• 동력기계공학회지
• /
• 제7권1호
• /
• pp.14-19
• /
• 2003

A diesel engine has been widely used for ship and industry power because it has many merits of high thermal efficiency, reliability and durability. However its exhaust gas is harmful to human and air environment. Reducing the hurtful exhaust gas emissions, the study of the gas flow in the inlet and exhaust manifold is in progress in the world. In this paper we modeled the gas flow as one dimensional isentropic flow to predict the gas flow in the exhaust manifold. The method of characteristics was used for the model calculation, and the calculated results were compared with the experimental ones.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.56-62
• /
• 2008

A synthetic gas reformed from hydrocarbon-based fuels consists of $H_2$, CO and $N_2$. Hydrogen contained in the synthetic gas is a very useful species in chemical processes, due to its wide flammability range and fast burning speed. The ESGI (Exhaust Synthetic Gas Injection) technology is developed to shorten the light-off time of three way catalysts through combustion of the synthetic gas in the exhaust manifold during the cold start period of SI engines. Before the ESGI technology is applied to the test engine, the authors set a test rig that consists of gas temperature and composition controllers, an exhaust pulse generator and an exhaust manifold with a visualization window, in order to optimize the point and conditions of injection of the synthetic gas. Through measuring burned gas temperatures and taking photographs of synthetic gas combustion at the outlet of the exhaust manifold, the authors tried to find the optimal injection point and conditions. Analysis of burned gas composition has been performed for various $O_2$ concentrations. As a result, when the synthetic gas is injected at the port outlet of the cylinder No. 4 and $O_2$ concentration exceeds 4%, combustion of the synthetic gas is strong and effective in the exhaust manifold.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.22-30
• /
• 2015

개방형 사이클의 액체로켓엔진에서는 추진제 중 일부를 연소시켜 터빈 구동용 가스를 생성시키는 가스발생기가 사용되며, 개방형 사이클 액체로켓엔진의 주요 구성품으로서 가스발생기 자체의 연소성능 및 특성을 파악하기 위한 연소시험이 요구된다. 하지만, 가스발생기에서 생성된 연소가스는 터빈 매니폴드의 터빈 노즐에서 질식이 이루어지기 때문에 가스발생기뿐만 아니라 터빈 매니폴드 내부 부피를 고려해야만 가스발생기의 연소 성능 및 특성, 그리고 음향 특성을 정확히 파악할 수 있다. 따라서, 본 논문에서는 터빈 매니폴드 모사장치를 이용한 가스발생기 연소시험 결과를 기술하고 가스발생기 단독 연소시험 결과를 이용한 특성 예측을 설명한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.309-310
• /
• 2014

Commercial gas burning appliances are classified by KGS AB338. Even though there are many types of gas appliances with different purposes and uses, common standards are applied to the appliances. Manifold of commercial gas range could often be corroded by salt water. Gas leaks and accidents could be occurred by the corrosion. According to suggestion of detailed material standards for manifold of commercial gas range, it could help to use safely and prevent gas accidents.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.837-844
• /
• 2003

The exhaust gas flow in the inlet collector of close coupled catalyst(CCC) adapted to the exhaust manifold is very complex flow because the exhaust gas is a pulsation flow with several port flow. The distribution of gas flow and temperature in inlet collector effect to the efficiency of catalytic converter. In this study, it measures temperatures on several point in inlet collector with two kind of inlet collector volume. And it analyzes with CFD to exhaust manifold and close coupled catalyst for temperature and flow. Comparing to measured and analyzed result, it find increasing of collector volume effects to catalyst temperature distribution and uniformity of catalytic converter

• 공학기술논문지
• /
• 제11권4호
• /
• pp.253-257
• /
• 2018

Exhaust gas from the combustion of automobiles adversely affects the human body and even pollutes the atmosphere. This study investigated the influence of exhaust gas change on intake manifold using the nozzle. First, the flow analysis was performed using the 3D flow analysis program. When the nozzle inlet air velocity increased, the average air velocity in the nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$ increased 37.3% and 31.9% respectively at the intake manifold outlet. As the nozzle inlet air velocity increased, the maximum flow rate of air increased to 42.2% and 32.6%, respectively at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$. In order to verify the analysis results, experiments on the exhaust gas were performed in the engine simulation system. As the nozzle inlet velocity increased, HC values decreased by 42.4% and 31.4% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$, respectively. And CO values decreased by 40.7% and 31.1% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.207-216
• /
• 2015

