• Journal of Korean Biological Nursing Science
• /
• 제12권3호
• /
• pp.195-205
• /
• 2010

Purpose: The purpose of this study was to develop the dietary approaches to stop hypertension (DASH) diet education program tailored to Korean adults and to examine the effect of the DASH diet education program on bone mineral density in middle aged women. Methods: The subjects of this study were 26 middle aged women, pre and post menopause, who attend a church located in Kyung-In district. The DASH group I (n=13) was provided with the DASH diet education program only, while the DASH group II (n=13) was provided with DASH diet education program along with calcium supplements (1 g/day). The DASH diet education program included one lecture on DASH diet, one face to face counseling, and five telephone counseling sessions during the 8 weeks period. Results: The knowledge and subjective compliance level of DASH diet increased significantly in both groups, at 4 and 8 weeks after the intervention. The level of objective compliance of DASH diet in both groups increased over the study period, but it was not significant as compared to those of the baseline. Bone mineral density of both groups decreased at 8weeks as compared to the baseline after the intervention. Conclusion: Although 8weeks of DASH diet education program increased the knowledge and compliance of DASH diet, it was not effective to bring the changes in bone mineral density among the middle aged women.

• 한국경제지리학회지
• /
• 제16권4호
• /
• pp.551-566
• /
• 2013

이 논문은 지난 10여 년간 우리나라가 채택한 산업클러스터 정책의 평가에 기초하여, 이 정책이 창조경제 실현을 목표로 하는 시대에서도 유효한 정책이 될 수 있을 것인지를 검토하고 향후 정책방향을 제시하기 위한 목적으로 작성되었다. 그동안의 산업클러스터 정책은 산 학 연 네트워킹의 개선과 혁신기반의 강화로 생산성 증가에 기여했지만, 정부 주도의 인위적 클러스터 만들기 정책으로 인해 개방적이고 유연한 클러스터의 발전이 이루어지지 못한 문제가 있었다. 산업클러스터는 창의성에 의한 혁신 유발과 가치창출이라는 창조경제의 선순환에 기여할 것으로 보았다. 그 효과를 극대화하기 위한 향후 정책방향으로서 지리적 집중과 상호 연계라는 클러스터의 본질에 충실할 것, 창조성이 보장되는 클러스터를 만들 것, 국지적-세계적 전략을 결합한 다중 스케일의 산업클러스터를 지향할 것, 지역정책과 산업정책 부문 간의 정합성을 확보할 것 등이 제안된다.

• 한국지반환경공학회 논문집
• /
• 제15권6호
• /
• pp.75-83
• /
• 2014

석션버켓기초는 펌프로 버켓 내부의 물을 외부로 배출할 때 발생한 압력차로 지반에 설치되는 기초이다. 버켓기초는 외해의 플랫폼이나 석유 가스 시추시설을 계류시키기 위한 앵커로 주로 사용되었으나, 최근 유럽을 중심으로 해상풍력발전의 기초로 적용되기 시작하면서 국내에서도 큰 관심을 받고 있다. 석션버켓기초의 관입저항력 산정은 석션버켓기초를 성공적으로 시공하기위해 고려해야 할 주요 사항 중의 하나이다. 본 연구는 석션버켓기초를 관입시킬 때 필요한 관입력을 평가하기 위해 실내모형실험을 수행하였다. 실내모형실험은 압입설치 및 석션설치에서 측정한 관입저항력을 관입성능평가에서 많이 사용되는 기존의 이론식과 비교하여 강도감소계수의 적절한 범위를 검토하였다.

• 한국환경보건학회지
• /
• 제36권3호
• /
• pp.191-198
• /
• 2010

The aim of this study was to determine the concentrations of air-borne microorganisms (bacteria, fungi, gram negative bacteria (GNB), endotoxins, and respirable suspended particles (RSPs), and their correlation with environmental parameters (temperature, humidity, and carbon dioxide levels) in duck houses. The mean concentrations of bacteria, fungi, and GNB were very high (> $10^6\;CFU/m^3$), and endotoxin levels exceeded $10^3\;EU/m^3$. Among the various work stages, in the task of receiving ducks, bacteria were $6.2{\times}10^6;CFU/m^3$, and GNB were $5.4{\times}10^6\;CFU/m^3$, while RSPs levels were $397.6\;{\mu}g/m^3$ and endotoxin levels were $47.2{\times}10^3\;EU/m^3$ in the task of dividing the ducks, and fungi were $4.9{\times}10^6\;CFU/m^3$ in the task of shipping the ducks. The concentrations of RSPs and endotoxins were significantly higher in tasks involving greater movement of ducks in the house, relative to tasks involving little movement of ducks (p<0.05). Further, with progression in growth of the ducks, the concentrations of bacteria, GNB, endotoxins, and RSPs were significantly increased. There was significant correlation between levels of GNB with bacteria (r=0.75) and fungi (r=0.86), endotoxins with RSPs (r=0.75), bacteria with fungi (r=0.39), and carbon dioxide with RSPs (r=0.38), bacteria (r=0.33), and endotoxins (r=0.31). These results suggest considerable respiratory hazard for farmers in these environments.

