• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.59-65
• /
• 2009

Adsorption of an oil-proof agent (OPA）onto cellulose fibers during the papermaking process was investigated using UV-Vis spectrophotometry by measuring the OPA concentration decrease in the solution. From the calibration curve, the spectrum were converted to chemical concentrations in solution, from which the amount adsorbed onto the fiber surface could be determined. Thus, it was possible to determine the total amount adsorbed onto the fibers and in solution. Using this approach, we studied the adsorption behavior of the OPA onto the fiber surface and derived its, ${\Gamma}^s_t={\Gamma}^s_{\infty}(1-e^{-k_{\alpha}t})$. The values of the parameters kaand ${\Gamma}^s_{\infty}$ were determined using a mathematic model based on a mass transfer equation. Ultimately, a complete was derived: $Q={\alpha}{\cdot}\sum\limits_{i-1}^m{\pi}d_il_i{\cdot}M_A{\cdot}(1-e^{-k_{\alpha}t})/A_N$.

• Journal of Biomedical Engineering Research
• /
• v.39 no.4
• /
• pp.161-167
• /
• 2018

Polyvinyl alcohol/sodium carboxymethyl cellulose (PVA/NaCMC) hydrogels were prepared by physical crosslinking (cyclic freezing/thawing) and gamma (${\gamma}$)-ray irradiation to evaluate the effect of NaCMC concentration (2~8 wt%) on the mechanical properties and the biocompatibility of the PVA/NaCMC hydrogels. The swelling rate of PVA/NaCMC hydrogels regardless of irradiation rose with increasing NaCMC content from 2 wt% to 8 wt%, while the gelation rate was the reverse. As the NaCMC content increased from 2 wt% to 6 wt%, the compressive strength of the hydrogels increased dramatically from $8.5{\pm}2.0kPa$ to $52.7{\pm}2.5kPa$ before irradiation and from $13.5{\pm}2.9kPa$ to $65.5{\pm}8.7kPa$ after irradiation. When 8 wt% NaCMC was added afterwards, the compressive strength decreased however. The irradiated PVA/NaCMC hydrogels containing 6 wt% NaCMC exhibited the tailored properties of the swelling rate of $118{\pm}3.7%$, the gelation rate of $71.4{\pm}1.3%$, the strength of $65.5{\pm}8.7kPa$, respectively, and no cytotoxicity was observed.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.353-357
• /
• 2010

Silver nanoparticles (AgNPs) can be used in the areas such as integrate circuit, cell electrode and antimicrobial deodorant. In this study, AgNPs have been prepared by using $AgNO_3$ aqueous solution in the carboxymethyl cellulose (CMC) hydrogel. CMC powders were dissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGy to make CMC hydrogel. CMC hydrogels were dipped into $1.0{\times}10^{-2}M$ $AgNO_3$ solution for 1 hour. After that, the swollen hydrogels were irradiated by gamma-ray for the formation of AgNPs. The characteristics of silver nanoparticles in the CMC hydrogels were monitored by UV-Vis and the morphological study and dispersed coefficient of particles were investigated by FE-SEM/EDX. It was observed that the sodium salt in the CMC is crucial to the formation of silver nanoparticle. Finally, antibacterial tests indiacted that the hydrogel containing silver nanoparticle has antibacterial activity.

• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.159-164
• /
• 2012

Bacterial cellulose (BC) is generated from citrus gel by Gluconacetobacter hansenii TL-2C. BC has good properties such as high-burst pressure, high-water contact and the ultrafine highly nanofibrous structure of mimic natural extracellular matrix (ECM) for tissue engineering. In this study, acrylic acid (AAc) was grafted onto BC surfaces under aqueous conditions using gamma-ray irradiation, and then immobilized gelatin onto AAc-g-BC. The characterization of scaffolds was performed by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), toluidine blue O (TBO) assay. Morphology of gelatin and AAc incorporation onto BC nanofibers did not changed. Our study suggests that gelatin-immobilized BC nanofibers scaffold has a potentiality to fabricate 3D nanofibrous scaffolds for tissue engineering.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.79-86
• /
• 1990

Cyclodextrin hydrolase from Bacillus stearothermophilus KFCC 21203 was purified and the properties of the purified enzyme were investigated. The enzyme was purified 15 folds with 77 % recovery by ammonium sulfate fractionation, DEAE-cellulose chromatography, and Ultro AcA 34 gel filtration. The specific activity and the molecular weight of the enzyme were 1.30 units/mg protein and about 29,500, respectively, The maximum activity of the enzyme was shown at $55^{\circ}C$ and pH 5.5. However, stable temperature and pH were $40^{\circ}C$ and $5.0{\sim}8.0$, respectively. The Km value for ${\gamma}-cyclodextrin$ was $3.78{\times}10^{-3}$ M. The degradation activity of the enzyme was selectively high for ${\gamma}-cyclodextrin$, and very low for ${\beta}-cyclodextrin$, but not for ${\alpha}-cyclodextrin$. The decomposed products of ${\gamma}-cyclodextrin$ were mainly glucose and maltose, and a little mlatotriose. The activity of the enzyme was very high for amylose, potato starch, corn starch, amylopectin and maltooligomer, and relatively high for glycogen and dextrin. The decomposed products of them were mainly glucose and maltose.