Amanifold is one of the essential subsea oil and gas production components to simplify the subsea production layout. It collects the production fluid from a couple of wellheads, transfers it to onshore or offshore storage platforms, and even accommodates water and gas injection flowlines. This paper presents the basic design procedure for a manifold frame structure with novel structural verification using in-house unity check codes. Loads and load cases for the design of an SIL 3 class-manifold are established from a survey of relevant industrial codes. The basic design of the manifold frame is developed based on simple load considerations such as the self weights of the manifold frame and pipeline system. In-house software with Eurocode 3 embedded, called INHA-SOLVER, makes it possible to carry out code checks on the yield and buckling unities. This paper finally proves that the new design of the manifold frame structure is effective to resist a permanent and environment load, and the in-house code is also adaptively combined with the commercial finite element code Nastran.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.405-411
• /
• 1999

Dynamic effect of gas in exhaust manifold influences the volumetric efficiency of the engine. Especially in case of multi-cylinder engine the shape of exhaust manifold is important for the opti-mum design of exhasut manifold complicated. In this paper the effects of exhaust manifold systems on volumetric efficiency were investigated for the 4 cylinder 4 stroke-cycle diesel engine. Volumetric efficiency was calculated by the method of characteristics. The calculation results coincided well the test results. This study showed that the appropriate position and diameter of exhaust manifold branch are important factors in increasing volumetric efficiency and decreasing pumping loss.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.129-132
• /
• 2008

30톤급 액체로켓엔진 가스발생기의 연소 특성에 대한 연구를 수행하였다. 개발 초기 가스발생기는 터빈 매니폴드 출구를 모사하는 노즐을 후단에 장착한 상태에서 연소시험을 진행하였다. 이후 가스발생기와 터빈부의 공진모드를 모사하는 연장배관을 가스발생기와 노즐 사이에 추가하여 시험이 이루어졌으며, 최종적으로 터보펌프의 터빈부를 연결한 상태에서 연소시험을 수행하였다. 본 논문에서는 이와 관련된 온도 분포, 압력섭동 결과들을 분석하였다.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.196-205
• /
• 2016

자동차로부터 배출되는 배기가스는 오존 및 미세먼지 등의 농도를 증가시켜 인체의 건강을 위협할 뿐만 아니라 지구 온난화 물질인 이산화탄소를 다량 배출하고 있어 지구 온난화에도 지대한 영향을 미치고 있다. 그래서 정부는 자동차에서 배출되는 배기가스를 효율적으로 규제하기 위한 제도로 운행차 배출가스 정밀검사 제도를 시행하고 있다. 자동차 배출가스를 줄이려는 연구는 다방면으로 이루어지고 있으며, 자동차의 배출가스 중 HC, NOx, $CO_2$ 등의 발생을 줄이기 위한 연구가 이루어지고 있다. 그러나 노후된 자동차에 대한 배출가스 저감에 대한 연구는 부족한 실정이다. 노후된 디젤자동차들이 운행차 배출가스 정밀검사를 만족하기 위해서는 흡기 다기관(manifold)과 인젝터의 카본퇴적물(Carbon sediment)을 세척하여 출력향상 및 배출가스 저감에 대한 연구가 필요하다. 따라서 본 연구에서는 차령 5년 이상, 주행거리 80,000 km 이상의 디젤자동차에 흡기 다기관 클리닝과 인젝터 클리닝을 동시에 수행하여 매연 발생에 미치는 영향을 비교 분석하였다. 실험결과, 흡기다기관 클리닝과 인젝터 클리닝을 동시 수행한 결과는 각각 수행한 결과보다 매연을 75.2% 감소시켰다. 또한, 흡기다기관 클리닝과 인젝터 클리닝을 동시 수행한 결과는 검사 후 8.5초부터 배출허용 기준 30%이하를 만족하였다.