• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.625-636
• /
• 2017

Dyslipidemia, hypertension, and diabetes are well-established risk factors for cardio-cerebrovascular disease (CVD). Although the prevalence of dyslipidemia among Korean adults is very high, its management is known to be poor. The aim of this study was to assess the prevalence, awareness, treatment, and control rates of dyslipidemia among adults aged 30 years and older in Gangwon-do, Korea. Analysis included 58,121 adults (29,123 males and 28,998 females) participating in the 2013-2014 Korea National Health Screening Program (KNHSP). Dyslipidemia was defined according to the treatment criteria rather than the diagnostic criteria in Korea. Therefore, high-low-density lipoprotein cholesterol (LDL)-cholesterolemia was deemed present in individuals with LDL-cholesterol levels that exceeded the appropriate risk-based threshold. The age-standardized prevalence was highest in dyslipidemia (32.5%), followed by hypertension (25.1%), and diabetes (9.4%). The awareness rate was 76.7% for hypertension and 74.7% for diabetes, but only 10.6% for dyslipidemia. The lowest patient treatment was found for dyslipidemia (9.4%). The control rate among those undergoing treatment was highest for hypertension (75.8), followed by dyslipidemia (63.3%), and diabetes (43.9%). The higher CVD-risk categories showed lower control rates of hyper-LDL-cholesterolemia. The prevalence of dyslipidemia was higher than hypertension and diabetes, but awareness and treatment rates were lower. Our findings indicate there is a wide gap between the prevalence of dyslipidemia and subsequent treatment, which suggests that effective strategies are required to improve dyslipidemia management. It would be worthwhile to strengthen the follow-up management of patients with dyslipidemia in the KNHSP, especially for the high risk group of CVD.

• Korean journal of food and cookery science
• /
• v.26 no.2
• /
• pp.220-228
• /
• 2010

This study was designed to examine the effectiveness of an unused tunnel as a rice storage place. The physicochemical changes of rice grains were investigated during 8-months of storage in the tunnel located at Kyungnam province, Korea. Two kinds of tunnel stored rices, NP(rice grown with no pesticides) and LP(rice grown with less pesticides) were compared with $5^{\circ}C$ stored rice as a control. The peroxidase activities, as an index of freshness of rice grains, gradually decreased and NP appeared to be fresher than LP. Whiteness, grain wholeness, and chalkyness were less desirable for the tunnel stored rice than the control, with no significant difference of physicochemical properties, including the broken, damaged, colored rice, and contents of moisture, protein, and amylose. Palatability dropped below 70 in all three groups at later phase. The sensory evaluation showed that overall preference was slightly higher for the control but not significantly different from the other two groups. From all the evidences shown, unused tunnels may be an effective place for a long-term rice storage, since the average temperature inside the tunnel was maintained very constantly around $14.3^{\circ}C$ and relative humidity was optimal for rice storage, especially during spring and summer seasons.

• Journal of agricultural medicine and community health
• /
• v.17 no.1
• /
• pp.34-45
• /
• 1992

