• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.470-478
• /
• 1997

The purpose of this study was to investigate the effects of moistening mechods of dentin on the morphologic states of hybrid layers and on the interfacial bond strength between dentin and composite. Specimens were divided into 6 groups based on the surface moistening methods and materials used. After the dentin surface was conditioned with 10 % phoporic acid and irrigated: 1. The dentin surface was dried. Then bonding agent and composite were applied. 2. The dentin surface was blot-dryed. Then primer, bonding atent and composite were applied. 3. The dentin surface was dryed first. Within 20 seconds, the surface was rewetted, then primer, bonding agent and composite were applied. 4. The dentin surface was dryed. Then primer, bonding agnent and composite were applied. 5. The dentin surface was dryed first. Atter 24hrs, the surface was rewetted, and then primer, bonding agent and composite were applied. 6. The surface was conditioned with NaOCl for 5min. Then primer, bonding agent and composite were applied. To reveal the hybrid layer, scanning electron microscopy was used after the samples were ion beam etched. The shear bond strength of each group was tom pared by ANOVA. In groups 2, 3 and 4, the hybrid layer was clearly visible, but the width was more limited in group 4. In group 1 and 5, the hybrid layer was not found, and a gap was formed between dentin and composite. In group 6, the hybrid layer was not found, but the interface between the dentin and composite was intimate. The shear bond strength of each group was as follows: Group 1 : 4MPa, Group 2 : 14MPa, Group 3 : 12MPa, Group 4 : 14MPa, Group 5 : 5MPa, Group 6 : 9MPa.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.162-162
• /
• 2010

InSb has received great attentions as a promising candidate for the active layer of infrared photodetectors due to the well matched band gap for the detection of $3{\sim}5\;{\mu}m$ infrared (IR) wavelength and high electron mobility (106 cm2/Vs at 77 K). In the fabrication of InSb photodetectors, passivation step to suppress dark currents is the key process and intensive studies were conducted to deposit the high quality passivation layers on InSb. Silicon dioxide (SiO2), silicon nitride (Si3N4) and anodic oxide have been investigated as passivation layers and SiO2 is generally used in recent InSb detector fabrication technology due to its better interface properties than other candidates. However, even in SiO2, indium oxide and antimony oxide formation at SiO2/InSb interface has been a critical problem and these oxides prevent the further improvement of interface properties. Also, the mechanisms for the formation of interface phases are still not fully understood. In this study, we report the quantitative analysis of indium and antimony oxide formation at SiO2/InSb interface during plasma enhanced chemical vapor deposition at various growth temperatures and subsequent heat treatments. 30 nm-thick SiO2 layers were deposited on InSb at 120, 160, 200, 240 and $300^{\circ}C$, and analyzed by X-ray photoelectron spectroscopy (XPS). With increasing deposition temperature, contents of indium and antimony oxides were also increased due to the enhanced diffusion. In addition, the sample deposited at $120^{\circ}C$ was annealed at $300^{\circ}C$ for 10 and 30 min and the contents of interfacial oxides were analyzed. Compared to as-grown samples, annealed sample showed lower contents of antimony oxide. This result implies that reduction process of antimony oxide to elemental antimony occurred at the interface more actively than as-grown samples.

• 건축역사연구
• /
• 제9권2호
• /
• pp.85-100
• /
• 2000

This paper is a study of the Beaux-Arts discipline of architecture, as it was established during the late nineteenth century in America. It focuses on trio particular modes of vision and representation that were at the heart of the discipline. The paper argues that Beaux Arts vision was centered on what may be called 'planar vision'; a mode of seeing through which the multiple aspects of the architectural design imbedded in the plan were read and re-interpreted. Similarly Beaux-Arts training in drawing required its student to draw within the multiple layers of historical traces; the new design being in effect a new layer placed on often unseen traces of monumental precedent. The theoretical basis of this practice was not based on history but on the concept of composition. Composition, in the French tradition was regarded more a matter of practice than theory. The Anglo-American discourse on composition, on the other hand, formed a body of theoretical literature based on formalist assumptions. There was, however, a fundamental gap between these formalist theories of composition and the 'layered' modes of vision and drawing involved in the design process. This practice leaned more on the modern romantic notion of 'intuition' for its theoretical basis, once again forming an immanent conflict with the mimetic practice of classical and historical architecture. The paper draws a picture of a discipline centered on a 'theory of the plan,' a potentially modern discipline integrated with classical forms and details. It was clearly effective as a practice. However, structured by conflicts between theory and practice, history and form, mimesis and intuition, the Beaux-Arts was unable to defend itself at the philosophical and theoretical level the modernists engaged their attacks on this system. At the same time, the paper poses the question of how different modern architecture is from this system. Is not the 'theory of plan,' in its many transformations and guises, still the central discipline of twentieth century modern architecture, and is it not structured by basically the same kind of conflicts and paradox that were immanent to the Beaux-Arts system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.191.2-191.2
• /
• 2015

