• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1241-1246
• /
• 2014

일반적으로 감속기, 모터 등과 같은 동력 전달시스템에 의해 발생하는 진동, 소음 등은 취출로봇의 효율성, 내구성, 정밀도와 신뢰성 등을 결정짓게 된다. 본 연구는 유한요소해석을 통하여 취출로봇 구조물의 안전성을 평가하고자 한다. 취출로봇은 사출물을 한 곳에서 다른 곳으로 이송시키는 자동화 로봇이다. 취출로봇 구조는 가로 1300mm, 세로 670.5mm, 높이 670mm 이고, 구조물의 무게는 380kg이다. 자중해석을 통하여 자중과 하중에 의한 변위와 등가응력을 확인하고, 모드해석을 통하여 취출로봇의 고유진동수를 찾는다. 응답해석을 통하여 취출로봇의 고유진동수에 대한 변위와 가속도 응력을 확인하고자 한다. 또한, 취출로봇 구조를 변경해가면서 해석을 반복하여 결과를 확인하고 구조물의 안전성 여부를 판단한다. 이들 해석결과들은 취출로봇의 진동을 저감시키는데 유용하다.

• 대한산업공학회지
• /
• 제25권1호
• /
• pp.21-34
• /
• 1999

We consider a scheduling problem arising in a shipyard subassembly welding process. There are four welding robots of gantry type, which perform the welding process for the subassemblies. Because the robots perform the welding operations at the same time, there is a possibility of collision between adjacent robots depending on the welding schedule. In this paper, we propose a heuristic method to find a welding schedule which does minimize the welding completion time while avoiding collision among the robots. The method consists of two phases: assignment and scheduling. In the assignment phase, we assign each welding line to a proper robot. In the scheduling phase, we determine the welding schedules for the robots so that collision is avoided. Computational experiences with the data which reflect the real situation are reported.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.128-134
• /
• 2019

In shipbuilding, accurate fabrication of curved hull plates is one of the most important steps, since the shape of ship hull, which is very critical in the overall performance of a ship, is a collection of such plates. The curved hull plates forming process requires a significant amount of time by skilled workers in shipbuilding. In general, the workers cause thermal distortion in the plate and forming initial shape using gas heat source. So shipbuilding companies need skilled workers who have long experience. To solve the problem, a lot of researchers tried to develop automation system for curved hull plates. In this paper, we propose automatic heating system with gantry robot, high frequency induction heater to replace the gas heat source and automatic measurement system. We apply the system to forming concave type plate that is actually used in ship manufacturing. In addition, a system was developed to automatically generate heating information, such as the heating location and the heating speed, for actual heating process. Then the system was applied to the actual heating material. It is shown that the proposed triangle heating pattern makes desired concave shape successfully. The induction heating system showed that it can be used for automation system of curved hull plates forming process replacing gas heat source.