• Clean Technology
• /
• v.16 no.1
• /
• pp.19-25
• /
• 2010

In this work, the conversion of crystalline cellulose into polyols in the presence of hydrogen was examined over noble metal (Pt, Ru, Ir, Rh, and Pd) catalysts supported on activated carbon. For comparison, Pt/${\gamma}-Al_2O_3$ and Pt/H-mordenite were also investigated. Several techniques: $N_2$ physisorption, X-ray diffraction(XRD), inductively-coupled plasma-atomic emission spectroscopy (ICP-AES), temperature-programmed reduction with $H_2$ ($H_2$-TPR) and CO chemisorption were employed to characterize the catalysts. The cellulose conversion was not strongly dependent on the types of the catalyst used. Pt/AC showed the highest yields to polyols among activated carbon-supported noble metal catalysts, viz. Pt/AC, Ru/AC, Ir/AC, Rh/AC and Pd/AC.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.497-503
• /
• 1998

Cyclodextrinase from B. stearothemophilus KJ16 that can produce both cyclodextrin(CD) glucanotransferase and cyclodextrinase was purified 87.6-fold with 7% yield by ammonium sulfate precipitation, DEAE-cellulose chromatog-raphy, Sephadex G-100 chromatography, and FPLC. The molecular weight of the purified enzyme was about 68,000 dalton by SDS-PAGE. The optimal pH and temperature were 6.0 and 55$^{\circ}C$, respectively. The enzyme was stable at 5$0^{\circ}C$ for 2 hr in the pH range of 5.5 and 8.5. The enzyme activity was inhibited strongly by mercaptoethanol, di-thiothreitol, p-chloromercuribenzoate, N-bromosuccinimide, $Cu^{+2}$and $Hg^{+2}$. The purified enzyme hydrolyzed CDs with$\gamma$-CD>$\beta$-CD>$\alpha$-CD. The enzyme also hydrolyzed linear maltodextrins and polysaccharides, but the rates of hyd-rolysis for such substrates were slow as compared to that for $\gamma$-CD. The final degradation products with all substrates were maltose and glucose. Maltose was not further hydrolyzed.

• Nuclear Engineering and Technology
• /
• v.11 no.2
• /
• pp.105-110
• /
• 1979

In order to evaluate the effect of gamma ray irradiation to the soils added with several organic matters on release sad fixation of $^{65}Zn$, a soil incubation test was carried out by use of an acidic and a calcareous soil. The results obtained were summarized as follows : DTPA extractable $^{65}Zn$ decreased gradually with elapsed time of incubation owing to fixation of $^{65}$Zn by the soils but after four weeks DTPA extractable $^{65}Zn$ was reached an equilibrium state. The most parts of $^{65}Zn$ activity in the equilibrium state was found in the solid phase. The extent of zinc fixation in acidic Keumgok and calcareous Jecheon soils represented as activity basis was 89 and 93.7 per cent of applied $^{65}Zn$ respectively. Increased tendency of DTPA extractable zinc was shown by irradiating gamma ray to both soils because of $^{65}Zn$ fixation could be decreased by irradiation. The extractability of fixed $^{65}Zn$ by DTPA solution was 38.9 per cent in acidic Keumgok soil and only 9.5 per cent in calcareous Jecheon soil. Release of fixed $^{65}Zn$ by irradiation of gamma ray is closely related to pH of both soils. Much more $^{65}Zn$ could be released under low pH condition. Effect of gamma ray irradiation to organic matter sources on release of $^{65}Zn$ could not be differentiated. But in the case of nonirradiated soils, however, glucose treated soils couldrelease much more the extractable zinc as compared to those of the straw or cellulose treatment.

• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.249-252
• /
• 2011

Lignin is one of the natural macromolecules. Every year large amount of lignin arises from the cellulose production as a by-product worldwide. The use of lignin as a precursor to carbonaceous materials has gained interest due to its low cost and high availability. Therefore, we improved the properties of alkali-lignin by exposing to gamma ray in this study. The alkali-lignin is irradiated by Gamma ray irradiation with varying doses. The char yields of alkali-lignin were investigated by increasing up to 50 kGy. The cross-linking and bond scission of alkali-lignin occur simultaneously during gamma ray irradiation. The crosslinking was predominantly accelerated by gamma ray irradiation up to 50 kGy. Bond scission predominantly occurs between 50 and 500 kGy. ESCA analysis indicated that the alcoholic carbon increase up to 50 kGy. Solution viscosity was increased as absorbed dose increased up to 20 kGy. In addition, the aromatic ring was not influenced by irradiation at doses ranging from 20 to 500 kGy as shown in FT-IR results.

• KSBB Journal
• /
• v.9 no.5
• /
• pp.499-505
• /
• 1994

Bacillus macerans cyclodextrin glucanotransferase(EC 2.4.1.19: 1, 4-${\alpha}$-D(1, 4-${\alpha}$-glucano)-transferase, CGTase) was purified by the technique of starch adsorption and DEAE-cellulose column chromatography. The molecular weight of the enzyme was 67,000, consisting of a subunit. The enzyme converted starch into ${\alpha}$-, ${\beta}$-, and ${\gamma}$-CD in the relative amounts of 1:1.68:0.32, respectively. In the early reaction period, maltohexose was formed mainly by the coupling reaction of ${\alpha}$-CD with D-glucose and then other oligosaccharides. Maltotetrose was formed mainly from ${\alpha}$-CD in the initial stage of hydrolysis of the enzyme and then small amount of other oligosaccharides. Maltotriose was a good substrate for the enzyme and maltosyl or D-glucopyranosyl group can be transfered from this sugar. In this work, D-glutosyl transfer was premiered.