위의 값을 나타냄으로써 기공율에 비해 높은 강도를 나타내었다.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.497-504
• /
• 2000

In this study, mullite-zirconia comosite was fabricated by adding ZrOCl2.8H2O using of boehmite gel coating to Hadong kaolin (pink A grade) in order to enhance strength of the mullite specimens. The influence of ZrOCl2.8H2O content and fireing temperature on the crystall phase, microstructure, bulk density, strength of the specimens was investigated. Mullite-zirconia composite was produced in the process of coating zirconia to mullite powder synthesized thereafter and mixing simultaneously of starting materials with boehmite-zirconia gel. Maximum strength with in this study was 251 sintered at 1$600^{\circ}C$ for 2h. Bulk density and strength of the composite with zirconia coated mullite was higher than simultaneous on mixture of starting materials.

• 한국수산과학회지
• /
• 제41권6호
• /
• pp.419-426
• /
• 2008

Physicochemical characteristics of gelatin extracted from abdominal skin of yellowfin tuna (Thunnus albacares), were investigated by comparing its proximate composition, pH, amino acid composition, viscoelastic properties, gel strength and SDS-PAGE patterns, with those of bovine and porcine gelatins. The effects of gelatin concentration, maturation time, heat and freeze treatments on the gel strength of yellowfin tuna abdominal skin gelatin were studied. Amounts of $\alpha$-chains, $\beta$- and $\gamma$-components of yellowfin tuna abdominal skin gelatin were higher than those of the two mammailan gelatins. Yellowfin tuna abdominal skin gelatin had the lowest imino acids (proline and hydroxyproline) content, which was consistent with that of other fishes. However, yellowfin tuna abdominal skin gelatin was highest in glycine, alanine, and lysine. The gel strengths of all gelatins were proportional to the concentration of gelatin, but yellowfin tuna abdominal skin gelatin exhibited the greatest gel strength at each concentration. Yellowfin tuna abdominal skin gelatin required a longer maturation time than the two mammalian gelatins to form a firm gel. Higher heating temperature decreased the gel strength of yellow fin tuna abdominal skin gelatin more than in the two mammalian gelatins. Freezing decreased the gel strength of bovine gelatin only slightly, but longer freezing times resulted in greater reductions in gel strength in the yellowfin tuna abdominal skin and porcine gelatins.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1231-1239
• /
• 1994

In this study, gel powder which had relatively high hydration reactivity in CaO and P2O5 rich composition of CaO-P2O5-SiO2-H2O system was prepared by sol-gel process and its hydrated specimen was manufactured. The it was investigated to appropriate calcination temperature in sol-gel process which hydrated specimen of gel powder have proven to strength and the effect of factors influenced strength in hydration process. The major product of before and after hydration reaction was hydroxyapatite, and crystalline phase of C-S-H was already formed during gelation process. After hydration reaction of pressed specimen, crystalline phase of C-S-P-H was formed. It was hydrated product of silicocarnotite (5CaO.P2O5.SiO2). Gel phases of C-S-H and C-S-P-H occured as a result of partial substitution of amorphous silica by P2O5 was formed. The strength of hydrated hardened body is developed by strong bonding and bridging between the gel phases of C-S-H or C-S-P-H and the crystalline products such as hydroxyapatite, Ca(OH)2 C-S-H and C-S-P-H. In addition, the ultrafine gel powder have an great effect on increase of hydration reaction.

• 한국식품과학회지
• /
• 제2권2호
• /
• pp.49-55
• /
• 1970

대두단백육(textured soybean protein food)의 제조 과정에서 분리한 대두단백의 건조공정은 단백 gel의 성질과 보수력, 점성도 같은 단백질 특성에 영향을 미쳤다. 모델시스템의 실험에서 질소용해계수로 표시한 대두단백의 변성도는 분리대두단백 gel의 강도의 중요한 변수로 나타났다. gel strength는 질소용해계수가 43이었을 때 최대가 되었고 질소 용해계수가 그보다 증가할 때나 감소할 때는 gel strength가 감소되었다. 이러한 사실은 분리대두단백의 건조공정 중 적당한 단백의 변성은 단백육제조에 필요하며 그 이상의 높은 질소용해계수를 갖도록 할 필요는 없다.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.605-616
• /
• 2014

When the periodic cellular structure is loaded or swelling beyond the critical value, the structure may undergo a pattern transformation owing to the local elastic instabilities, thus leading to structural collapse and the structure changing to a new configuration. Based on this deformation-triggered pattern, we have proposed the novel composite gel materials. This designed material is a type of architectural material possessing special mechanical properties. In this study, the mechanical behavior of the composite gel periodic structure with various gel inclusions is studied further through numerical simulations. When pattern transformation occurs, it results in a different elastic relationship compared with the material at untransformed state. Based on the obtained nominal stress versus nominal strain behavior, the Poisson's ratio and corresponding deformed structure patterns, we investigate the performance of designed composite materials and the effects of the uniformly distributed gel inclusions on composite materials. A better understanding of the characteristics of these composite gel materials is a key to develop its potential applications on new soft machines.

• 한국식품과학회지
• /
• 제23권4호
• /
• pp.428-432
• /
• 1991

본 연구는 식품산업 특히 육가공산업에 돈혈액의 이용을 위하여 NaCl, pH, phosphate가 혈장단백질과 근원섬유단백질 혼합물의 기능성에 어떠한 영향을 미치는지를 규명하고자 실시하였다. 각 단백질의 용해성은 NaCl 농도($1{\sim}4%$)와 $pH(4{\sim}8)$가 증가함에 따라 증가하였다. 혼합물(plasma+myofibrillar)의 용해성, 유화활성, 유화력은 혈장단백질 보다는 낮았으나 근원섬유단백질 보다는 높았다. 혼합물과 근원섬유단백질은 NaCl 농도가 2%에서 3%로 증가할 때 gel 강도가 현저히 증가하였다. 0.3%, polyphosphate를 첨가시 근원섬유단백질의 gel 강도는 약 4배 증가하였으며, 근원섬유단백질과 혼합물의 수분손실량이 크게 감소하였다. $3{\sim}5%$ 단백질농도에서 각 단백질의 gel 강도는 서서히 증가하였으나 $5{\sim}9%$에서는 단백질농도가 증가함에 따라 gel 강도가 크게 증가하였다.

• Journal of Pharmaceutical Investigation
• /
• 제31권1호
• /
• pp.13-18
• /
• 2001

This study was to investigate the relationship between the gel layer thickness and swelling boundary via strength measurements using texture analysis. The novel texture analysis approach was used to examine the dynamics of swelling behavior in a ternary polymeric matrix tablet. The method permitted the characterization of the changes occurring at the peripheral as well as within interior boundary of the swelling during water ingress. The increase in gel strength for pectin, HPMC, and a ternary mixture with gelatin was found to depend on polymer concentration. Therefore, this method is further applicable to characterize the swelling behavior and provide opportunity to differentiate the gel-layer from that of swelling boundary.