• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.41-51
• /
• 1992

In this thesis, both soap and enzymatic degumming method were adopted and the optimum degumming conditions were obtained. Difference between the two degumming methods in silk fiber state was investigated and analyzed on the basis of the results of physical testings, polarizing microscopy, scanning electron microscopy, viscosity measurement, (${\alpha}$＋$\varepsilon$) amino group contents measurement, birefringence measurement, amino acid analysis, thermal analysis, infrared spectroscopy and x-ray diffraction analysis. The results obtained were summarized as follows; Physical test results of the degummed silk fiber showed that the tenacity and the elongation of enzymatic degummed silk fiber were lower than those of soap degummed fiber. But SEM observation and amino acid analysis showed almost the same tendency in the two degumming methods. The viscosity of enzymatic degummed silk fiber was lower than that of soap degummed fiber, but (${\alpha}$＋$\varepsilon$) amino group contents was higher in the enzymatic degummed fiber. It can be suggested that the enzymatic degummed silk fibroin was more degraded than the soap degummed fibroin. The birefringence, endothermic temperature of DSC spectrum, IR crystallinity and X-ray lateral order factor of enzymatic degummed silk fiber were higher than those of soap degummed fiber. It seems that the enzymatic degummed silk fiber has the higher crystallinity than that of soap degummed one according to the above results. However, it can be inferred that these differences between soap and enzymatic degummed fiber would be lessened if pretreatment and aftertreatment were included in the enzymatic degumming process.

• Carbon letters
• /
• v.9 no.3
• /
• pp.188-194
• /
• 2008

Porous carbon materials synthesized from various plant derived precursors i.e. seeds of [Castor (Ricinus communis), Soap nut (Sapindus sp.), Cashew-nut (Semecarpus anacardium), Jack fruit (Artocarpus heterophyllus), Safflower (Carthamus tinctorius), Ambadi (Crotolaria juncea), Neem (Azadirachta indica), Bitter Almond (Prunus amygdalus), Sesamum (Sisamum indicum), Date-palm (Phoenix dactylifera),Canola (Brassica napus), Sunflower (Helianthus annulus)] and fibrous materials from [Corn stem- (Zea mays), Rice straw (Oryza sativa), Bamboo (Bombax bambusa) and Coconut fibers (Cocos nucifera)] were screened to make supercapacitor in 5M KOH solution. Carbon material obtained from Jack fruit seeds (92.0 F/g), Rice straw (83.0 F/g), Soap nut seeds (54.0 F/g), Castor seeds (44.34 F/g) and Bamboo (40.0 F/g) gave high capacitance value as compared to others. The magnitude of capacitance value was found to be inversely proportional to the scan rate of measurement. It is suggested that carbon material should possess large surface area and small pore size to get better value of capacitor. Moreover, the structure of carbon materials should be such that majority of pores are in the plane parallel to the plane of electrode and surface is fluffy like cotton ball.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.213-223
• /
• 2023

A total of 81 handmade soaps on sale on the market were collected from January to November 2022. To compare quality characteristics, all ingredients were referred to, and the pH, dry reduction, heavy metals (lead, arsenic, cadmium, antimony, and mercury), and contents of free alkali were measured. All soaps had a slightly alkaline pH of 7.9 to 11.2, average drying loss was 17.6%, and free alkali was hardly detected. The average values of all heavy metals were 0.104 ㎍/g for lead, 0.035 ㎍/g for arsenic, 0.002 ㎍/g for cadmium, 0.048 ㎍/g for antimony, and 0.0003 ㎍/g for mercury. The results of handmade soap were below the recommended in regulations on safety standards for cosmetics of Ministry of Food and Drug Safety.

• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.111-122
• /
• 1997

This thesis researched for the conservation of a suit of armor, one glove, one belt, and on knife case that General Jung, Gong-chung had been worn in the early 17 th centuries. The armor was Doojung-kab for the battle. It was made of two kinds of fabrics, one of them was silk satin's outer fabrics, the other was quilt4d cotton's lining. as the armor was made of silk and cotton, it was treated by dry solvents and dry soap. In the dry cleaning method, used solvents were n-hexane, cyclohexane, benzene, and n-decane. the volume ratio of dry soap was 120: 1. The reaction temperature was 30℃, and reaction time was 10 to 30 minutes per one turn. The glove, belt and knife case were made with leather. They were dipped on the polyethyleneglycol 150 saturated solution during 24hours at 50℃ and then dried naturally. They were washed by toluene to remove the untreated pp.E.G. on the surfaces. It was sterilized by two gases of methylenebromide and ethyleneoxied. For the conservation, it was packed thoroughly by ？ polyethylene film sheet without air.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.70-74
• /
• 2006

In this paper, We propose the real-time monitor and control mechanism based-on web service for intelligent robot called URC(Ubiquitous Robotic Companion). URC is intelligent robot designed to interact with external digital device that can communicate through wire or wireless. In this paper, we designed the result of this study into the target robot called NETTORO and proved its practical worth. we optimized web-service technology in Embedded system environment so that can monitor and control indoors in remote place through acquired information from various sensors / actuators and then we designed. Also, we described command port to WSDL, so that can apply variously such as web server or application program in AXIS engine through gSOAP transmission protocol.

