• Title/Summary/Keyword: gas production rate

Search Result 670, Processing Time 0.028 seconds

Probabilistic Prediction of Estimated Ultimate Recovery in Shale Reservoir using Kernel Density Function (셰일 저류층에서의 핵밀도 함수를 이용한 확률론적 궁극가채량 예측)

  • Shin, Hyo-Jin;Hwang, Ji-Yu;Lim, Jong-Se
    • Journal of the Korean Institute of Gas
    • /
    • v.21 no.3
    • /
    • pp.61-69
    • /
    • 2017
  • The commercial development of unconventional gas is pursued in North America because it is more feasible owing to the technology required to improve productivity. Shale reservoir have low permeability and gas production can be carried out through cracks generated by hydraulic fracturing. The decline rate during the initial production period is high, but very low latter on, there are significant variations from the initial production behavior. Therefore, in the prediction of the production rate using deterministic decline curve analysis(DCA), it is not possible to consider the uncertainty in the production behavior. In this study, production rate of the Eagle Ford shale is predicted by Arps Hyperbolic and Modified SEPD. To minimize the uncertainty in predicting the Estimated Ultimate Recovery(EUR), Monte Carlo simulation is used to multi-wells analysis. Also, kernel density function is applied to determine probability distribution of decline curve factors without any assumption.

Relative Palatability to Sheep of Some Browse Species, their In sacco Degradability and In vitro Gas Production Characteristics

  • Abdulrazak, S.A.;Nyangaga, J.;Fujihara, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.14 no.11
    • /
    • pp.1580-1584
    • /
    • 2001
  • A study was conducted to estimate the nutritive value of some selected acacia forages using palatability index, in sacco degradability and in vitro gas production characteristics. Ten wethers (mean wt. $18{\pm}3.5kg$) were offered Acacia tortilis, Acacia nilotica, Acacia mellifera, Acacia brevispica, Acacia Senegal and Leucaena leucocephala (control) using a cafeteria system to determine the species preference by the animals. The acacia species were rich in nitrogen and showed variable palatability pattern. Significant (p<0.05) differences in relative palatability index (RPI) were detected among the species with the following ranking: brevispica > leucaena > mellifera > tortilis > Senegal > nilotica. Acacia nilotica appeared to be of low relative palatability with RPI of 24% and this was attributed to relatively high phenolic concentrations. The DM potential degradability (B) and rate of degradation (c) of the species were significantly (p<0.05) different, ranging from 40.1 to 59.1% and 0.0285 to 0.0794/h respectively. Acacia species had moderate levels of rumen undegradable protein, much higher than that in leucaena. In vitro gas production results indicated the effect of polyphenolic compounds on the fermentation rate, with lower gas production recorded from A. nilotica and tortilis. Based on RPI, A. brevispica and mellifera were superior to the rest and comparable to L. leucocephala. Long-term feeding trials are required with the superior species when used as protein supplements to poor quality diets.

Nodal Analysis of Optimum Operating Condition on Gathering System Considering Coalbed Methane Production Characteristics (석탄층 메탄가스 생산 특성을 고려한 포집시스템 최적 운영조건 노달분석)

  • Jung, Woodong;Cho, Wonjun;Lee, Jeseol;Yu, Hyejin;Seomoon, Hyeok
    • Journal of the Korean Institute of Gas
    • /
    • v.22 no.3
    • /
    • pp.65-73
    • /
    • 2018
  • Coalbed methane has a nonlinear desorption curve depending on the pressure, so an appropriate production system should be constructed considering this phenomenon. The capacity and specification of the coalbed methane gas production facility are determined by the gas flow rate and pressure in the coalbed, which is the external boundary condition of the system. Thus, it is essential to analyze these characteristics in gas production. The gas inflow equation was calculated using the reservoir flow model and utilized as the boundary condition of the whole production facility in this study. Also, to understand the effect of pressure drop on the gas flow in the production facility, the nodal analysis was performed using the flow analysis simulator of production equipment, and we determined the proper specifications and operating conditions of the production facility. This study presents a design criteria as to production and gathering system capable of effectively transporting coalbed methane.