In this county, the gap between the urban 'haves' and the rural 'have-nots' continues to be an increasing problem. WHO and UNICEF see primary health care(PHC) as the key to achieving an acceptable level of health throughout the world as a community development. PHC is essential health care made accessible to individuals and families in the community by means acceptable to them. It is the first level of contact of individual, the family, and community with the national health system. It includes at least education on health system. It includes at least education on health problems, promotion of food supply, MCH including family planning, immunization against infectious diseases, control of endemic diseases, treatment of common diseases and injuries, promotion of mental health, and provision of essential drugs. However, of the aboves, education concerning of mental health problems and the methods to identify, prevent, and control them is the principal step of establishment. In Korea, the category of PHC worker includes the physician as public doctor and nurse as primary health care practitioner and community health leader as village health worker. PHC workers of the aboves will thus function best if they are appropriately trained to respond to the health needs of the community. However in this country, since the national PHC service project launched in 1980, the government has not developed and performed appropriate and enough education and training activities. In light of above reasons, several categories of health education activities had been planned and performed being aimed at above specific target groups and the main focus was on the village health workers for about one year from July 1991 to July 1992 in Yeoju Kun of Kyonki Province. At the end of the period, evaluation of education input was carried out to measure the improvement of healthful life of people in terms of awareness, attitude, and practice. At the end of the period, evaluation of education input was carried out to measure the improvement of healthful life of people in terms of awareness, attitude, and practice. The totals of 80 village health workers, 13 public health practitioners and 9 public docters took in the course of health education for a few hours at every month and the evaluation works of educational effect were taken. The results the study were as follows. 1) Number of persons who realized the maxim "health care of the people is a duty of the government" increased after the education course, On the other hand, the rate of satisfaction on the effort of government for health promotion of the people decreased. 2) Public doctors and primary health care practitioners(nurses) liked and enjoyed the education schedule as a meeting of peer group. It provided chances of communication with staffs of Korea University Hospital. It was said that lectures covered great deal of knowledge and technic they urgently needed in the field. 3) After finishing the education course, more of village health workers(VHW) thought they adapted themselves to their roles and functions showing increased number of home visit and contact with primary health care practitioners by month. 4) In case of patient refer, VHW preferred primary health care practitioners to public doctors. 5) Capability of VHWs in most of their functions increased dramatically after when the education course finished except tuberculosis control.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.57-63
• /
• 2016

Though a valve is a very important part in a system to control properly, it has potential failure caused by gap from valve stem to ball connection, and abrasion, crack, fixation causing operational trouble and accidents. 64% of the valve failure in the real case was the failure of airtightness and most accidents of leakage and explosion were occurred while fixing the failure. While there are no proper safety manual, maintenance procedure and regulation for industrial valves excluding safety valve, safety management for the valves is left to the discretion of the maintenance company. Strict maintenance that removes hazards and emergency response procedure are required to prevent and reduce the loss of accident. This study suggests safety enhancement measures through valve monitoring by investigating the status of use of valve and current maintenance. Enhancement of gas safety management can be acquired by a monitoring system that provides diagnosis for valve status, monitoring real-time gas leakage, management of entire cycle lifetime that can reduce maintenance cost.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.105-105
• /
• 2009

$ZrO_2$ is one of the most attractive high dielectric constant (high-k) materials. As integrated circuit device dimensions continue to be scaled down, high-k materials have been studied more to resolve the problems for replacing the EY31conventional $SiO_2$. $ZrO_2$ has many favorable properties as a high dielectric constant (k= 20~25), wide band gap (5~7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2/Si$ structure. In order to get fine-line patterns, plasma etching has been studied more in the fabrication of ultra large-scale integrated circuits. The relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compound In this study, the surface kinetic properties of $ZrO_2$ thin film was investigated in function of Ch addition to $BCl_3/Ar$ gas mixture ratio, RF power and DC-bias power based on substrate temperature. The figure 1 showed the etch rate of $ZrO_2$ thin film as function of gas mixing ratio of $Cl_2/BCl_3/Ar$ dependent on temperature. The chemical state of film was investigated using x-ray photoelectron spectroscopy (XPS). The characteristics of the plasma were estimated using optical emission spectroscopy (OES). Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.123-137
• /
• 2004

The study on traffic assignment is actively being performed which reflect networks status using time. Its background is increasing social needs to use traffic assignment models in not only hardware area of road network plan but also software area of traffic management or control. In addition, multi-class traffic assignment model is receiving study in order to fill a gap between theory and practice of traffic assignment model. This model is made up of two, one of which is multi-driver class and the other multi-vehicle class. The latter is the more realistic because it can be combined with dynamic model. On this background, this study is to build multidynamic model combining the above-mentioned two areas. This has been a theoretic pillar of ITS in which dynamic user equilibrium assignment model is now made an issue, therefore more realistic dynamic model is expected to be built by combining it with multi-class model. In case of multi-vehicle, FIFO would be violated which is necessary to build the dynamic assignment model. This means that it is impossible to build multi-vehicle dynamic model with the existing dynamic assignment modelling method built under the conditions of FIFO. This study builds dynamic network model which could relieve the FIFO conditions. At the same time, simulation method, one of the existing network loading method, is modified to be applied to this study. Also, as a solution(algorithm) area, time dependent shortest path algorithm which has been modified from existing shortest path algorithm and the existing MSA modified algorithm are built. The convergence of the algorithm is examined which is built by calculating dynamic user equilibrium solution adopting the model and algorithm and grid network.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.148-172
• /
• 1997

