• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2194-2200
• /
• 2002

Transmission error is highly related to gear noise. In order to predict the helical gear noise, transmission error analysis is needed. Up to now, the studies for the transmission error were conducted by the modeling of helical gears only. However, since helical gears are supported by the shaft and bearing, transmission error has the effects of the elements. In this study, the procedure to consider the shaft deformation with bearing stiffness for the transmission error analysis is proposed. To do so, the relationship between gear error and shaft deformation is analytically derived. Shaft deformation with bearing stiffness is analyzed by FEM. It is measured in the experimental test rig by the non-contact displacement sensors. Using the tooth error from tooth modification and the shaft deformation, the effects of shaft on the loaded transmission error are investigated.

• Advances in Computational Design
• /
• 제8권3호
• /
• pp.255-271
• /
• 2023

The gear drive of a combat aircraft engine is responsible for power transmission to the different accessories necessary for the engine's operation. Incorrect power transmission can occur due to the presence of failure modes in the gears like bending fatigue, pitting, adhesive wear, scuffing, abrasive wear and polished wear etc. Fault diagnosis of the gear drive is necessary to get an early indication of failure of the gears. The present research is to develop an algorithm using different vibration signal processing techniques on industrial vibration acquisition systems to establish gear fault diagnosis architecture. The signal processing techniques have been used to extract various feature vectors in the development of the fault diagnosis architecture. An open-source dataset of other gear fault conditions is used to validate the developed architecture. The results is a basis for development of artificial intelligence based expert systems for gear fault diagnosis of a combat aircraft engine.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.90-100
• /
• 1997

Sppur gear trains are used widely in high precision machines because gear trains have an advantage of exact transmission of angular velocity. Especially, gear trains are used in high quali8ty photocopying and photography OA machines. In general, gears have errors in manufacturing and assembling process and the errors are limited by tolerances. As the result, the tolerances cause the performance error. Therfore, it is important to predict transmission error caused by the tolerances for the tolerance design. Earlier tolerance design methods use mainly experimental and geometrical techniques. In this paper, a method for gear train analysis with tolerance is proposed. Because the method uses dynamic contacts, it is possible to consider irregularities and assemble errors of gears. In addition, the method can predit dynamic loads on the teeth of gears.

• 생태와환경
• /
• 제55권4호
• /
• pp.285-293
• /
• 2022

어류 채집도구는 다양하며, 채집도구의 선택과 특성에 따라 채집되는 어류의 군집에 차이가 나타난다. 본 연구는 예당호에서 4개의 채집도구 (족대, 투망, 자망 및 삼각망)를 이용하여 어류 군집을 조사하고 비교하였다. 족대와 투망은 개체수를 채집하는 데 효율적이지 않았으나, 수변부에 서식하는 어류의 종 다양성이 높았다. 자망의 경우, 체장이 길거나 등지느러미 극조가 존재하는 어류가 주로 채집되었다. 삼각망에서는 가장 많은 개체수가 채집되었으며, 높은 종 선택성으로 인해 우점도가 높아지는 것으로 나타났다. NMDS 분석에서 족대, 투망 및 자망 간 채집되는 어류의 뚜렷한 차이가 나타났다. 비지도학습법인 Self-organizing map (SOM) 분석으로 자망에서는 체장이 큰 어류가 채집되는 반면 삼각망에서는 체장이 작은 어류가 채집되는 패턴 특성을 밝혀내었다. 채집도구에 따라 어류의 생태적인 특성과 종 다양성 효율이 다르게 나타났으며, 어류 군집조사 시 서식환경과 목적에 부합되는 채집도구를 선택할 필요성이 있다. 또한, 서식처 유형에 적합한 채집도구의 표준화로 연구자 간의 차이를 줄이는 방법의 제시가 요구된다.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.205-215
• /
• 1996

In this paper, the performance analysis of the vehicle with the Ravigneaux type automatic transmission has been carried out using information of engine and drivetrain. It is necessary to understand the overall system including engine, torque converter, clutch, planetary gears, and road load. The equations of motion are derived from dynamic model. The GUI computer simulation program has been developed to analyze the powertrain performance of the vehicle with the Ravigneaux type automatic transmission.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.105-113
• /
• 2000

For exact spherical involute bevel gear, serveral researchers had developed the mathematical models. The solid models of straight bevel gears are obtained and inspected to avoid interference by computer graphics. Furthermore, A gearbox is assembled by spherical involute bevel gears, which are manufactured by CNC machine. The transmission errors in the tooth mesh are measured by Laser sensor, are compared with the AGMA standard. This gearbox is found to be ranked AGMA Q10(JIS 3)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.799-802
• /
• 1995

Whale helical gears is used to transmit motion between parallel shafts, the shaft bearings are subjected to both radial and thrust loads. The reliability and life analysis are based on the two-parameter Weibull disribution lives of the component gears and bearings. Two methods of estimating the time between gear system overhauls and the number of replacement components needed were presented. The first method assumes replacement of all components during an overhaul of a failed gear system. the second method assumes replacement of failed comonents only. Renewal theory was presented to estimate the number of comonent replacements in a gear system for both methods.

• Tribology and Lubricants
• /
• 제18권6호
• /
• pp.418-424
• /
• 2002

The basic concept of ‘gear profile modification’ is to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring., pitting, and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We also compared our results with other experimental results.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 추계 학술논문발표회 논문집
• /
• pp.263-269
• /
• 2002

Design method for Involute bevel gears is developed. The developed gear design system can design the optimized gear that minimize the number of pinion teeth with face tooth. Method of optimization is MS(matrix search) which is developed from this study. Design variables are pressure angle 20, transmitted power, gear volume, gear ratio, allowable contact stress and allowable bending stress, etc. Design method developed this study can bd applide to the plane, machine tools, automobiles.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.490-498
• /
• 2000

The authors have proposed methods (lead crowning and profile modification) for modifying the geometry of spur gears and investigated the contact pattern as well as the transmission errors to recommend the appropriate amount of modification. Based on the investigation, dynamic load of the modified spur gear drive has been calculated, which is helpful to predict the life of the designed gear drive. Computer programs for simulation of meshing, contact and dynamics of the modified spur gears have been developed. The developed theory is illustrated with numerical examples.