Details of carrier dynamics in self-assembled quantum dots (QDs) with a particular attention to nonradiative processes are not only interesting for fundamental physics, but it is also relevant to performance of optoelectronic devices and the exploitation of nanocrystals in practical applications. In general, the possible processes in such systems can be considered as radiative relaxation, carrier transfer between dots of different dimensions, Auger nonradiactive scattering, thermal escape from the dot, and trapping in surface and/or defects states. Authors of recent studies have proposed a mechanism for the carrier dynamics of time-resolved photoluminescence CdTe (a type II-VI QDs) systems. This mechanism involves the activation of phonons mediated by electron-phonon interactions. Confinement of both electrons and holes is strongly dependent on the thermal escape process, which can include multi-longitudinal optical phonon absorption resulting from carriers trapped in QD surface defects. Furthermore, the discrete quantized energies in the QD density of states (1S, 2S, 1P, etc.) arise mainly from ${\delta}$-functions in the QDs, which are related to different orbitals. Multiple discrete transitions between well separated energy states may play a critical role in carrier dynamics at low temperature when the thermal escape processes is not available. The decay time in QD structures slightly increases with temperature due to the redistribution of the QDs into discrete levels. Among II-VI QDs, wide-gap CdZnTe QD structures characterized by large excitonic binding energies are of great interest because of their potential use in optoelectronic devices that operate in the green spectral range. Furthermore, CdZnTe layers have emerged as excellent candidates for possible fabrication of ferroelectric non-volatile flash memory. In this study, we investigated the optical properties of CdZnTe/ZnTe QDs on Si substrate grown using molecular beam epitaxy. Time-resolved and temperature-dependent PL measurements were carried out in order to investigate the temperature-dependent carrier dynamics and the activation energy of CdZnTe/ZnTe QDs on Si substrate.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.6-11
• /
• 2020

The power conversion efficiency (PCE) of a two-terminal tandem solar cell depends upon the tunnel-recombination junction (TRJ) between the top and bottom sub-cells. An optimized TRJ in a tandem cell helps improve its open-circuit voltage (V_oc), short-circuit current density (J_sc), fill factor (FF), and efficiency (PCE). One of the parameters that affect the TRJ is the buffer layer thickness. Therefore, we investigated various TRJs by varying the thickness of the buffer or intermediate layer (TRJ-buffer) in between the highly doped p-type and n-type layers of the TRJ. The TRJ-buffer layer was p-type nc-Si:H, with a doping of 0.06%, an activation energy (E_a) of 43 meV, an optical gap (E_g) of 2.04 eV, and its thickness was varied from 0 nm to 125 nm. The tandem solar cells we investigated were a combination of a heterojunction with intrinsic thin layer (HIT) bottom sub-cell and an a-Si:H (amorphous silicon) top sub-cell. The initial cell efficiency without the TRJ buffer was 7.65% while with an optimized buffer layer, its efficiency improved to 11.74%, i.e., an improvement in efficiency by a factor of 1.53.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.726-733
• /
• 2017

마그네틱 셔터 기어는 원주상에 마주하는 영구자석 레이어간의 자기장을 고조파 모듈레이터를 통해 동기화시켜 동력을 전달하는 장치이다. 이러한 장치는 기계식 감속기에 필적할만한 토크를 발생시키기 위해 과다한 희토류 영구자석이 이용되기 때문에 본 논문에서는 영구자석간의 자기 경로를 변화시켜 영구자석의 양을 기존 마그네틱 기어 대비 50% 수준으로 감소시킨 새로운 방식의 축형 마그네틱 기어를 제안한다. 제안한 시스템의 토크 크기는 공극 자기장의 고조파 분석과 유한 요소 해석을 통해 기존 시스템과 비교된다. 모듈레이터 두께와 개방비가 전달 토크의 크기에 영향을 미치는 주요 설계변수로 고려되어 민감도 해석이 수행되며 고속측과 저속측의 영구자석 극수에 의해 결정되는 기어비에 따른 코깅의 크기가 분석된다. 기계적인 접촉없이 커플링되어 동력을 전달하는 고속측과 저속측 사이의 동적 지배 모델이 유도된다. 2관성 공진계의 동특성을 갖는 유도된 모델을 기초로 하여 선형 제어기를 설계하여 고속측의 계단 입력 위치 제어를 수행하였다.

• 유기물자원화
• /
• 제16권2호
• /
• pp.66-73
• /
• 2008

본 연구에서는 닭, 오리, 말, 염소, 사슴 및 양으로부터 발생되는 분 뇨 및 폐수의 오염물 부하를 조사 및 분석함으로써 축사로부터 발생 및 배출되는 오염물 부하 원단위를 산정하였다. 그 조사 결과는 다음과 같다. 닭의 오염물질 배출량 및 농도분석 원단위를 통하여 산출된 배출부하 원단위는 사육두수 및 사료의 종류, 분의 처리방법의 상이함에 의해 산란계에서 높게 나타난 것으로 판단된다. 배출부하 원단위 중 사슴의 경우 기존의 문헌보다 높게 측정된 것은 사슴의 축종별 체중과 오염물질 발생량의 차이에 의한 것으로 판단된다. 양의 경우 뇨의 발생 부하량 원단위가 분에 비해 2배 정도 높게 측정되었는데 문헌자료에서는 분이 뇨보다 높게 측정되어 현 연구에서의 측정결과와 많은 차이를 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.631-631
• /
• 2013