Chemical Composition, Phenolic Concentration and In Vitro Gas Production Characteristics of Selected Acacia Fruits and Leaves

  • Abdulrazak, S.A.;Orden, E.A.;Ichinohe, T.;Fujihara, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.13 no.7
    • /
    • pp.935-940
    • /
    • 2000
  • The objective of this study was to evaluate the nutritive value of selected fruits (pods and seeds) and leaves of acacia tree species namely; Acacia nubica (nubica), Acacia tortilis (tortilis) and Acacia brevispica (brevispica), Acacia reficiens (reficiens) and Acacia senegal (senegal). A wide variability in chemical composition, polyphenolics and gas production was recorded. The crude protein (CP) ranged from 131 to 238 g/kg DM. Neutral detergent fiber (NDF), acid detergent fiber (ADF) and lignin (ADL) were higher in senegal and significantly different (p<0.05) from other species. The nitrogen bound to fiber tended to be higher in leaves than the fruits, ranging from 2.6 to 11.3 g/kg NDF and 1.6 to 3.2 g/kg ADF. The leaves of reficiens and senegal had higher concentrations of total extractable phenolics (TEPH), total extractable tannins (TET) and total condensed tannins (TCT), but lower in NDF, ADF and ADL than the fruits of nubica, tortilis and brevispica. Mineral concentrations varied among species; all were relatively poor in phosphorus, moderate in calcium and magnesium, and rich in microelements. A significant (p<0.05) variation in gas production after 12, 24, 48, 72 and 96 h was recorded between species. Nubica had the highest (p<0.05) rate of gas production (0.0925) while the highest potential gas production was recorded in tortilis. A strong negative correlation between TEPH and TET with gas production after 24, 48, 72 and 96 was established (r=-0.72 to -0.82). Crude protein and TCT correlated negatively but also weakly with gas production characteristics. Organic matter digestibility calculated from gas production after 48 h (OMD48) ranged between 465 g/kg DM in reficiens and 611 g/kg DM in tortilis. The results of this study indicate that acacia species have the potential to be used as feed supplements.

A Study of Biological Hydrogen Gas Production under Anaerobic Fermentation (혐기성 발효에 의한 생물학적 수소생산에 관한 연구)

  • Yoon, Woo-Hyun;Kim, Hyun-Kab;Lee, Tae-Jin
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.14 no.1
    • /
    • pp.131-138
    • /
    • 2006
  • In this study, the optimum condition of pH was investigated on the hydrogen gas production under anaerobic fermentation process. The results of the experiment showed that the optimum condition was observed at pH 6, resulting in 1175.87 mL/L of hydrogen gas production rate and 22.51% theoretical hydrogen conversion ratio. Hydrogen gas production rate and theoretical hydrogen conversion ratio were 901.77 mL/L and 17.48 % respectively at pH 5. At pH 7 and 8, the production rate of hydrogen gas was little low as 82.15 mL/L. Among the organic acids from the sucrose fermentation, propionate was observed as the dominant acid at pH 7 and 8 but butyrate was the dominant at pH 5 and 6.

  • PDF

Development of Automatic Measurement and Control Method based on Single Chip Microcomputer for Tackjoo Fermentation (Single Chip Microcomputer를 이용한 탁주발효(濁酒醱酵)의 자동계측(自動計測)과 제어방법(制御方法)의 개발(開發))

  • Kim, Kyung-Man;Chun, Jae-Kun
    • Korean Journal of Food Science and Technology
    • /
    • v.25 no.4
    • /
    • pp.391-394
    • /
    • 1993
  • For the automation of Tackjoo fermentation, a sensor measurable gas production during brewing and a controller were built. The performance tests were carried out at 10 litter Tackjoo fermentor, The sensor was consisted of a transparent acryl cell for bubble formation and photo-interrupter for the detection of bubbles of 0.018ml size. The fermentation controller was fabricated with a single chip microcomputer (MC68705R3) and provided with both the monitoring module of temperature measurement and the valve controling device for the cooling water circulation in coil type heat exchanger. The operation programs were developed and systemized in ROM. With this computer system, the gas production amount and rate were acquired during the Tackjoo fermentation. The fermentation curve based on the gas production rate showed a good agreement with that of alcohol concentration. The maximum rate of gas production was found after 24 hr at $30^{\circ}C$. The correlation equation between the gas production and alcohol concentration was established and used as the control algorithm of the fermentation.

