• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.128-137
• /
• 2022

For this study, the sol gel method was used to synthesize the spinel LiNi_0.5Mn_1.5O₄ (LNMO) electrode material. Structural, morphological, electrochemical, and kinetic aspects of the LNMO have been characterized. The synthesized LNMO was indexed with the Fd3m cubic space group. The excellent capacity retention indicates that the spinel framework of LNMO has the ability to withstand high rate charge-discharge throughout long cycle tests. The Li diffusion coefficient (D_Li) changes non-monotonically across three orders of magnitude, from 10^-9 to 10^-12 cm² s^-1 determined from GITT method. The variation of D_Li seemed to be related to three oxidation reactions that happened throughout the charging process. A small dip in D_Li at the beginning stage of Li deintercalation is correlated with the oxidation of Mn³⁺ to Mn⁴⁺. While two pronounced D_Li minima at 4.7 V and 4.75 V are due to the oxidation of Ni²⁺/Ni³⁺ and Ni³⁺/Ni⁴⁺ respectively. The depletion of D_Li at the high voltage region is attributed to the occurrence of two successive phase transformation phenomena.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.262-274
• /
• 1999

Several alternatives for increasing the fluoride concentration in the mouth, such as water fluoridation, ingestion of fluoride supplements, fluoride paste, fluoride mouthrinse, application of fluoride gel are available. There is an impressive body of evidence that the topically deliverd fluorides are clinically effective in inhibiting the progression of dental caries. Recent studies on the cariostatic action of fluoride have indicated the importance of fluoride in the fluid environment of the teeth. The fluoride levels in unstimulated whole saliva can be considered indicative of F in the aqueous phase available for interaction with the tooth surface at a given time. The retention of F in the mouth after topical fluoride treatment is considered to be an important factor in the clinical efficacy of F. The aim of this study was to determine the elevation and clearance of fluoride in whole saliv after the following topical flouride treatments using HMDS-diffusion technique and fluoride ion electrode. The obtained results were as follow: 1. Average salivary fluoride concentration in the unstimulated whole saliva was $0.0152ppm{\pm}0.0091ppm$. Unstimulated salivary flow rate was between 0.34-0.36ml/min and there was no statistically significant difference among the groups(p>0.05). 2. Except for the immediate time after treatment, fluoride levels followed as APF gel>neutral gel>F-rinse>F-paste. There was no statistical difference between the salivary F concentration of F-paste group and that of control group after 2 hours. In case of F-rinse group, after 3 hours the concentration had dropped to baseline value. But there was statistically significant difference among the F concentraion of F gel groups and that of control group(p<0.05). 3. The mean $AUC_{0-120min}$ values were followed as neutral gel>APF gel>F-rinse>F-paste, and the values of the two former groups were significantly higher than those of the two latter groups(p<0.05).

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.2
• /
• pp.117-125
• /
• 2003

Experimental and theoretical works were performed for the separation of large polyelectrolyte, such as DNA, in a column packed with gel particles under the influence of an electric field. Since DNA quickly orient in the field direction through the pores, this paper presents how intraparticle convection affects the residence time distribution of DNAs in the column. The concept is further illustrated with examples from solid -liquid systems, for example, from chromatography Showing how the column efficiency is improved by the use of a n electric field. Dimensionless transient mass balance equations were derived, taking into consideration both diffusion and electrophoretic convection. The separation criteria are theoretically studied using two different Peclet numbers in the fluid and solid phases. These criteria were experimentally verified using two different DNAs via electrophoretic mobility measurements. which showed how the separation position of the DNAs varies in the column in relation to the Peg/Pef values of an individual DNA. The residence time distribution was solved by an operator theory and the characteristic method to yield the column response.

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.269-272
• /
• 2015

$La_2Ce_2O_7$ and $CeO_2$ membranes were fabricated from the corresponding powders derived from sol-gel process with polyvinyl alcohol binder. These powders and membranes were characterized by XRD, BET, and FE-SEM analysis. Hydrogen and CO gas permeation experiments were performed using Sievert's type equipment. Both fluxes on these membranes were found to decrease with increase of the temperature. This phenomenon was followed by the surface and Knudsen diffusion mechanism. The hydrogen permeability of the $La_2Ce_2O_7$ membrane was found to be $7.27{\times}10^{-5}mol/m^2sPa$, with perm-selectivity of 7.24 at 303 K.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.349-358
• /
• 1995

The ceramic composite membrane was synthesized by thermal oxidation after evaporation of Al on the support prepared by slip casting process. Oxidation was performed at $700^{\circ}C$ and 80$0^{\circ}C$ under dry oxygen atmosphere. It was considered as optimum oxidation condition that the membrane showed a knudsen behaviro. A further oxidation resulted in an increase of gas permeability because top layer became densified. Then, a multi-layered composite membrane was synthesized through a sol-gel method, evaporation and thermal oxidation of Al coating processes. While the membrane was thermally stable up to 80$0^{\circ}C$, gas permeability was rapidly decreased even at a slight amount of deposition of Al.

