• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.293-296
• /
• 2002

In this paper, we proposed a beam tilting microstrip patch array antenna for the reception of satellite signals by using low cost copper etched polyester films and foams. The configuration and coupling mechanism of the proposed antenna are similar to the dipole Yagi-Uda antenna. It is composed of 3 layers of polyester films and three layers of foam. In order to prevent unwanted radiation and coupling loss by microstrip feeding networks and parasitic patches, a stacked layer with rectangular slots above the driver patch array is inserted. The 16${\times}$8 element microstrip Patch way antenna is Presented by experimental results. Its beam patterns are affected by many parameters such as sizes of the patches, gap between the patches. characteristics of the substrates, feeding method, etc. Owing to its complexities of various design parameters, both simulation and experiment were performed. The fabricated antenna received DBS signal from KOREASAT 3 by doing nothing but adjusting azimuth direction.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.678-681
• /
• 2000

Contactless battery charger with a "더" type core is proposed in this paper. The proposed take-apart transformer maintain a high coupling coefficient in spite of air gap. The ZV-ZCS method is used for the efficiency and stable opeation of the system.he system.

• 전력전자학회논문지
• /
• 제20권3호
• /
• pp.262-272
• /
• 2015

An integrated two-in-one transformer applicable to PSUs for a 120 W LED TV is proposed. This transformer comprises a PFC inductor and an LLC transformer placed and integrated on an E-I-E type magnetic core. Performance is evaluated by observing the coupling coefficients of the proposed two-in-one transformer under various air gap topologies. Among the topologies studied, an integrated transformer with centered air gap shows stable operational characteristics with a minimized mutual coupling (interference). Furthermore, applicability of the proposed integrated transformer to PSUs for a 120 W LED TV is studied from the viewpoint of integrating different magnetic components into one core, resulting to low weight, low cost, and high power density.

• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.12-17
• /
• 2021

The electronic and magnetic properties for Mn-adsorbed on the chalcopyrite (CH) AlGaP2 semiconductor are investigated by using first-principles FPLMTO method. The clean CH-AlGaP2 without adsorbed Mn is a p-type semiconductor with a direct band-gap. The Mn-adsorbed CH-AlGaP2 exhibits the ferromagnetic state. It is more energetically stable than the other magnetic ones. The interstitial site on P-terminated surface is more energetically favorable one than the Al/Ga-terminated surface, or the other adsorbing sites. In the case of Mn-adsorbed Al/Ga-terminated surface, it is induced a strong coupling between Mn-3d and neighboring P-3p electrons. The holes of partially unoccupied minority Mn-3d state and majority (or minority) Al-3p or P-3p state are induced. Thus a high magnetic moment of Mn is sustained by holes-mediated double-exchange coupling. It is noticeable that the semiconducting and half-metallic characteristics of CH-AlGaP2:Mn thin film is disappeared.

• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.515-525
• /
• 2022

The wireless power transfer (WPT) charging system for AGV depends highly on the coupling conditions due to air gap variation. To attain stable output power with high transfer efficiency under various coupling conditions, a single-stage, DC-DC converter that operates with robustness to changes in air gaps is proposed for the WPT system. The proposed converter is capable of soft switching under the set input voltage (V_in: 380 V_DC), load conditions (0-1 kW), and air gap changes (30-70 mm). In addition, a wide output voltage range (Vo: 39-54 V_DC) can be controlled by varying the link voltage due to the phase control at a fixed switching frequency. Experimental results are verified using a prototype of a 1 kW wireless power charging system.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.353-364
• /
• 1998

This paper describes the design processes and evaluation results of a small-sized six-axis force/torque sensor. The new six-axis force/torque sensor including S-type structure has been developed using a parallel plate structure as a basic sensing element. In order tominimize coupling errors, the location of strain gages has been determined based on the finite element analysis and the connections of strain gages have been made such that the bridge circuit with 4 strain gages becomes balanced. Several design modifications result in a similar strain sensitivity for six-axis forces and moments, and the reduced coupling errors of 2.6% FS between each forces and moments. Calibration test results show that the six-axis load cell developed which has light weight of 135g and the maximum capacities of 196 N in forces and 19.6 N.m in moments is estimated to be within 7.1% FS in coupling error.

• 한국광학회지
• /
• 제17권2호
• /
• pp.120-126
• /
• 2006

격자 구조형 평면도파로와 원통형 광섬유로 구성된 격자구조형 광섬유 결합기(GAFC)를 제안하였고, 그 최적 전력결합 특성을 종방향 모드 전송선로이론(L-MTLT)에 기초하여 분석하였다. 또한, 격자 구조형 평면도파로에서 입사된 광신호가 단일 모드 광섬유로 결합되기 위한 새로운 최적 조건들을 제시하였다. 수치해석 결과 GAFCs에서 최적 전력결합 특성은 기존에 널리 사용하는 위상정합 조건이 아닌 새로운 조건(즉, 정확한 모드의 최소간격 조건)에서 나타났다.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.175-180
• /
• 2019

새로운 고유치 문제에 기초한 모드 전송선로 이론 (Modal Transmission-Line Theory: MTLT))을 이용하여 blazed 격자 구조형 방향성 결합기 (B-GADC)의 광학 특성과 채널사이의 전력전달을 자세하게 분석하였다. 설계한 B-GADC의 결함효율을 분석하기 위하여 격자주기와 파장에 따라 변하는 quasi-TE 모드와 quasi-TM 모드의 분산곡선을 수치 해석하였으며, blazing 특성이 GADC의 결합효율에 미치는 영향을 분석하기 위하여 대칭형, 톱니형 그리고 비대칭형 blazed 격자구조를 설계하고 평가하였다. 수치해석 결과, blazed 격자구조가 대칭형에서 비대칭형으로 변함에 따라 최대 전력전송을 위한 최소 간격 조건을 만족하는 격자주기는 줄어들었으며 결합길이는 반대로 늘어나는 것을 확인하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권7호
• /
• pp.205-217
• /
• 2022

The purpose of this study was to explore the relationship between agricultural insurance, agricultural loans, and the agricultural industry and find ways to consolidate and improve the interactive development between these three systems. We collected relevant data from 2009 to 2019 in 15 provinces of China and constructed a coupled coordination model to analyze the data. The results are as follows: First, the eastern part of China was ahead of the central and western parts in terms of agricultural loans and the agricultural industry, while the western part was ahead of the central and eastern parts in terms of agricultural insurance. Second, the coupling degree of the three systems in all 15 provinces reached an extremely high level. Third, all 15 provinces showed an overall continuous rise in coupling coordination degree. In 2019, eight provinces reached the medium-level coupling coordination development, and seven provinces were in a state of barely coupling coordination development. The three systems formed a mutually reinforcing relationship and basically entered a state of coordinated development. Finally, there was a great development gap between different regions of China concerning the coordinated development of the three systems, therefore, innovative development is urgently needed to further promote the coordinated development level.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1095-1100
• /
• 2003

Experimental studies on the aerodynamic coupling effect on natural frequencies, critical speed and flutter instability of DVD disks are investigated in this paper. The experimental results are compared with the theoretical analyses where the aerodynamic effects are represented in terms of elastic, lift and damping and stiffness components. The experiments are performed using a vacuum chamber and DVD disks rotating in vacuum, open and enclosure with several different gaps between disk and wall. The following three results are given. One is that the aerodynamic effect by the surrounding air reduces the natural frequencies and critical speeds of the vibration modes. The second is that natural frequency decreases as the disk-wall gap is decreased. Finally, it is shown that the disk vibration is reduced as the gap between the disk and the rigid wall decreases.