• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.105.1-105
• /
• 2002

$\textbullet$ This paper deals with obstacle avoidance of a quadruped robot with a vision system and a PSD sensor. $\textbullet$ The vision system needs for obstacle recognition toward robot. $\textbullet$ Ths PSD sensor is also important element for obstacle recognition. $\textbullet$ We propose algorithm that recognizes obstacles with one vision and PSD sensor. $\textbullet$ We also propose obstacle avoidance algorithm with map from obstacle recognition algorithm. $\textbullet$ Using these algorithm, Quadruped robot can generate gait trajectory. $\textbullet$ Therefore, robot can avoid obstacls, and can move to target point.

• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.1029-1036
• /
• 2011

An energy-efficient reference walking trajectory generation algorithm is suggested utilizing allowable ZMP (Zero-Moment-Point) region, which maxmizes the energy efficiency for cyclic gaits, based on three-dimensional LIPM (Linear Inverted Pendulum Model) for biped robots. As observed in natural human walking, variable ZMP manipulation is suggested, in which ZMP moves within the allowable region to reduce the joint stress (i.e., rapid acceleration and deceleration of body), and hence to reduce the consumed energy. In addition, opimization of footstep planning is conducted to decide the optimal step-length and body height for a given forward mean velocity to minimize a suitable energy performance - amount of energy required to carry a unit weight a unit distance. In this planning, in order to ensure physically realizable walking trajectory, we also considered geometrical constraints, ZMP stability condition, friction constraint, and yawing moment constraint. Simulations are performed with a 12-DOF 3D biped robot model to verify the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.536-539
• /
• 1997

This paper presents a three dimensional modeling and a trajectory generation for minimized impact walking of the biped robot. Inverse dynamic analysis and forward dynamic analysis are performed considering impact force between the foot and ground for determining the actuator capacity and for simulating the proposed biped walking robot. Double support phase walking is considered for close to human's with adding the kinematic constraints on the one of the single support phase.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.57-62
• /
• 2009

Kinematic analysis of MTC (Muscle-Tendon Complex) units is a key indicator for diagnosis of patients with musculoskeletal disorders because the contracture or shortening of musculo-tendinous units is known to produce pathological gaits. Therefore, the principal objective of this study was to assess the length change in the triceps surae prior to and after wearing an AFO (Ankle-Foot Orthoses) in patients with musculoskeletal disorders during a gait. In this study, analyses were conducted using a Muscle Tendon Complex model coupled with the trajectory data from markers attached to anatomical landmarks. As a result, the maximum length change in the triceps surae during a gait was 4.87% when a barefoot walking group and a walking group with AFO were compared. In particular, the difference in length changes between both groups in Soleus MTC units was found to be statistically significant in all gait phases. Our results revealed that MTC length in the AFO walking group was clearly increased over that of the barefoot walking group. In the future, further studies will be required in order to more adequately assess musculoskeletal disorders using many cases studies with regard to agricultural working conditions because this study deals with the kinematic analysis of musculo-tendinous units in the case of clinical experiments.

• 한국전문물리치료학회지
• /
• 제15권4호
• /
• pp.27-33
• /
• 2008

The purpose of this study was to investigate the changes of the center of pressure (COP) trajectory in healthy elderly subjects while crossing an obstacle before and after participation in Tai Chi training. Forty healthy elderly subjects participated either in a 12-week intervention of Tai Chi training or in a health education program. The participants were divided into two groups (the experimental group and the control group). Subsequently, the participants were pre- and post-tested on crossing over an obstacle from a quiet stance. Participants in the experimental group received Tai Chi training that emphasized the smooth integration of trunk rotation, a shift in weight bearing from bilateral to unilateral support and coordination and a gradual narrowing of the lower-extremity stance three times weekly. The participants in the control group attended a health education program one hour weekly and heard lectures about general information to promote health. Performance was assessed by recording the changes in the displacement of the COP in the anteroposterior (A-P) and mediolateral (M-L) directions using a force platform. Participants in the Tai Chi group significantly increased the A-P and M-L displacement of the COP after Tai Chi training (p<.05). No significant differences in the A-P and the M-L displacement of the COP between pre-testing and post-testing in the control group were found. This study has shown that participation in Tai Chi exercise increased the magnitude of the A-P and M-L displacement of the COP, thereby improving the ability of healthy elderly participation to generate momentum to initiate gait. These findings support the use of Tai Chi training as an effective fall-prevention program for the elderly.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.213-221
• /
• 2005

An insole type local shear force measurement system was developed and local shear stresses in the foot were measured during level walking. The shear force transducer based on the magneto-resistive principle, was a rigid 3-layer circular disc. Sensor calibrations with a specially designed calibration device showed that it provided relatively linear sensor outputs. Shear transducers were mounted on the locations of four metatarsal heads and heel in the insole. Sensor outputs were amplified, decorded in the bluetooth transmission part and then transferred to PC. In order to evaluate the developed system, both shear and plantar pressure measurements, synchronized with the three-dimensional motion analysis system, were performed on twelve young healthy male subjects, walking at their comfortable speeds. The maximum peak pressure during gait was 5.00kPa/B.W at the heel. The time when large local shear stresses were acted correlated well with the time of fast COP movements. The anteroposterior shear was dominant near the COP trajectory, but the mediolateral shear was noted away from the COP trajectory. The vector sum of shear stresses revealed a strong correlation with COP movement velocity. The present study will be helpful to select the material and to design of foot orthoses and orthopedic shoes for diabetic neuropathy or Hansen disease.

