• 제목/요약/키워드: gasoline contamination

검색결과 38건 처리시간 0.024초

배출가스의 후처리 공정을 포함한 토양증기추출법을 이용한 가솔린 오염 토양 복원 (Remediation for Gasoline Contaminated Soils with SVE (soil vapor extraction) Including a Post-treatment System of Extraction Gases)

  • 이민희;강현민;이병헌;빈정인
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제9권2호
    • /
    • pp.28-40
    • /
    • 2004
  • 토양증기추출(Soil Vapor Extraction)법을 이용하여 대표적 휘발성 오염물질(VOCs)인 가솔린을 토양으로부터 제거하는 박스실험을 실시하였다. 아크릴수지로 제작된 65 cm${\times}$20 cm${\times}$30 cm 규모의 박스를 제작하여, 인공적인 토양 환경을 설정한 후, 직경 1 cm인 스테인레스 재질의 관에 0.2cm 간격으로 하부에서 15cm까지 스크린 된 스테인레스 재질의 주입정(2개)과 추출정(1개)을 설치하여 SVE를 실시하였으며, 추출정으로부터 배출되는 가스를 제거하는 후처리 공정을 연결하여 SVE로부터 배출되는 가스의 가솔린 농도와 후처리 공정 후 배출되는 가솔린 농도를 비교 분석하였다. 가솔린 100g을 토양 내 주입한 경우 0.03 L/min 조건의 박스실험에서는 SVE에 의해 약 560L (13일 경과) 가스 추출 후 주입된 가솔린의 95%가 제거되었으며, 주입 가솔린양이 250 g이고 추출 가스량이 0.2 L/min 조건에서는 약 1440L(5일 경과)가스 추출 후 주입 가솔린의 92% 이상이 제거되어, SVE가 토양 내 휘발성 오염물질을 제거하는데 매우 효과적인 방법임을 입증하였다. 가솔린으로 오염된 토양에서 SVE 공정으로부터 배출되는 가스를 과립상 활성탄 흡착탑과 바이오필터를 이용하여 제거하는 실험을 실시하였다. SVE로부터 배출된 가스의 후처리 공정으로 활성탄의 흡착탑을 이용한 제거 공정과 바이오필터를 이용한 제거 공정의 효율을, 후처리 공정으로 주입되는 가스내 가솔린량에 대한 운전 시간별 제거 효율로 나타내었다. 제거 효율은 후처리 공정에 주입되는 가솔린의 농도와 관계 없이 평균 94%의 높고 안정적인 효율을 나타내었고, 후처리 후 배출되는 가스의 농도 자체도 매우 낮게 나타남으로서, 실제 오염지역에서 토양증기추출법과 결합 된 하나의 VOCs 제거공정으로서 효과적으로 사용될 수 있음을 입증하였다. 활성탄 흡착탑과 바이오필터에 유입되는 가솔린의 부하량에 대한 제거 용량은, 주입되는 가솔린의 농도가 상당히 높음에도 불구하고 주입되는 가솔린의 농도가 높을수록 선형적으로 증가하였다. 이러한 결과들은 후처리 공정들이 SVE에서 배출되는 가스의 VOCs 농도가 다양한 환경에서도 광범위하게 적용할 수 있으며, 특히 고농도의 가스상을 처리하는 데에도 매우 효과적으로 사용될 수 있음을 입증한다.

오염지하수출의 미생물학적 복원기술 (BIOLOGICAL REMEDIATION OF CONTAMINATED AQUIFER)

  • 배우근
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1992년도 폐기물 매립지의 공학적 특성과 개량기술
    • /
    • pp.1-18
    • /
    • 1992
  • The contaminatlon of soil and groundwater by leachate from impmperly managed landfills, or by cheiicals and gasoline leaked flu underground storage tanks has buou a serious urldwide environmental problei. Most of those contaminants are adsorptive and absorptive into soul, while they are hardly soluble in water. Thus, the rate of self purification is very slow, causing persistent problems in water use and environmental protection when the contamination is left untreated. Biological remediatlon technologies utilize the ertraordlnary caperbllity of microorganisms In degrading a tilde spectrum of organic compounds. Among them, an in situ bioremediation technology Involves injection of supplementary materials into the subsurfce in order to bring about a significant Increase in the microbial activity. The Increased microbial activity helps remove the pollutants in situ, that is, without digging out contaminants, soil, or water. This paper focused on the features, possibilities, and limitations of the bioremedition technology.

