• 설비공학논문집
• /
• 제15권5호
• /
• pp.382-388
• /
• 2003

Refrigerant flow rates of the multi-type air-conditioning system can be regulated by electronic expansion valves (EEV). The performance of the multi-type air-conditioning system may be improved by lowering the superheat at the compressor suction side. In this study, a superheat temperature setpoint reset algorithm was developed by using fuzzy logics, and a PI algorithm was applied to control the superheat temperature near setpoints. Experimental results showed energy savings and stable operations at a multi-type air-conditioning system. Therefore, the developed setpoint reset algorithm may be effectively used for the EEV superheat temperature control of the multi-type air-conditioning system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.962-966
• /
• 1996

A conventional PI controller does not provide a proper response in face of various kinds of load variation. In this paper, three types of fuzzy-PI hybrid control scheme are proposed in order to improve the performance of the PI controller. The proposed control schemes are applied to the speed controller of AC servo motor systems. The effectiveness of the proposed methods is shown by computer simulation and the advantage of each control scheme is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.795-798
• /
• 1991

The hybrid positon/force control is required when two or more robots perform a coorperative task in a uncertain environment, or when single robot does a task with a constant force to the environment. In this paper, a new control algorithm which control simultaneously the position and the force are proposed, however, especially the conventional position controller employed in the present robot control is used. Moreover, in order to improve the output response characteristics of the system, the PI gains which were computed from the PI gain tunning techniques, are varied based on the results of the Fuzzy algorithm.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.1-7
• /
• 1999

This paper gives a simulation study of a new fuzzy logic control(FLC) approach for the mold level control in continuous casting processes. The proposed FLC is PID type hybridizing the conventional fuzzy PI control and Fuzzy PD control with a simplified design scheme. It is shown that, compared with the conventional control, this new control strategy can achieve superior performance for steady-state response and is more robust against process parameter variations and disturbances.

• 한국지능시스템학회논문지
• /
• 제18권4호
• /
• pp.488-493
• /
• 2008

본 논문은 연속 주조 공정에서의 용강 높이에 대한 수학적인 비선형모델을 유도하는데, 여기에는 용강 높이, 몰드내의 입출력 유량, 스토퍼의 위치와 입력유량의 관계 등이 고려되었다. 비선형 모델은 MATLAB을 사용하여 구현되었으며 실제 데이터와 비교하여 수학적 모델이 유효함을 확인하였다. 구현된 비선형 모델을 사용하여, 퍼지 시스템에 의하여 변화하는 $K_p$값을 가지는 퍼지 PI 제어기를 사용하여, 기존에 사용되던 PI 제어기보다 나은 제어 성능 및 외란에의 강인성을 가짐을 시뮬레이션으로 보였다.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.303-311
• /
• 2012

In this study, we introduce a dynamic process model as well as the design methodology of optimized fuzzy controller for its efficient application to vacuum production system to produce a semiconductor, solar module and display and so on. In a vacuum control field, PID control method is widely used from the viewpoint of simple structure and preferred performance. But, PID control method is very sensitive to the change of environment of control system as well as the change of control parameters. Therefore, it's difficult to get a preferred performance results from target system which has a complicated structure and lots of nonlinear factors. To solve such problem, we propose the design methodology of an optimized fuzzy PID controller through a following series of steps. First a dynamic characteristic of the target system is analyzed through a series of experiments. Second the process model is built up and its characteristic is compared with real process. Third, the optimized fuzzy PID controller is designed using genetic algorithms. Finally, the fuzzy controller is applied to target system and then its performance is compared with that of other conventional controllers(PID, PI, and Fuzzy PI controller). The performance of the proposed fuzzy controller is evaluated in terms of auto-tuned control parameters and output responses considered by ITAE index, overshoot, rise time and steady state time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.994-996
• /
• 2000

Switched reluctance motor generally operates in the magnetically saturated region because the saturation gives several benefits to its performance. This paper investigates the modelling and fuzzy tuning PI control of a nonlinear switched reluctance motor. The modelling is performed through neural network technique. Fuzzy auto-tuning PI control is designed for a robust performance in load and speed variations. Simulation and experimental results indicate better performances compared with simple PI control.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.568-576
• /
• 1998

In this thesis discuss with a flexible robotic finger design and controller which is used for the micro flexible robotic finger. So, miniaturization, precision, controller for the control of grasping force and actuator were needed. And, even if we develop a new actuator and controller, in order to use on real system, we must considerate of a many side problem. In a force control of micro flexible finger for grasping an object, the fingertip's vibration was more important task of accuracy control. And, controller were adopt the PD/PI mixed type fuzzy controller. The controller were consist of two part, one is a PD type fuzzy controller for increase the rising time response, the other is a PI type fuzzy controller for decrease of steady-state error. Especially, in a PD type fuzzy controller, we used only seven rules. And, for a PI controller, we adopt a reset factor for the control of input values. so, we have overcome the exceed of controller's input range. For the estimate of ontroller's utility and usefulness, we have experiment and computer simulation of three cases. First, we consider of unit force grasping control for a task object, which is 0.03N. Second, bounding grasping force control which is add to a sinusoidal force on the unit force. At this cases the task force is (0.03+0.01 sin wt N). And consider of following of rectangular forces.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.473-479
• /
• 2016

본 논문은 가격이 저렴하고 친환경적이면서도 고성능, 고내구성, 구조적 단순함의 장점을 갖고 있어 최근에 폭넓은 관심을 받고 있는 스위치드 릴럭턴스 모터(SRM: Switched Reluctance Motor)의 보다 정확하고 안정적인 전류제어 방법에 대해 설명한다. 대부분의 전동기의 전류제어 방법에는 알고리즘과 제어 이득의 선정이 다른 제어기에 비해 상대적으로 간편한 PI 제어기를 이용한 방법이 주로 사용되어 왔다. 그러나 일반적인 PI 제어기는 SRM과 같이 고정자 권선의 전류 및 회전자의 위치마다 비선형적으로 파라미터가 급변하는 시스템의 경우 변하는 동작 지점마다 제어 이득을 조정해 주어야 하는 어려움이 발생한다. 본 논문에서는 비선형적으로 특성이 변하는 SRM 드라이브 시스템에 제어 성능이 우수한 자기동조 퍼지 제어기를 이용한 제어기법을 적용하여 비선형적인 파라미터의 변화에도 보다 안정적인 전류제어가 가능한 것을 보였다. 또한 Matlab/Simulink 시뮬레이션을 이용하여, SRM 드라이브의 전류제어에 PI 전류 제어기(PICC: PI Current Controller)와 자기동조 퍼지 전류 제어기(STFCC: Self-tuning Fuzzy Current Controller)를 각각 적용한 후 그 결과를 비교하였으며 제안한 자기동조 퍼지 제어기의 제어성능이 우수함을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.234-239
• /
• 2009

In this article we present the simulation results of induction motor speed regulation by direct torque control with a classic PI regulator. The MATLAB Simulink programming environment is used as a simulation tool. The results obtained, using a fuzzy logic, shows the importance of this method in the improvement of the performance of such regulation.