• 한국정보전자통신기술학회논문지
• /
• 제12권2호
• /
• pp.170-177
• /
• 2019

본 논문에서는 4족복 보행 로봇의 주행 안정성을 개선하기 위한 3가지 이론을 제시한다. 첫 번째는 Minimum-Jerk Trajectory를 이용하여 다리궤적을 최적화 시킨다. 두 번째는 본 논문에서 새롭게 제시한 사인파와 기존의 방식인 LSM을 Jerk값에 근거하여 비교한다. 셋째는 ADAMS-MATLAB co-simulation을 이용하여 반복적인 로봇 시뮬레이션을 통해 스웨이의 최적 보폭을 계산한다. 위의 과정을 통해 로봇의 보행 개선점을 기존의 이론과 비교하여 나타내었다. 첫 번째로 정 보행시 몸체와 타원형태의 다리 끝의 움직임에 Minimum-Jerk trajectory를 사용하여 다리궤적이 급격하게 변하는 지점의 평균 기울기를 최소 1.2에서 최대 2.9까지 감소시켜 지면에 다리 끝점이 도달할 때 충격을 최소화하여 안정성을 증가 하였다. 두 번째로 기존 LSM(Longitudinal Stability Margin)기법과 본 논문에서 제시한 사인파형 Sway를 사용하여 비교한 결과 평균 Jerk를 Z축에서 0.019, X축에서 0.457, Y축에서 0.02, 3D는 0.479 만큼 감소 시켰다. 특히 X축 Jerk는 크게 감소 하였다. 셋째로 로봇이 최소 Jerk 값으로 보행하기 위한 최적의 보폭의 길이를 상기 분석을 통해 도출하였으며 그 결과 20cm보폭 길이가 가장 안정적이었다.

• The Journal of Korean Physical Therapy
• /
• 제22권3호
• /
• pp.49-53
• /
• 2010

Purpose: The purpose of this study was to investigate the plantar pressure distribution between the affected and unaffected side in adult hemiplegia during gait with the use of a quad-cane. Methods: Thirty-four stroke patients from 34 to 83 years of age were enrolled in this study, and in random order, all patients were asked to walk at their most comfortable speed three times along a walkway with the use of quad-cane over a period of three days. Plantar pressure distribution was measured with regard to foot contact pattern and center of pressure (CoP) trajectories during the stance phase, progressing from heel-strike to toe-off. The F-scan system was used to compare the foot pressure of the affected and unaffected sides. Results: A significant reduction in the total contact area, the width of fore foot (FF) and hind foot (HF), and anterior/posterior (AP) CoP trajectory of the affected side was found. However, contact pressure of the hind foot on the affected side during walking increased when compared to that on the unaffected side. Conclusion: We demonstrated that plantar pressure distribution on the affected side of adult hemiplegia patients was generally poorer than that on the unaffected side when these patients walked with cane assistance. However, the use of a quad-cane was shown to increase contact pressure of the hind foot on the affected side because weight can be borne on the affected side during heel-strike with use of the cane.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3092-3094
• /
• 1999

This paper deals with the gait generation of Biped Walking Robot (IWR-III) to have a continuous walking pattern like human. For this, trajectory planning with the consideration of kick action is done in each walking step, and the coordinate transformation is done for simplifying the kinematics. The trunk moves continuously for all walking time and moves toward Z-axis. Balancing motion is acquired by FDM(Finite Difference Method) during the walking. By combining 4-types of pre-defined steps, multi-step walking is done. Using numerical simulator, dynamic analysis and system stability is confirmed. Walking motion is visualized by 3D-Graphic simulator. As a result, the motion of balancing joints can be reduced by the trunk ahead effect during kick action, and impactless smooth walking is implemented by the experiment.

• 한국지능시스템학회논문지
• /
• 제19권6호
• /
• pp.749-754
• /
• 2009

4족 보행로봇의 빠른 걸음새를 자동으로 생성하는 문제에 대해서 GP(Genetic Programming)와 CPG(Central Pattern Generator) 기반의 두 가지 방식을 비교한다. GP(Genetic Programming)를 이용한 관절좌표계 상에서의 걸음새 생성 기법은 발끝의 자취와 수 많은 자세 파라미터를 사용하는 대신에 적은수의 관절 궤적을 생성하므로 효율적이다. CPG는 뇌로부터의 입력을 받아서 진동적인 출력을 생성하는 신경회로로 고등생물의 걸음 원리를 수학적으로 모델링한 것이다. 바이올로이드로 구성된 4족 보행로봇에 대하여 Webots기반의 ODE 시뮬레이션을 통해 접근 기법들에 대한 최적화를 수행하고 결과를 비교 분석한다. 그리고, 구해진 시뮬레이션과 결과를 실제 로봇에 대해서 각 동작을 실행시켜 보면서 CPG와 GP 기반의 걸음새 방식의 실제적인 성능 및 특성을 고찰한다.