  • PDF

대도시 자동차 배출가스의 발암위해 관리 방안 (Management of Cancer Risk Caused by Motor Vehicle in a Large City)

  • 김강석
    • Environmental Analysis Health and Toxicology
    • /
    • 제13권1_2호
    • /
    • pp.27-31
    • /
    • 1998
  • Motor vehicle exhaust is the major cause to the air contamination in Seoul. It includes many toxic chemicals to human health such as aidehyde, PAHs, benzene, xylene, toluene, benzo[a]pyrene, nickel, arsenic and cadmium in gasoline exhaust and formaldehyde, PAHs, 1,3-butadiene, benzene and particulate matter in diesel exhaust. Some chemicals out of them are classified as a human carcinogen. Many large diesel vehicles such as buses and trucks are drivened frequently in Seoul so that the air in Seoul is seriously contaminated by diesel exhaust, especially particulate matter. The amounts of particulate matter from large diesel vehicles may be estimated to be more than 50% of small dust in Seoul. The particles of particulate matter are coated with many toxic chemicals and some of these are considered as a human carcinogen. The cancer risk has to be throughly managed because the population density of Seoul is very high. Government should list hazardous air pollutants in Seoul, assess the exposure of people to toxic pollutants, especially carcinogens and manage human health risk.

  • PDF

주물 파이프 Gasket을 통한 유기화학물질의 이동 (Permeation of Organic Chemicals through Gasketed Cast Iron Pipe)

  • Yong-Chan Seo;Nack-Joo Kim
    • 한국환경과학회지
    • /
    • 제8권1호
    • /
    • pp.45-50
    • /
    • 1999
  • 깨끗한 모래로 채워진 4개의 16갤론 크기 드럼통에 주물 파이프가 설치되었고 각 파이프에는 3개의 styrene butadiene rubber gasket(1개의 joint와 2개의 end caps)을 장치하였다. 각 파이프는 상수로 채워 내부의 압력을 약 40psi로 유지하였다. 첫 번째 드럼은 일정량의 휘발유로, 두 번째 드럼은 pyrene과 naphthalene을 포함한 휘발유로, 세 번째 드럼은 toluene으로 채워졌고, 네 번째 드럼은 대조군으로 사용되었다. 외부 오염물질의 이동에 의한 오염을 조사하기 위해 일정 간격으로 파이프 내의 물을 약 2년 간 조사하였다. 오염 물질이 투입된 3개의 드럼에서 약 100일 후부터 유기 오염 물질이 검출되었고 외부에 채워진 유기물이 고갈될 때까지 계속적으로 증가하는 추세를 보였다. 이미 오염된 물을 깨끗한 물로 청소한 후에도 오염된 gasket에 남아있는 유기물질이 유출되어 파이프 내의 물이 쉽게 오염되었으며 약 10일 후에는 청소 이전의 농도로 검출되어 gasket에 의한 오염이 오래 동안 지속되는 것으로 나타났다.