• Computers and Concrete
• /
• 제2권6호
• /
• pp.423-437
• /
• 2005

In this study two single-bay, three-storey space frames, one with brick masonry infill in the second and third floors representing a soft-storey frame and the other without infill were designed and their 1:3 scale models were constructed according to non-seismic detailing and the similitude law. The models were excited with an intensity of earthquake motion as specified in the form of response spectrum in Indian seismic code IS 1893-2002 using a shake table. The seismic responses of the soft-storey frame such as fundamental frequency, mode shape, base shear and stiffness were compared with that of the bare frame. It was observed that the presence of open ground floor in the soft-storey infilled frame reduced the natural frequency by 30%. The shear demand in the soft-storey frame was found to be more than two and a half times greater than that in the bare frame. From the mode shape it was found that, the bare frame vibrated in the flexure mode whereas the soft-storey frame vibrated in the shear mode. The frames were tested to failure and the damaged soft-storey frame was retrofitted with concrete jacketing and, subjected to same earthquake motions as the original frames. Pushover analysis was carried out using the software package SAP 2000 to validate the test results. The performance point was obtained for all the frames under study, therefore the frames were found to be adequate for gravity loads and moderate earthquakes. It was concluded that the global nonlinear seismic response of reinforced concrete frames with masonry infill can be adequately simulated using static nonlinear pushover analysis.

• Smart Structures and Systems
• /
• 제8권2호
• /
• pp.173-190
• /
• 2011

As a practical and effective seismic resisting technology, the base isolation system has seen extensive applications in buildings and bridges. However, a few problems associated with conventional lead-rubber bearings have been identified after historical strong earthquakes, e.g., excessive permanent deformations of bearings and potential unseating of bridge decks. Recently the applications of shape memory alloys (SMA) have received growing interest in the area of seismic response mitigation. As a result, a variety of SMA-based base isolators have been developed. These novel isolators often lead to minimal permanent deformations due to the self-centering feature of SMA materials. However, a rational design approach is still missing because of the fact that conventional design method cannot be directly applied to these novel devices. In light of this limitation, a displacement-based design approach for highway bridges with SMA isolators is proposed in this paper. Nonlinear response spectra, derived from typical hysteretic models for SMA, are employed in the design procedure. SMA isolators and bridge piers are designed according to the prescribed performance objectives. A prototype reinforced concrete (RC) highway bridge is designed using the proposed design approach. Nonlinear dynamic analyses for different seismic intensity levels are carried out using a computer program called "OpenSees". The efficacy of the displacement-based design approach is validated by numerical simulations. Results indicate that a properly designed RC highway bridge with novel SMA isolators may achieve minor damage and minimal residual deformations under frequent and rare earthquakes. Nonlinear static analysis is also carried out to investigate the failure mechanism and the self-centering ability of the designed highway bridge.

• Imaging Science in Dentistry
• /
• 제45권3호
• /
• pp.187-192
• /
• 2015

Cleidocranial dysplasia (CCD) is a rare congenital disorder, typically characterized by persistently open skull sutures, aplastic or hypoplastic clavicles, and supernumerary teeth. Mutations in the gene encoding the runt-related transcription factor 2 (RUNX2) protein are responsible for approximately two thirds of CCD patients. We report a 20-year-old CCD patient presenting not only with typical skeletal changes, but also complex dental anomalies. A previously undiagnosed odontoma, 14 supernumerary teeth, a cystic lesion, and previously unreported fused primary teeth were discovered on cone-beam computed tomography (CBCT) scans. Mutation analysis identified the causal c.578G>A (p.R193Q) mutation in the RUNX2 gene. At 20 years of age, the patient had already missed the optimal period for dental intervention. This report describes the complex dental anomalies in a belatedly diagnosed CCD patient, and emphasizes the significance of CBCT assessment for the detection of dental anomalies and the importance of early treatment to achieve good outcomes.

