• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.392-402
• /
• 2019

This study interpreted the characteristics of the site and provenance of raw material by performing material characteristics analysis of the slags and tuyeres excavated from the Sinpung site in Wanju, Jeollabuk-do. The major chemical compositions suggested that the slags and tuyeres were created when Cu-Sn-Pb was alloyed. Metal microscope and scanning electron microscopy-energy dispersive spectrometer analyses revealed that the slags and tuyeres were by-products formed in the alloying process. This alloy, created by adding galena to copper and tin ingots, was an intermediary material used in making the finished products. According to the lead isotope ratio analysis result, slags could be made using galena of the southern Zone III region of Korea. Based on the decomposition of mica group minerals and the formation of mullite detected through X-ray diffraction analysis, it is possible to conclude that the tuyeres operated at approximately 1,000℃ as, the mullite was detected on the outside of the tuyeres.

• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.287-307
• /
• 1988

The Cheongju gold-silver mine is located at approximately $36^{\circ}28^{\prime}$north latitude and $127^{\circ}31^{\prime}$ east longitude in the Cheongju City of the Chung cheong bug Do, South Korea. Gold-Silver bearing hydrothermal quartz veins, occur in Cheongju Granit of Jurassic age. K-Ar isotope data for sericite in quartz vein indicate that the Au-Ag mineralization took place in early Cretaceous ($97.5{\pm}2.18$ MA. Park, et ai, 1986). Three stage of mineralization recognized anre, from early to later, (I) Sulide stage: pyrite, arsenopyrite, pyrrhotite (Hpo), sphalerite, chalcopyrite, electrum and quartz (II) Electrum stage: pyrite, sphalerite, galena, chalcopyrite, electrum and quartz. (III) Silver mineral stage: pyrite, marcasite, pyrrhotite (Mpo), sphalerite, galena, electrum, native silver argentite, fluorite, calcite and quartz. In this paper, mode of occurrences and chemical compositions of electum and native silver have been investigated by means of microscope and EPMA. Electron probe microanalysis shows that an individual grain of electrum is almost homogeneous in composition. Silver content of electrum ranges from 44.7-67.1 atom.%. Gold content of native silver ranges below 0.2 atom. %. Vicker's hardness number (VHN) of electrum and native silver ranges $78.2-81.8kg/mm^{2}$ respectively. The filling temperature of fluid inclusions in quartz ranges from $130-280^{\circ}C$. On the basis of arsenpyrite geothemometer, the equilibrium temperature and sulfur fugacity of the pyrite-arsenopyrite-pyrrhotite(Hpo) assemblage is assumed to be in ange from $300-310^{\circ}C$ and $10^{-10}$ to $10^{-11}$ atm. The estimated ore reserviors on Cheongju mine area are calculated to 8000 T/M, averaing 8.6g/t Au, 27.8 g/t Ag, 1.25% Pb, l.65% Zn.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.209-216
• /
• 2019

Lead isotope ratios in horse-shaped bronze buckles excavated from the Songjeol-dong site in Cheongju and the mid-western region of the Korean Peninsula have been determined by thermal ionization mass spectrometry. The lead isotope ratios of the samples with data provenance were plotted in zone 3 of the South Korean galena map. The results indicated that the horse-shaped bronze buckles could be made using galena located in the same area as the archaeological site. These results can be used as basic data for comparison purposes in future studies on the manufacturing technology and provenance of bronze artifacts.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.125-139
• /
• 2010

Behavior of heavy metals and arsenic in the tailings of Songcheon Au-Ag mine was characterized via both mineralogical and geochemical methods. Mineral composition of the tailings was investigated by X-ray diffractometry, energy-dispersive spectroscopy, and electron probe micro-analyzer (EPMA) and total concentrations of heavy metals and arsenic and their chemical forms were analyzed by total digestion of aqua regia and sequential extraction method, respectively. The results of mineralogical study indicate that the tailings included mineral particles of resinous shape mainly consisting of galena, sphalerite, pyrite, quartz, and scorodite, and specifically socordite was identified in the form of matrix. EPMA quantitative analyses were performed to evaluate the weatherability of each mineral, and the results suggest that it decreased in the sequence of arsenopyrite > galena > sphalerite > pyrite. The weathering pattern of galena was observed to show distinctive zonal structure consisting of secondary minerals such as anglesite and beudantite. In addition, almost all of arsenopyrite has been altered to scorodite existing asmatrix and galena, sphalerite, and pyrite which have lower weatherability than arsenopyrite were identified within the matrix of scorodite. During the process of alteration of arsenopyrite into scorodite, it is likely that a portion of arsenic was lixiviated and caused a great deal of detrimental effects to surrounding environment. The results of EPMA quantitative analyses verify that the stability of scorodite was relatively high and this stable scorodite has restrained the weathering of other primary minerals within tailings as a result of its coating of mineral surfaces. For this reason, Songcheon tailings show the characteristics of the first weathering stage, although they have been exposed to the surface environment for a long time. Based on the overall results of mineralogical and geochemical studies undertaken in this research, if the tailings are kept to be exposed to the surface environment and the weathering process is continuous, not only hazardous heavy metals, such as lead and arsenic seem to be significantly leached out because their larger portions are being partitioned in weakly-bound (highly-mobile) fractions, but the potential of arsenic leaching is likely to be high as the stability of scorodite is gradually decreased. Consequently, it is speculated that the environmental hazard of Songcheon mine is significantly high.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.377-380
• /
• 2006

The semiconductor PbS nanobelts (width 50-120 nm and length over 3 $\mu$m) were self-assembled in a simple reverse micelle solvent system containig the surfactant of polyoxyethylene (9) dodecy ether $(C_{12}E_9)$. The nanobelts synthesized were found to possess cube galena poly-crystal structure with high purity when analyzed by ED and X-ray diffraction. Significant “blue shift” from bulk material was observed on the PbS nanobelts using photoluminescence and UV-Vis spectroscopy. A mechanism involving the possible formation of nanobelts based on surfactant template was also proposed.

