• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.

• 전기전자학회논문지
• /
• 제17권1호
• /
• pp.71-76
• /
• 2013

본 연구에서는 AlGaN/GaN HEMT (High electron mobility transistor)를 제작하고 채널폭의 감소에 따른 특성의 변화를 고찰하였다. AlGaN/GaN 이종접합구조 기반의 기판 위에 채널의 길이는 $1{\mu}m$, 채널 폭은 각각 $0.5{\sim}9{\mu}m$가 되도록 전자선 리소그라피 방법으로 트랜지스터를 제작하였다. 게이트를 형성하지 않은 상태에서 채널의 면저항을 측정한 결과 sub-${\mu}m$ 크기로 채널폭이 작아짐에 따라 채널의 면저항이 급격히 증가하였으며, 트랜지스터의 문턱전압은 $1.6{\mu}m$와 $9{\mu}m$의 채널폭에서 -2.85 V 이었으며 $0.9{\mu}m$의 채널폭에서 50 mV의 변화, $0.5{\mu}m$에서는 350 mV로 더욱 큰 변화를 보였다. 트랜스컨덕턴스는 250 mS/mm 내외의 값으로부터 sub-${\mu}m$ 채널에서 150 mS/mm로 채널폭에 따라 감소하였다. 또한, 게이트의 역방향 누설전류는 채널폭에 따라 감소하였으나 sub-${\mu}m$ 크기에서는 감소가 둔화되었는데 채널폭이 작아짐에 따라 나타는 이와 같은 일련의 현상들은 AlGaN 층의 strain 감소로 인한 압전분극 감소가 원인이 되는 것으로 사료된다.