• Annals of Clinical Neurophysiology
• /
• 제17권2호
• /
• pp.68-72
• /
• 2015

Background: The effects of omega-3 polyunsaturated fatty acids (PUFAs) on cerebral vessels have not been clarified until now. Thus we investigated the efficacy of omega-3 PUFAs supplementation on cerebral blood flow velocity and vascular resistance via transcranial doppler (TCD). Methods: Consecutive twenty patients (13 male and 7 female) with at least 1 cerebrovascular risk factor or a known cerebrovascular disease were enrolled. Patients were treated with omega-3 PUFAs (1 g, two times per day) for 12 weeks. Cerebral blood flow velocity, resistance index, and pulsatile index were checked before and after 12 weeks of treatment using TCD. Results: The change of resistance index in right MCA (from $0.58{\pm}0.07$ to $0.55{\pm}0.07$, p = 0.042) and left PCA (from $0.56{\pm}0.07$ to $0.53{\pm}0.06$, p = 0.037) showed significant improvement after 12 weeks of omega-3 PUFAs treatment. The changes in other vessels, however, failed to show any significant changes compared to the baseline. Conclusions: Omega-3 PUFAs treatment showed feasible efficacies for cerebral vascular resistances in this open label trial. To confirm these results, larger samples of patients and longer period of follow-up is warranted.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.47-56
• /
• 2002

The office is an excellent candidate for implementing daylighting techniques because of the relatively high electric lighting power densities and long daytime use pattern. The quantity of light available for a space can be translated in term of the amount of energy savings through a process of a building energy simulation. To get significant energy savings in general illumination, the electric lighting system must be incorporated with a daylight - activated dimmer control. A prototype configuration of an office interior has been established and the integration between the building envelope and lighting and HVAC systems is evaluated based on computer modeling of a lighting control facility. First of all, an energy-efficient luminaire system is designed for both a totally open-plan office interior and a partitioned office. A lighting design and analysis program, Lumen-Micro 2000 predicts the optimal layout of a conventional fluorescent lighting fixture to meet the designed lighting level and calculates unit power density, which translates the demanded amount of electric lighting energy. A dimming control system integrated with the contribution of daylighting has been applied to the operating of the artificial lighting. Annual cooling load due to lighting and the projecting saving amount of cooling load due to daylighting under overcast diffuse sky are evaluated by a computer software, ENER-Win. In brief, the results from building energy simulation with measured daylight illumination levels and the performance of lighting control system indicate that daylighting can save over 70 percent of the required energy for general illumination in the perimeter zones through the year. A 25 % of electric energy for cooling may be saved by dimming and turning off the luminaires in the perimeter zones.

• Journal of Microbiology
• /
• 제38권2호
• /
• pp.80-87
• /
• 2000

The nucleotide sequence of the luxC gene coding for lux-specific fatty acyl-CoA reductase and the upstream DNA (325bp)of the structural gene from bioluminescent bacterium, Photobacterium phosphoreum, has been deternubed. An open reading frame extending for more than 20 codons in 325 bp DNA upstream of luxC was not present in both directions. The lux gene can be translated into a polypeptide of 54 kDa and the amino acid sequences of lux specific reductases of P. phosphoreum shares 80, 65, 58, and 62% identity with those of the Photobacterium leiognathi, Vibrio fischeri, Vibrio harveyi, and Xehnorhabdus luminescenens reductases, respectively. Analyses of codon usage, showing that a high frequency (2.3%) of the isoleucine codon, AUA, in the luxC gene compared to that found in Escherichia coli genes (0.2%) and its absence in the luxA and B genes, suggested that the AUA codon may play a modulator role in the expression of lux gene in E. coli. The structural genes (luxC, D, A, B, E) of the P. phosphoreum coding for luciferase (${\alpha}$,${\beta}$) and fatty acid reductase (r, s, t) polypeptides can be expressed exclusively in E. coli under the T7 phage RNA polymerase/promoter system and identificationof the [35S]methionine labelled polypeptide products. The degree of expression of lux genes in analyses of codon usage. High expression of the luxC gene could only be accomplished in a mutant E. coli 43R. Even in crude extracts, the acylated acyl-CoA reductase intermediate as well as acyl-CoA reductrase activities could be readily detected.