Battery has major drawbacks including its size and life expectancy, and environmental problem. As an alternative, energy harvesting is emerging as a potential solution to replace battery along with more energy-efficient IT devices. The idea of harnessing energy from our living environment is sustainable, semi-permanent, and eco-friendly. Also, unlike battery, energy harvester does not require much space to store energy. Therefore, energy harvesting can provide a better source of power for small, portable, and wireless devices. Among various ways of harvesting energy from our surroundings, triboelectricity is chosen due to its potential to be miniaturized, and efficient. Triboelectric effect occurs as two different materials with different polarity of charge separation come into contact through friction, and then become separated so that electric potential difference is achieved. In this research, such characteristic of triboelectricity is used as a way to convert ambient mechanical energy into electric energy.Series of recent researches have shown promising results that the triboelectric energy harvester can be simple and cost effective. However, sufficient electricity level required to operate mobile devices has not yet been achieved.In this research, our group focuses on the design and optimization of triboelectric energy harvesting device to enhance its output. By using maskless lithography to pattern Kapton film and silicon substrate, which is used as a mold for PDMS thin layer, and sputtering metal electrodes on each side, we fabricate and demonstrate different designs of triboelectric energy harvester that utilizes the contact electrification between a polymer thin film and a metal thin foil. In order to achieve optimized result, the output voltage and current are measured under diverse conditions, which include different surface structure and pattern, material, and the gap between layers.

• 한국산림과학회지
• /
• 제103권3호
• /
• pp.510-518
• /
• 2014

멧돼지는 농작물 피해, 도심 출몰 등으로 인해 인간과 갈등이 증가하고 있다. 유해야생동물에 대하여 주로 개체수 감소에 대한 노력이 진행되며, 생태적 가치에 대한 연구는 미미하다. 따라서 본 연구는 멧돼지의 비빔목 선택 및 생태학적 역할을 알아보기 위해 2013년 7월부터 10월까지 경남 거창군내 혼효림에서 실시되었다. 멧돼지 비빔목은 리기다소나무(Pinus rigida)가 가장 많이 발견되었으며, 침엽수와 활엽수 모두 해발 200~600 m에서 가장 많이 발견되었다. 흉고직경(DBH)에 있어 비빔목과 대조구 사이 유의한 차이가 나타나지 않았으며, 활엽수보다는 침엽수가 이용강도가 높은 것으로 나타났다. 비빔목 생태학적 특성을 파악하기 위해 반경 2.5 m 이내의 목본식물과 피도량을 대조구와 비교하였다. 총 25과 1,332종의 목본식물이 발견되었다. 각 층별 피도량에서 하층피도량과 중층피도량에서 나무 그룹별 통계적 유의성이 나타났고, 중상층과 상층에서는 나타나지 않았다. 또한 관목과 치수의 수에서 그룹별 유의한 차이가 나타났으며, 교목의 수에서는 나타나지 않았다. 총 개체수, 종수, 종다양도지수(H')에서는 모두 통계적 유의성이 나타났으며, 이용강도가 높은 비빔목에서 가장 높게 나타났다. 따라서 멧돼지는 주로 침엽수를 비빔목으로 선택하며, 이용강도가 높은 비빔목에서는 피도량 등 물리적 환경을 변화시켜 종다양도를 증가시키는 등 여러 가지 긍정적 영향을 끼치는 것으로 나타났다. 멧돼지의 산림생태학적 관리를 위해서는 매년 지속적인 포획보다는 3-4년을 주기로 강도 높은 개체수 감소 후 보전 정책이 필요할 것으로 판단된다.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.88-95
• /
• 2015

The thickness of adsorbed molecular layers is the most critical factor in studying thin-film lubrication, and it is the most essential parameter that distinguishes thin-film from thick-film lubrication analysis. The thin film between the shaft and bearing surface within a very narrow gap was considered. The general Reynolds equation has been derived for calculating thin-film lubrication parameters affecting the performance of the circular journal bearing. Investigation of the load-carrying capacity and pressure distribution for the journal bearing considering the adsorbed layer thickness has been carried out. A Reynolds equation appropriate for the journal bearing is used in this paper for the analysis, and it is discussed using the finite difference method of the central difference scheme. The parameters, such as eccentricity and attitude angle, are used for discussing the load-carrying capacity of the journal bearing. The results reported in this paper should be applied to analysis of the journal bearing with different lubrication factors. The steady-state analysis of the journal bearing is conducted using the Reynolds model under thin-film lubrication conditions. For a journal bearing, several parameters, such as a pressure, load capacity, and pressure components of the bearing can be obtained, and these results can be stored in a sequential data file for later analysis. Finally, their distribution can be displayed and analyzed easily by using the MATLAB GUI technique. The load-carrying capability of the journal bearing is observed for the specified operating conditions. This work could be helpful for the understanding and research of the mechanism of thin-film lubrication.