• Carbon letters
• /
• v.8 no.4
• /
• pp.285-291
• /
• 2007

Carbon materials of various morphologies were synthesized by pyrolysis of Soap-nut seeds (Sapindus mukorossi), Jack Fruit seeds (Artocarpus heterophyllus), Date-seeds (Phoenix dactylifera), Neem seeds (Azadirachta indica), Tea leaves (Ehretia microphylla), Bamboo stem (Bambusa bambus) and Coconut fiber (Cocos nucifera), without using any catalyst. Carbon materials thus formed were characterized by SEM XRD and Raman. Carbon thus synthesized varied in size (in ${\mu}m$) but all showed highly porous morphology. These carbon materials were utilized as the anode in Lithium secondary battery. Amongst the various precursors, carbon fibers obtained from Soap-nut seeds (Sapindus mukorossi) and Bamboo stem (Bambusa bambus), even after $100^{th}$ cycles, showed the highest capacity of 130.29 mAh/g and 92.74 mAh/g respectively. Morphology, surface areas and porosity of carbon materials obtained from these precursors were analyzed to provide interpretation for their capacity to intercalate lithium. From the Raman studies it is concluded that graphitic nature of carbon materials assist in the intercalation of lithium. Size of cavity (or pore size of channels type structure) present in carbon materials were found to facilitate the intercalation of lithium.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.284-290
• /
• 1993

The soap-free emulsion polymerization was carried out for Styrene/Butadiene system with Acrylonitrile as hydrophilic comonomer and KPS as initiator. Under the condition of below 50% conversion, the dependence of Rp on $[AN]^n$ and $[KPS]^n$ was found to be n=1.617-1.050 and n=0.83-0.96 for [AN] and [KPS], respectively. The effect of $[AN]^n$ and $[KPS]^n$ on particle number density (Np) was determined to be n=1.533 and n=0.733, respectively. The highest conversion was obtained under the conditions of pH=5 and ratio of total monomer (g) to water (g)=0.5. The mechanical properties of SBR obtained in this experiment were shown to be inferior to commercial SBR in terms of tensile strength, 300% modulus and elongation. It was found that cure rate of SBR prepared in this experiment was faster than that of commercial SBR.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.1
• /
• pp.66-71
• /
• 1986

The studies were carried out to screen the optimum conditions for enzymatic degumming of raw silk yarn and silk fabric by use of Alkalase, a protease produced by Bacteria, comparing with Papain and Trypsin representing natural proteolytic enzymes. 1. The optimum temperature and acidity of degumming solution were 70$^{\circ}C$, pH 5-6 for Papain degumming, 40$^{\circ}C$, pH 8 for Trypsin and 50-60$^{\circ}C$ pH 8-9 for Alkalase. 2. By increasing the Alkalase concentration in the range of 0.6 to 1.0 gram per liter, the time for enzymatic degumming of silk yarn could be reduced by 40 minutes. 3. In degumming of silk yarn by Alkalase, the pretreatment of 95$^{\circ}C$, 10 minutes at 0.1% sodium bicarbonate solution or posttreatent of 80$^{\circ}C$, 20 minutes at 2% (o.w.f.) sodium silicate solution improved the efficiency of enzymatic degumming, as compared to that of nontreatment. 4. The breaking strength, elongation and Lousiness results of enzymatically degummed silk yarn were apt to be improved more than those of soap-degummed one. 5. When the pretreatment of alkaline solution was done with over 20% of degumming ratio, the enzymatic degumming efficiency of both Havutae and Crepe de chine could be reached to the same level with those of soap-soda degummed. 6. As the pretreated silk fabric with 20% of degumming ratio was under action of three proteases, respectively, the deumming efficiency of Havutae and Crepe de chine were completed by Alkalase more than by Papain or Trpysin. 7. The stiffness of enzymatically degummed Crepe de chine was not only reduced by 17% more than that of soap-soda degummed one but also the Drape coefficient was decreased in enzymatically degummed fabrics, which was closely related with the soft touch of degummed fabrics.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.5
• /
• pp.279-288
• /
• 2002

Zinc phosphating for cold forming of steel was studied with emphasis on decreasing phosphating temperature. To lower phosphating temperature, some techniques, such as adding Cu ion into bath, using activator in the form of pre-dip, and aeration in bath, instead of using conventional accelerator, namely oxidizing agent, have been tried. It was revealed that phosphating, leading to coatings of Improved uniformity and fine crystal size, can be carried out using above techniques at lower temperature ($55^{\circ}C$) compared to conventional phosphating temperature ($80 ~ 90^{\circ}C$ ). Under present condition, it was seen that optimum concentrations of Cu ion in phosphating bath and activator in pre-dip are 0.015% (w/w) and 2.0 g/1, respectively. The coating weight was within the range of 15 ~ 20 g/$\m^2$. When lubricant was applied into phosphating coatings, the amount of lubricating component (total soap) was found to be 6 ~ 10 g/$\m^2$ and the lubricated panel revealed excellent lubricating properties.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.59-68
• /
• 2003

Zinc phosphating for cold forming of steel was studied with emphasis on decreasing phosphating temperature. To lower phosphating temperature, some techniques, such as adding Cu ion into bath, using activator in the form of pre-dip, and aeration in bath, instead of using conventional accelerator, namely oxidizing agent, have been tried. It was revealed that phosphating, leading to coatings of improved uniformity and fine crystal size, can be carried out using above techniques at lower temperature (55$^{\circ}C$) compared to conventional phosphating temperature ($80∼90^{\circ}C$). Under present condition, it was seen that optimum concentrations of Cu ion in phosphating bath and activator in pre-dip are 0.015 % (w/w) and 2.0 g/1, respectively. The coating weight was within the range of $\15∼20 g/m^2$. When lubricant was applied into phosphating coatings, the amount of lubricating component (total soap) was found to be$ 6∼10 g/\m^2$ and the lubricated panel revealed excellent lubricating properties.