  • PDF

Soil-Gas의 분석을 이용한 휘발성 유기화합물 오염도 신속측정 (Rapid Measurement of VOC Using an Analysis of Soil-Gas)

  • 김희경;조성용;황경엽
    • 한국토양환경학회지
    • /
    • 제3권1호
    • /
    • pp.3-9
    • /
    • 1998
  • 본 연구는 휘발성 유기 화합물로 오염된 가솔린 지역에서 soil-gas의 분석결과로부터 오염도를 유추하는 기법에 대하여 서술 하였다. Soil-gas의 채취방법으로는 펌프를 이용한 1)grab sampling법과 흡착제 trap을 사용한 2)passive sampling법이 있다. Grab sampling법은 특정시간에 특정장소에서의 오염도를 보여주며, 반면에 passive sampling법은 특정위치에서 시간에 따른 오염도의 변화를 보여 준다. Soil-gas의 분석은 1)PID나 FID와 같은 작은 검지기에 의해서 총괄 탄화수소량을 측정할수도 있고 2)기체농도에 따라서 색깔이 변하는 지시약이 채워진 기체검지기 튜브를 사용할수도 있으며 3)여러가지 화합물을 한 번에 분석할수 있는 이동형 GC를 사용할수도 있다. Soil-gas를 이용한 측정법은 매우 값싸며 세밀한 정밀조사를 하기 위한 전단계에서 사용할 수 있는 유용한 방법으로 추천할만하다 하겠다.

  • PDF

Biodegradation of Gasoline Contaminated Soils under Denitrifying Conditions

  • Oh, In-Suk;Lee, Si-Jin;Chang, Soon-Woong
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2003년도 생물공학의 동향(XIII)
    • /
    • pp.392-396
    • /
    • 2003
  • 본 연구에서는 하수처리장 반송라인으로부터 얻은 혼합미생물을 사용하여 실험실에서 회분식 실험을 실행하였으며, 산소가 제한되는 유류 오염지역 내에서의 질산염 전자수용체를 이용한 탈질 박테리아의 질산염 이용 평가와 이에 따른, 현장 적용 타당성을 검토하는데 있다. 미생물은 톨루엔(toluene)을 탄소원으로 하고 질산염을 에너지원으로 이용하는 균주로 우점화한 혼합미생물(mixed culture)을 배양하여 실험에 사용하였다. 본 실험을 통해 유류에 의해 오염된 토양의 혐기성 지역에서의전자수용체로 질산염이 존재한다면, 토착미생물에 의한 분해가 느리지만, 발생될 수 있음을 추정할 수 있었다. 또한 질산염의 유무에 따른 BTEX와 MTBE의 혼합기질의 분해 특성 및 부산물을 살펴볼 수 있었다.

  • PDF

Fluorescence Characteristic Spectra of Domestic Fuel Products through Laser Induced Fluorescence Detection

  • Wu, Ting-Nien;Chang, Shui-Ping;Tsai, Wen-Hsien;Lin, Cian-Yi
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제19권5호
    • /
    • pp.18-25
    • /
    • 2014
  • Traditional investigation procedures of soil and groundwater contamination are followed by soil gas sampling, soil sampling, groundwater sampling, establishment of monitoring wells, and groundwater monitoring. It often takes several weeks to obtain the analysis reports, and sometimes, it needs supplemental sampling and analysis to delineate the polluted area. Laser induced fluorescence (LIF) system is designed for the detection of free-phase petroleum pollutants, and it is suitable for on-site real-time site investigation when coupling with a direct push testing tool. Petroleum products always contain polycyclic aromatic hydrocarbon (PAH) compounds possessing fluorescence characteristics that make them detectable through LIF detection. In this study, LIF spectroscopy of 5 major fuel products was conducted to establish the databank of LIF fluorescence characteristic spectra, including gasoline, diesel, jet fuel, marine fuel and low-sulfur fuel. Multivariate statistical tools were also applied to distinguish LIF fluorescence characteristic spectra among the mixtures of selected fuel products. This study successfully demonstrated the feasibility of identifying fuel species based on LIF characteristic fluorescence spectra, also LIF seemed to be uncovered its powerful ability of tracing underground petroleum leakages.