  • PDF

An Optimal Design of Gas Lift in Offshore Oil Reservoirs Considering Oil and Injected Gas Composition (해저 오일 저류층 내 오일 및 주입가스 조성에 따른 가스리프트 공법의 최적 설계)

  • Kim, Young-Min;Shin, Chang-Hoon;Lee, Jeong-Hwan
    • Journal of the Korean Institute of Gas
    • /
    • v.22 no.4
    • /
    • pp.39-48
    • /
    • 2018
  • This study presents optimal design of gas lift considering composition of reservoir oil and injected gas which can affect gas lift performance in offshore oil reservoir. Reservoir simulation was conducted by using reservoir models which were built in accordance with API gravity of oil. The results of simulation reveal that oil production rate is considerably increased by gas lift when the reservoir productivity decrease. As a results of response curve analysis for gas lift using well models, gas injection rate to improve the production rate increases as the API gravity of oil decreases and the specific gravity of injected gas increases. The optimal design of gas lift was carried out using multiple lift valves. Consequently, gas lift can be operated at relatively low injection pressure because of decrease in injection depth in comparison to the single lift valve design. The improved oil production rates were analyzed by coupling between reservoir model and well model. As a results of the coupling, it is expected that natural gas injection in the heavy oil reservoir is the most efficient method for improving oil production by gas lift.

Biohydrogen Production from Carbon Monoxide and Water by Rhodopseudomonas palustris P4

  • Oh You-Kwan;Kim Yu-Jin;Park Ji-Young;Lee Tae Ho;Kim Mi-Sun;Park Sunghoon
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • v.10 no.3
    • /
    • pp.270-274
    • /
    • 2005
  • A reactor-scale hydrogen (H2) production via the water-gas shift reaction of carbon monoxide (CO) and water was studied using the purple nonsulfur bacterium, Rhodopseudomonas palustris P4. The experiment was conducted in a two-step process: an aerobic/chemoheterotrophic cell growth step and a subsequent anaerobic $H_2$ production step. Important parameters investigated included the agitation speed. inlet CO concentration and gas retention time. P4 showed a stable $H_2$ production capability with a maximum activity of 41 mmol $H_2$ g $cell^{-1}h^{-1}$ during the continuous reactor operation of 400 h. The maximal volumetric H2 production rate was estimated to be 41 mmol $H_2 L^{-1}h^{-1}$, which was about nine-fold and fifteen-fold higher than the rates reported for the photosynthetic bacteria Rhodospirillum rubrum and Rubrivivax gelatinosus, respectively. This is mainly attributed to the ability of P4 to grow to a high cell density with a high specific $H_2$ production activity. This study indicates that P4 has an outstanding potential for a continuous H2 production via the water-gas shift reaction once a proper bioreactor system that provides a high rate of gas-liquid mass transfer is developed.

Effects of Municipal LFG Characteristics on Settlement (도시폐기물 매립지의 LFG 특성이 침하에 미치는 영향)

  • Ahn, Tae-Bong;Jin, Han-Kyu;Park, Dae-Hyo
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2004.03b
    • /
    • pp.461-468
    • /
    • 2004
  • The amount of $CO_2$ and $CH_4$ that were produced during biodegradation with were measured as function of time. Also, the settlements of landfill lysimeters were measured at the same time, and the relation with LFF(landfill gas) production was investigated. The effects of leachate recycle on the acceleration of settlement were studied by comparing two lysimeters. The gas production rate constant, $^{\kappa}_{LFG}$ is obtained to predict future gas production and settlement. These will be key role factors to predict gas production patterns and residual long-term settlement.

  • PDF

Hydrogen Gas Production from Biogas Reforming using Plasmatron (플라즈마트론을 이용한 바이오가스 개질로부터 수소생산)

  • Kim, Seong Cheon;Chun, Young Nam
    • Korean Chemical Engineering Research
    • /
    • v.44 no.5
    • /
    • pp.528-534
    • /
    • 2006
  • The purpose of this paper is to investigate the optimal operating condition for the hydrogen production by biogas reforming using the plasmatron induced thermal plasma. The component ratio of biogas($CH_4/CO_2$) produced by anaerobic digestion reactor were 1.03, 1.28, 2.12, respectively. And the reforming experiment was performed. To improve hydrogen production and methane conversion rates, parametric screening studies were conducted, in which there are the variations of biogas flow ratio(biogas/TFR: total flow rate), vapor flow ratio($H_2O/TFR$: total flow rate) and input power. When the variations of biogas flow ratio, vapor flow ratio and input power were 0.32~0.37, 0.36~0.42, and 8 kW, respectively, the methance conversion reached its optimal operating condition, or 81.3~89.6%. Under the condition mentioned above, the wet basis concentrations of the synthetic gas were H2 27.11~40.23%, CO 14.31~18.61%. The hydrogen yield and the conversion rate of energy were 40.6~61%, 30.5~54.4%, respectively, the ratio of hydrogen to carbon monoxide($H_2/CO$) was 1.89~2.16.