• Economic and Environmental Geology
• /
• v.2 no.3
• /
• pp.47-57
• /
• 1969

The Yeonhwa Lead and Zinc Mine is located in northern part of Kyeongsang-Buk-Do, Korea, and is economically most important mine because it produces most part of the output of lead and zinc minerals in the country. Ore deposits of the mine are localized in the Pungchon Formation and several limestone seams of upper Myobong Formation in Cambrian Age. Ore solution ascended along the fractures of N-S, NE-SW or NW-SE trends and along slate and limestone boundary, and then replaced selectively limestone to make ore bodies. Skarn minerals are consisted of hedenbergite, diopside, and main sulfide mineral orebodies are composed of galena, zincblende, pyrrhotite, pyrite and a minor amounts of arsenopyrite and chalcopyrite. Metal ratio, ${\rho}_{Pb}={\frac{Pb(%)}{Pb(%)+Zn(%)}}{\times}100$, illustrates the zona I arrangements of some ore bodies. It will be inferred the flow trending of ore solution and the process reaction with adjacent country rocks. The sub-divided formations of the Pungchon limestone and Myobong slate are very useful as a criteria for detecting probable ore location. Rhodochrosite veins are good evidence for searching of ore location, especially on Pb-rich ore bodies.

• Economic and Environmental Geology
• /
• v.16 no.3
• /
• pp.135-147
• /
• 1983

The copper deposits in Goseong district, Gyeongnam area are fissure filled copper veins emplaced on Cretaceous Goseong formation and andesitic rocks. Occurrence of ore veins and mineral paragenesis suggest a division of the hydrothermal mineralization into three stages: stage 1, deposition of arsenopyrite, pyrite, quartz, chlorite and epidote; stageII, deposition of pyrite, chalcopyrite, galena, sphalerite, electrum, pyrargyrite, tetrahedrite, silver sulfosalt minerals, quartz, chlorite, sericite and miner amount of calcite; stage III, formation of barren calcite veins. Filling temperature of fluid inclusions in quartz of stage II, range from 260 to 360 C and salinities from 6.2 to 13.6 weight percent NaCi equivalent.

• Economic and Environmental Geology
• /
• v.19 no.1
• /
• pp.57-66
• /
• 1986

The ore deposit of the Ohtani mine is one of representatives of plutonic tungsten-tin veins related genetically to acidic magmatism of Late Cretaceous in the Inner zone of Southwest Japan. Based on macrostructures of vein filling, three major mineralization stages are distinguished by major tectonic breaks. The constituents of ore minerals are scheelite, cassiterite, chalcopyrite, pyrrhotite, sphalerite, with small amounts of cubanite, stannite, galena, native bismuth, bismuthinite, arsenopyrite and pyrite. The relationship between the polymorphic variations of pyrrhotite and the kinds of the associated characteristic of ore mineral, in relation with hypogene mineralization, has been demonstrated. Pyrrhotite of stage I is predominantly of the hexagonal phase (Hpo>Mpo). Pyrrhotite of stage II is mainly of the monoclinic phase ($Hpo{\ll}Mpo$). Pyrrhotite of stage III is a single monoclinic phase ($Hpo{\ll}Mpo$). The compositions of the hexagonal pyrrhotite decrease in Fe content ranging from 47.44 atom % Fe in stage I to 46.88 atom % Fe in stage III.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.213-221
• /
• 1987

The Donghae mine locates at Jangjoari, Koseongun, Kyongsang-nam-do. The geology of the mine consists of the upper part of Chin dong Formation conformably overlain by tuffaceous Koseong Formation. These formations are intruded by the granodiorite and the basic dikes. The ore mineralization occurs in the fault breccia pipe at the center of a granodiorite stock. The estimated dimension of the breccia pipe is $7m{\times}70m{\times}200m$. The host rock has distinctive hydrothermal alteration halos consisting hematite zone, chlorite zone, epidote zone and sericite zone from outer zone to the ore vein. The ore mineralization occurred in the three distinctive stages. The ore minerals formed in the first stage are pyrite, sphalerite, chalcopyrite, stannite and tetrahedrite. Galena and arsenopyrite are formed in the second stage. Some sphalerite grains include exsolution dots of the chalcopyrite. It is suggested that the ore mineralization occurred by a boiling of a hydrothermal fluid during its initial stage and subsequent cooling and $CO_2$ fugacity drop of remaining hydrothermal fluid by a ground water mixing aided vertical zoning of the ore minerals.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.231-236
• /
• 2007

Electrical resistivity, self-potential and time-domain induced polarization methods were conducted for study of electrical responses on vein-type sulfides ore, which is intruding limestone and dolomite of Ordovician, of Geumpung mine located in Dojeon-ri, Susan-myeon, Jecheon-si, Chungbuk. Sulfides bearing chalcopyrite, pyrrhotite and galena etc. are deposited in disseminated or vein-type. Good result that resistivity and self-potential surveys detect high grade-estimated mineralized zone located in upper part of existing low grade ore zone is acquisited and is to some extent consistent with induced polarization. Furthmore, a new mineralization zone directing EW is detected.