주요산업활동 유형에 따른 서울시 도로변 하수퇴적물의 중금속오염 특성 (The effect of land use characteristics on heavy metal contaminations of sediments from some gullypot catchments in Seoul)

  • 이평구;최상훈;김성환;윤성택
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
    • /
    • pp.28-32
    • /
    • 2000
  • There are many different chemical pollutants that originate from atmospheric deposition and transportational activities along roads. This paper review the characteristics of heavy metal pollution, relationships between land use and pollutant load in urban area. Four land use areas in Seoul were selected for sampling and study with different characteristics during the period from April 1998 and February 2000. A series of studies have been carried out concerning the physicochemical characteristics of the sediments settling down in a gully pot to evaluate the contamination for heavy metals. The sediment samples from gully pots were characterized by the chemical extraction experiments. Sediments are characterized by very high concentrations of heavy metals, probably because of a long-term accumulation of vehicle- and industrial-related pollutants. The characteristics of heavy metal pollution show that each land use has different sources of contaminations. Mean Zn concentration in Yeouido and Junggu areas is 2-3 times higher than those in Dobonggu area. This suggests that Zn may be derived from the source of automobile traffic. The mean concentrations of Cu and Cr are very significantly high in Junggu and Gurogu areas and indicate that the industrial activities may contribute to the accumulation of Cu and Cr in sediments. The low Pb levels throughout the whole study areas in Seoul can be accounted for the use of unleaded gasoline since 1987.

  • PDF

Laboratory-scale Microcosm Studies in Assessing Enhanced Bioremediation Potential of BTEX and MTBE under Various Electron Acceptors in Contaminated Soil

  • 오인석;이시진;장순웅
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 추계학술발표회
    • /
    • pp.368-371
    • /
    • 2003
  • Accidental release of petroleum products from underground storage tank(USTs) is one of the most common causes of groundwater contamination. BTEX is the major components of fuel oils, which are hazardous substances regulated by many nations. In addition to BTEX, other gasoline consituents such as MTBE(methyl-t-buthyl ether), anphthalene are also toxic to humans. Natual attenuation processes include physic, chemical, and biological trasformation. Aerobic and anaerobic biodegradation are believed to be the major processes that account for both containment of the petroleum-hydrocarbon plum and reduction of the contaminant concentrations. Aerobic bioremediation has been highly effective in the remediation of many fuel releases. However, Bioremediation of aromatic hydrocarbons in groundwater and sediments is ofen limited by the inability to provide sufficient oxygen to the contaminated zones due to the low water solubility of oxygen. Anaerobic processes refer to a variety of biodegradation mechanisms that use nitrate, ferric iron, sulfate, and carbon dioxide as terminal electron accepters. The objectives of this study was to conduct laboratory-scale microcosm studies in assessing enhanced bioremediation potential of BTEX and MTBE under various electron accepters(aerobic, nitrate, ferric iron, sulfate) in contaminated Soil. these results suggest that, presents evidence and a variety pattern of the biological removal of aromatic compounds under enhanced nitrate-, Fe(III)-, sulfate-reducing conditions.

  • PDF

마이크로웨이브와 고온발열체를 이용한 연속식 공정의 유류오염토양 처리에 관한 연구 (A Study on Treatment of a Contaminated Soil by Oil using Continuous System of High Temperature Heating Element and Microwave)

  • 하상안;유미영
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제17권1호
    • /
    • pp.8-12
    • /
    • 2012
  • This study is maintains the condition of high temperature (above $600^{\circ}C$) within a short time using on microwave and high temperature heating elements. And removal characteristics according to changes in soil moisture, microwave power and temperature through the decomposition of the contaminated soil by oil. The difficulty resolvability material was sort of lubricating oil having long carbocyclic (C18-C50) and TPH removal rate reached 85.2% at 6 kW and $700^{\circ}C$ and thus the contaminant was removed 1,788 mg/kg within a process time of 40 minutes. In the case of light oil, gasoline contaminated soil, the removal amount showed 567 mg/kg and the treatment rate reached 98.4% at 6 kW, $500^{\circ}C$ and 20 minute. In the case of non-resolvability reached TPH concentrations on 2,000 mg/kg of worrisome level of soil contamination in the 3 zones at 6 kW, $700^{\circ}C$ and 30 minute. At the time, showed up processing costs 8,173 won per ton.