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.183-188
• /
• 1997

Antimicrobial activity of various extracts of Xanthium strumarium L. was tested against 25 strains of bacteria, yeast and fungus. The crude ethylacetate extract exhibited strong growth inhibition to the tested strains with the exception of partial Gram-negative bacteria. The property of antimicrobial compound was very stable under heat treatment at $120^{\circ}C$, but it was unstable in acid (pH 3.0) and alkali (pH 10.0) treatment. The antimicrobial compounds were purified by boiling water extraction, ethylacetate extraction, charcoal column chromatography, silica gel column chro- matography and reverse phase HPLC. The purified compound A and B were detected in a single peak (each above 98% purity) through the HPLC analysis. The compound A and B showed a strong growth inhibition against Gram-negative and positive bacteria in the agar diffusion method. When tested by the FDA method using the esterase, compound A mainly inhibited the growth of bacteria and compound B showed the growth inhibition of both bacteria and yeasts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.217-221
• /
• 1997

We have investigated the ferroelectric properties of multi-layered SrBi$_2$Ta$_2$$O_{9}$Pb(Zr,Ti)O$_3$, SBT/PZT, thin film capacitors. Specimens were prepared onto Pt-coated Si wafer by sol-gel method. Ferroelectric properties of these finns could be obtained only for thin SBT layers below 50nm in thickness. The values of dielectric constant and remnant polarization depend mainly on the thickness of SBT layer, which arises from the paraelectric interface layer between SBT and PZT due to the thermal diffusion of Pb. The value of remnant poarization of PZT/SBT is greater than that of SBT, and the plarization fatigue behaviors of PZT/SBT/Pt capacitors are somewhat improved as compared with those of PZT/Pt.t.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.101-105
• /
• 1990

The use of a sol-gel processed cordierite precursor sinterable about$900^{\circ}C$ allows cosintering of the copper and the ceramic. A strong bonding between the copper film and the cordierite substrate can be achieved through an eutectic bonding technique. These interfaces were investigated using STEM. copper diffusion as well as strong chemical and structural modifications was observed in the interface region. Although these interfaces have good adhesion properties, there was no evidence of the formation of the copper compound at the interface.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.100-105
• /
• 1992

A mathematical model is developed for a CSTR in which free radical solution polymerization of methyl methacrylate(MMA) takes place. It turns out that five ordinary differential equations are to be treated simultaneously in order to predict the reactor performance. Although the reaction proceeds under the conditions of relatively low temperature and pressure, the system shows very complex bifurcation features due to the diffusion limitation (gel effect) and the temperature dependence of the kinetic parameters and physical properties. The effects of various system parameters on the reactor performance as well as on the polymer properties are investigated by using the bifurcation analysis. The application of the singularity theory enables us to divide the parameter space into several different regions, in each of which the system takes a unique steady state structure. Under certain circumstances, complex dynamic features such as HB points and limit cycles are observed and these should be taken into consideration in the reactor design.

• Journal of Sensor Science and Technology
• /
• v.27 no.4
• /
• pp.264-268
• /
• 2018

Vertically-aligned $TiO_2$ nanotube electrodes have attracted considerable attention for applications in solar cells, catalysts, and sensors, because of their ideal structure for electron transport and electrolyte diffusion. Here, we prepare vertically-aligned $TiO_2$ nanotube electrodes using a two-step anodization process. The prepared $TiO_2$ nanotube electrodes exhibit uniform pore structures with an inner diameter of ~80-90 nm and wall thickness of ~20-25 nm. In addition, they exhibit an anatase crystal phase after a high-temperature annealing. The annealed $TiO_2$ nanotube electrodes are applied in dye-sensitized solar cells (DSSCs) as photoanodes. The fabricated DSSC exhibits conversion efficiencies of 3.46 and 2.15% with liquid- and gel-type electrolytes, respectively.