• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• Journal of the Korean Data and Information Science Society
• /
• 제19권3호
• /
• pp.893-901
• /
• 2008

The disconfirmation paradigm is the earliest researched and the most deeply researched of all the paradigms in marketing. Disconfirmation paradigm deals with the influence of expectation, perceived product performance, and the discord between the two on consumer satisfaction. The GAP-Model is based on the disconfirmation paradigm that tries to understand the effect of the gap between before purchase expectations and after purchase perceptions of the product performance on dependent variables such as customer satisfaction. The purpose of this research is to test whether regression coefficients of a P-Model(performance only model), an E-Model(expectation only model) and GAP(P-E)-Model are equivalent in explaining service value and loyalty. The Chow's F-Test is used to test the excellence of the 3 models. As a result of comparison and analysis, P-Model showed more excellence of service value and loyalty than E-Model or GAP-Model.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.

• 대한교통학회지
• /
• 제4권2호
• /
• pp.3-14
• /
• 1986

This study was undertaken to develop the gap acceptance model of left-turn drivers on the major road at intersections. Typical unsignalized intersections on the two-lane and four-lane streets in Masan City were selected for the study intersection. For the gap distribution model, the lognormal, negative exponential, shifted negative exponential, and Gamma distributions were tested using the x2 and K-S tests. Based on the results for both streets, it was concluded that among the distributions tested the lognormal distribution represented the gap distribution best, followed by the shifted negative exponential distribution. Stochastic models of the gap-acceptance behavior of left-turn drivers on the major road at unsignalized intersections were programmed using SLAM Ⅱ, a simulation computer language. A stochastic model was selected for the gap-acceptance behavior to compare the results of the simulation with the observed data. The model assumes that a fixed critical acceptance gap is assigned to each left-turn driver based on a normal distribution and the gap distribution of the opposing traffic stream follows the shifted negative exponential distribution.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.344-357
• /
• 1995

핵연료 소결체와 피복관 사이의 간극 크기에 크게 좌우되는 간극 열전도도는 연료봉내 초기 저장에너지 양에 중요한 영향을 끼친다. 정상상태 계산용 ELESTRES 코드에서 사용 중인 수정된 Ross-Stoute 의 간극 열전도도 모델은 단순한 열적 변형 모델에 기초한다. 최근의 실험에서 핵연료 소결체가 연소됨에 따라서 균열, 소결체 재배열 등이 발생되고, 피복관 내부의 편심에 위치하게 된다는 것이 알려졌다. 본 논문에서는, 최근에 제안된 편심형 간극 모델과 소결체 재배열형 간극 모델 등이 기술되었고, 실험 조건과 중수로 핵연료봉의 운전조건 하에서의 소결체와 피복관 사이의 간극 열전도도를 계산하는데 이용되었다. 실험 치와 계산치가 잘 일치됨으로써, 수정된 Ross-Stoute 모델이 ELESTRES 코드 내에서 사용된 열전달 관련 가정들과 잘 부합됨을 보여 주었다. 출력 경계곡선을 따라서 수정된 Ross-Stoute 모델로 계산된 간극내 열전달과 핵연료 표면 온도 등이 편심형 간극 모델과 소결체 재배열형 간극모델에 의한 예측치보다 보수적이었다.

• 한국유통학회지:유통연구
• /
• 제1권2호
• /
• pp.29-52
• /
• 1996

The objective of this study is to test Parasurman, Zeithaml & Berry(1985)'s service quality gap analysis model, and to confirm reliability and to confirm reliability and validity of the model. The reliability of the model is adopted, but the validity must be retested in the further study. In the results of the gap analysis model, the correlation between consumer expectations and management perceptions of consumer expectations(gap1) was not accepted. The correlation between management perceptions of consumer expectations and service quality specifications(gap2), the correlation between service quality specifications and the service actually delivered(gap3), and the correlation between services delivered and services promised to consumers(gap4) were accepted. To improve domestic telecommunication service quality, practical guides such as standardization of job roles, cooperation among customer-contact persons, communication between managers and employees, evaluation programs for employee's improvement of service quality, appropriate supports for customer-contact persons were suggested. For generalizing the gap model, additional studies under the different contexts and industries will be needed.