Sixty human premolar teeth were used for this in vitro study. After each tooth was sectioned mesiodistally, one half was used for the experimental group and the other half for the control. Three groups were made for each fluoride applying method and twenthy teeth were assigned to each group. Ten teeth were used for evaluating total fluoride amount and the other ten were used for firmly-bound fluoride. Fluorshield was used for fluoride-releasing sealant and 1.23% APF, 0.05% NaF were used for topical application fluorides. Each tooth was cleaned with a tooth brush using nonfluoride containing pumice before the experiment. In the sealant group, fluoroshield was applied to the enamel surface without etching procedure and stored in $37^{\circ}C$ saline for 30 days. After 30 days, sealant was removed with explorer without scratching the enamel surface and washed with distilled water and dried. In the APF group, each tooth was immersed in 1.23% APF for 30 min then washed and dried in the same manner. In the NaF group, each tooth was immersed in 0.05% NaF for 24 hours then washed and dried as described above. After each fluoride regimen was applied, ten teeth were randomly selected from each group and immersed in 1M KOH solution for 24 hours to remove loosely-bound fluoride possibly deposited by the three different fluorides applied. In each group, total fluoride amount deposited and the amount of enamel removed by acid biopsy were calculated. After loosely-bound fluoride was removed, firmly-bound fluoride deposited and the amount of enamel removed by acid biopsy were also calculated. Total fluoride amount deposition was significantly increased in the APF and NaF groups, but not in the sealant group. Amount of enamel removed by acid-biopsy was also significantly diminished in the APF and NaF groups, but not in the sealant groups. After loosely-bound fluoride was removed from each groups, no statistical difference was found in the amount of firmly-bound fluoride in any groups. Also no effect of firmly-bound fluoride on enamel dissolution was shown in any groups after loosely-bound fluoride was removed from each group. In conclusion, topical application method of APF or NaF is more effective than fluoride-releasing sealant application to make $CaF_2$ coating on enamel surface and $CaF_2$ coating is the main source for anticariogenic effect of fluoride. However, longterm anticariogenic effect of fluoride-releasing sealant should be further evaluated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.9
• /
• pp.751-759
• /
• 2015

In this study, we investigate the Characteristics of the flowfields of a circular cylinder having a small triangular prism at the upstream side. We measure the fluid force on the circular cylinder and obtain a visualization of the flow fields using particle image velocimetry (PIV). The experimental parameters employed were the width ratios (H/B = 0.2~0.6) of the triangular prisms to the circular cylinder's diameter, and the gap ratios (G/B = 0~3) between the circular cylinder and the triangular prism. We observed that the drag reduction rate and Strouhal number of the circular cylinder increased and then decreased with G/B in the case of the same H/B. The drag reduction rate increased with H/B in the case of the same G/B. In the case where the circular cylinder had a small triangular prism, the stagnation regions were represented in the upstream and downstream sides of the circular cylinder.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.21-30
• /
• 2017

The surface temperature of disc brakes varies during braking, which can affect the friction and wear behavior of braking systems. In order to develop an efficient braking system, the friction and wear behaviors of brake materials need to be clearly understood. In this work, the friction and wear behavior of the C/C-SiC-Cu composite and the Al/SiC composite, which are used in disc braking systems, were investigated. Both the surface temperature and contact pressure were studied. A pin-on-reciprocating tribotester was used for this purpose, in order to control temperature and load. Results showed that the friction varied significantly with temperature and sliding distance. It was found that a transfer layer of compacted wear debris formed on the wear track of the two materials. These layers caused the surface roughness of the wear track to increase. The outcome of this work is expected to serve as a basis for the development of braking systems under various operating conditions.