• Journal of radiological science and technology
• /
• v.47 no.2
• /
• pp.87-95
• /
• 2024

Most knee axial radiographs, known as sunrise and skyline view, were performed with the patient in the prone position. The authors tried to address some of the shortcomings of conventional radiography by developing a new radiography method, K-RAD. According to previous research, the K-RAD method showed a wider patellar-femoral joint space than conventional radiography and provided a clear patellar hemi-lateral image with a constant gap between the femoral trochlear groove and tibial tuberosity. The authors worked with an orthopedic specialist to perform radiography using the K-RAD method rather than using existing methods, and as a result, the two knees were aligned correctly and a clear image of the patellar-femoral joint space was created. The authors propose the K-RAD method for knee axial radiography because the K-RAD method provides a sense of stability to the patient and provides images with high diagnostic value.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.97-104
• /
• 2015

Purpose - The distribution of agricultural products is changing due to recent shifts in environmental free trade. Specifically, the competitiveness of domestic agricultural products has weakened as a result of the Korea-China Financial Trade Agreement. Agricultural producers are faced with increasing difficulties and organized production centers are growing in importance daily. To overcome this crisis, agricultural producer organizations are vying for environment-friendly agricultural certifications, Good Agriculture Practices (GAP) and Hazard Analysis and Critical Control Point (HACCP). In particular, as consumer demand for higher safety grows, farmers are increasing their certification rates. Therefore, this certification system is expected to help strengthen the competitiveness of agricultural producer organizations. Research design/data/methodology - Organized production centers are classified by certification. A survey was conducted with 91 organizations using factor analysis and logistic regression analysis for the examination. The factor analysis results are as follows. Raw material procurement, education·specialization, marketing, joint business, organizing ability, business management, effectiveness, certification, and larger organizations were classified as the nine types of factors. These factors affect the organized production centers and are used in the logistic regression analysis. The purpose of such research and analysis is to suggest a direction for future production center policies. Results - The basic statistical results are as follows: analysis of the producer organizations of 91 sites, average number of members per site of 1,624, and average sales of 25,961 million won. Additionally, the average income per farmer is 175 million won, and the pooling system rate is 53.5%. The factor analysis results are as follows. Factor 1 consists of contract cultivation, ongoing shipment, selection subdivision, traceability, and major retailer management. Factor 2 consists of manual cultivation, specialty selection, education program, and R&D. Factor 3 consists of advertising, various dealers, various sales strategies, and a unified sales counter. Factor 4 consists of agricultural materials co-purchase, policy support, co-shipment, and incentives. Factor 5 consists of the co-selection and pooling system. Factor 6 consists of co-branding and operating by the organization's article. Factor 7 consists of the buy-sell ratio and rate of operation of the agriculture promotion center. Factor 8 consists of bargaining power in volume and participation rate of farmer certification. Factor 9 consists of increasing new subscribers. The logistic regression analysis results are as follows. Considering the results by type of certification, the environment-friendly agricultural certification type and the GAP certification type have a (+) influence. GAP and HACCP certification types affecting the education·specialization factor have a (+) influence. Considering the results for each type of certification, the environment-friendly agricultural certification types on the effectiveness factor have (-) influence; the HACCP certification types on the organizing ability and effectiveness factor have a (-) influence. Conclusions - Agricultural producer organizations should develop plans as follows: The organizations need to secure education for agricultural production; increase the pooling system ratio for sustainable organizational development; and, finally, expand the number of agricultural producer organizations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.167-174
• /
• 2010

In this study, the optimal position for the backrest pivot of an office chair was investigated by evaluating its performance in terms of the lumbar support and sliding distance of the back from the backrest during tilting motions. The simulation was performed using a mathematical model, which included a human body and a chair. Forty-two backrest pivot points were selected on the sagittal plane around the hip joint of a sitting model. A motion analysis study was also performed using a prototype of an office chair (A-type) with a backrest pivot located on the hip joint of a normal Korean model and a typical office chair (B-type) with its pivot located under the seat. The simulation results showed that both the lordosis angle and the slide distance of the back were minimized when the backrest pivot was positioned close to the hip joint. The experimental results showed that the slide distance and gap between the sitter's lumbar and the backrest was smaller with the A-type than the B-type. Based on the simulation and experimental results, it can be concluded that the backrest can support the sitter's lumbar area more effectively as the pivot position for reclining approaches closer to the hip joint. In this position, the sitter can maintain a comfortable and healthy sitting posture. This paper presents the methods and guidelines for designing an office chair with ergonomic considerations.