• Management Science and Financial Engineering
• /
• 제16권2호
• /
• pp.17-27
• /
• 2010

The customer churn and the forecast of customer churn have been important research topics for a long time in the academic domain of customer relationship management. The customer value is studied to construct a gap model based on dual customer values; a basic description of customer value is given, then the gaps between products and services in different periods for the customers and companies are analyzed. The main factors that influence the perceived customer value are analyzed to define the "recognized value gap" and a gap model for the dual customer value is constructed. Based on the dual customer gap a con-ceptual model to determine potential churn customers is proposed in the paper.

• International Journal of Contents
• /
• 제13권4호
• /
• pp.47-62
• /
• 2017

This paper analyzes how much the gap existed between the public group and expert group using future issues and future core technologies that are announced in government institutions based on ontology. We calculated gap with two groups' point of view, one is expert groups' ideas that are based on future hopeful technologies documents, and another is public people ideas that are based on documents of contest that is hosted by 'Ministry of Science, ICT and Future Planning (MSIP)', and 'Institute for Information & communications Technology Promotion (IITP)'. For calculating these, we suggested SDGM model. In the case of ETRI Meta-trend ICT Field, there is a little gap between expert group and public group, and another case that is XT (ETRI determined future technologies excluding ICT field) Field, the gap is increasing annually. Moreover, in the case of all ETRI Meta trend, the gap is bigger than ICT and XT field. We analyzed, also, KEIT's future issues for generalizing this model. The gap existed between two groups. Utilizing SDGM model of this paper, people can interpret easily how much the gap exists between future technologies and issues that are announced in institutions.

• 대한교통학회지
• /
• 제30권2호
• /
• pp.93-100
• /
• 2012

이 연구는 국내 회전교차로의 임계간격을 다루고 있다. 이 연구의 목적은 국내 회전교차로의 수락 및 거절간격모형을 개발하고, 회전교차로의 임계간격을 도출하는데 있다. 이를 위해 이 연구에서는 국내 20개 회전교차로의 수락간격과 거절간격 자료를 수집하는데 중점을 두고 있다. 연구의 주요결과는 다음과 같다. 첫째, 국내 20개 회전교차로 통행에 대한 동영상 프레임분석을 통해 수락간격과 거절간격이 측정하였다. 이러한 자료를 바탕으로 로짓모형을 이용하여 통계적으로 유의한 수락간격 모형이 개발되었다. 둘째, 위의 개발된 모형을 바탕으로 산출된 회전교차로의 임계간격은 2.584초로 분석되었다. 아울러 도시지역의 임계간격은 2.744초, 지방지역은 2.416초인 것으로 분석되었다. 마지막으로 국내 회전교차로의 임계간격이 국외 회전교차로의 임계간격 보다 약 1.5~2.5초 더 적은 것으로 평가되었다.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.627-631
• /
• 2012

Observable mathematical model of DDM (Direct Dirve Motor) was suggested. The motor that operates the object system directly is called DDM. DDM has many strong points, however, it has a significant disadvantage, that it is more sensitive to the external force than the motor with reduction gear. In other word, if the force is applied, air gap of the motor can be perturbed. This causes not only difficulty in motor control but also even more serious problem, such as the breakdown of motor. However, if the air gap variation can be estimated, it can help prevent these problems. DDM should be modeled to estimate the air gap variation. The type of researched DDM is PMSM (Permanent Magnet Synchronous Motor) and precedent model of PMSM includes only characteristics of electro-magnetic system and rotational motion. However, suggested model should also include characteristics of translational motion of rotor to estimate the air gap variation. Also, this model should satisfy observability condition, because state observer is designed based on this model.