• Journal of radiological science and technology
• /
• v.42 no.6
• /
• pp.423-428
• /
• 2019

The Precise measurement of the knee's Congruence angle is required for diagnosis of patella dislocation. The purpose of this study is to consider the distortion diagram and usefulness about the test of the bilateral side and one side through the evaluating congruence angle from Merchant view of patellofemoral joint to central X-ray. We've evaluated the sulcus angle and Congruence angle following central X-ray's changes when we took Merchant view of patellofemoral joint aimed to right lower limb from human whole body phantom. The subject of the evaluation was classified as normal group and varus group, and the varus group has experimented with External rotation of legs as 15° and 30°. When normal groups result as 0, 7.5, 15 cm, it was measured as 17.25 ± 1.34°, 19.60 ± 1.41°, 20.55 ± 1.77° each. The gap between minimal and maximum angle was 3.3°, and the value was shown as getting bigger when it further away from the centeral X-ray. When Congruence angle in 15° varus group was 0, 7.5, 15 cm, it was each 16.45 ± 1.34°, 17.10 ± 0.99°, 17.80 ± 1.13°. And when Congruence angle in 30° varus group was 0, 7.5, 15 cm, it was measured each 18.35 ± 1.63°, 18.95 ± 1.06°, 19.60 ± 1.41°. The difference between minimum and maximum of angle in 15° varus group and 30° varus group was each 1.35° and 1.25°, the angles have shown as increasing the further away from the center. The patellofemoral joint showed that the congruence angle increases as the further away from Central X-ray, and also it is judged that is possible to change the congruence angle by a degree of varus knee. Thus, accurate measurement of the congruence angle is shown to advantage that methods for examining by split each side at two times than methods for examining both sides at a time. Therefore, it is expected to helpful on the diagnostic side of patella dislocation and subluxation.

• The Journal of the Korean dental association
• /
• v.48 no.7
• /
• pp.514-521
• /
• 2010

The relationship between dental occlusion to temporomandibular Joint (TMJ), systemic symptoms and health has been discussed and theoretical reasons have been the foundation for treatments performed by various areas of alternative treatments. It has been noted that there have been increase in the available methods and treatments for the general public regarding these areas of treatment modality. Korean Academy of Stomatognathic function and Occlusion have carried out literature review of five of those treatment theories available; they are Craniosacral mechanism, Osteopathy, Myodontics, Chirodontics, Dental distress syndrome and Quadrant theorem. Each of these modalities will be introduced and brief summary of their efficacy and efficiency will be discussed.

• Journal of Welding and Joining
• /
• v.24 no.6
• /
• pp.33-38
• /
• 2006

Since the 1990's, European shipbuilding industries introduced hybrid welding process in order to decrease thermal distortion of welded joints in passenger shipbuilding. In this study, we investigated effects of hybrid welding parameters on the toughness of weld metal using DH36 steel in order to obtain more sound welds in passenger shipbuilding. Type of leading process, joint gap distance and chemical composition of consumables were considerably correlated with the toughness of weld metal. Especially, the toughness was considerably increased with high-Ti containing consumables. In addition, hybrid welding speed increased by using plasma cut edges, the oxides layer of which increased absorption efficiency of laser beam.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1854-1861
• /
• 1996

A reliable and practical finite element modeling technique to estimate the behavior of complex structures with bolted joints is important for engineeres in the industry. Accordingly, we have examined several simplified modeling techinques which do not require the use of special elements such as a gap eloement. The dynamic and static erxperiments have confirmed that the technique to model the bolted joints with eight-noded three dimensional elemnts which fill the bolt space gdives most satisfactory results.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.60-65
• /
• 2003

At present. welding of most pipes with large diameter is carried out by the manual process. Automation of the welding process is necessary f3r the sake of consistent weld quality and improvement in productivity. In this study, two vision sensors, based on the optical triangulation, were used to obtain the information for seam tracking and detecting the weld defects. Through utilization of the vision sensors, noises were removed, images and 3D information obtained and positions of the feature points detected. The aforementioned process provided the seam and leg position data, calculated the magnitude of the gap, fillet area and leg length and judged the weld defects by ISO 5817. Noises in the images were removed by using the gradient values of the laser stripe's coordinates and various feature points were detected by using an algorithm based on the iterative polygon approximation method. Since the process time is very important, all the aforementioned processes should be conducted during welding.

• Journal of Korean Library and Information Science Society
• /
• v.14
• /
• pp.149-179
• /
• 1987

The concept of a "switching language " between different indexing languages and information retrieval systems has been discussed since the mid-1960s. Some preliminary investigates into the feasibility of switching between mediating tool yielded positive results. The Broad system of ordering(BSO) , a general classification scheme for information exchange and switching, has been under development as a joint FID/UNESCO project since 1973. The purpose of this study is to find out the origin, development, definition, and principle of BSO. The results of the study can be summarized as follows: (1) BSO is a switching language for the purpose of interconnection of information system which is located different regions, or using different indexing languages. (2) BSO is in effect, fully faceted and broad classification system. (3) BSO is not only a subject code but also an ordering system. (4) BSO can be used information retrieval system because the notation of composite subjects is formed by combining notation. (5) BSO has to some extent sacrificed brevity by leaving large unused notational gap for future use. (6) The structure of the scheme is in no way dependent upon the notation. notation.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.101-106
• /
• 2002

Requirements to fabrication processes for arc welding of highly loaded thick-walled joint and problems of research and development in term s of the tendency for the modern aircraft structure development are outlined. A justified, choice of the development line of the new promising welding processes for solution of these problems is presented. A complex of new welding processes and technologies for making highly reliable joints with different thickness (up to 120 mm and more) and length of weld (up to 0.1 m; 0.1-0.5 m and more than 0.5 m) has bee developed. It is shown that the possibility to control the heat flow distribution over the groove surface of the welded joints provides for improved reliability. The new welding processes are equipment are effectively used in serial production of the Mykoyan md Sukhoi supersonic aircrafts as well as in AN-124 Ruslan and AN-225 Mriya wide body aircrafts.