• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1072-1075
• /
• 1993

To design a fuzzy controller for DC servo-motor, a systematic procedure is proposed. Fuzzy rule base is simply designed through utilizing both the PID gain and the pole-zero cancelation. The results of simulation show that the control system has good performances.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 추계학술대회 학술발표 논문집
• /
• pp.181-184
• /
• 1997

This paper propose the systematic procedure of the fuzzy model based controller for the continuous nonlinear system. Fuzzy controller have been successfully applied to many uncertain and complex industrial plants. The design of the fuzzy controller mainly depends on the knowledge from the expert who are familiar with the plant by trial and error. Therefore we need more systematic approach to the design of the fuzzy controller. In this paper, we design fuzzy model based controller applied to the nonlinear system. Unlike the design procedures reported in[8] and[9], we use the nonlinear process directly in designing the controller. This controller has been successfully applied to an inverted pendulum.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.331-336
• /
• 1998

A systematic design method for PDC(Parallel Distributed Compensation)-type continuous time Takagi-Sugeno(T-S in short) fuzzy control systems which have inaccessible states is developed in this paper. Reduced-dimensional fuzzy state estimator is introduced from existing T-S fuzzy model using the PDC structure of Wang et al. [1] LMI(Linear Matrix Inequalities) problems which represent the stabililty of the reduced-dimensional fuzzy state estimator are derived. Pole placement constraints idea for each rules is adopted to determine the estimator gains and they are also revealed as LMI problems. these LMI problems are combined with Joh et al's [7][8] LMI problems for PDC -type continuous time T-S fuzzy controller design to yield a systematic design method for PDC -type continuous time T-S fuzzy control systems which have inaccessible states.

• 한국지능시스템학회논문지
• /
• 제2권3호
• /
• pp.29-39
• /
• 1992

We investigate a systematic design procedure of automatic rule generation of fuzzy logic based controllers for highly nonlinear dynamic systems such as an engine dynamic modle. By "automatic rule generation" we mean autonomous clustering or collection of such meaningful transitional relations from one conditional subspace to another. During the design procedure, we also consider optimaly control strategies such as minimum squared error, near minimum time, minimum energy or combined performance critiera. Fuzzy feedback control systems designed by our method have the properties of closed-loop stability, robustness under parameter variabitions, and a certain degree of optimality. Most of all, the main advantage of the proposed approach is that reliability can be potentially increased even if a large grain of uncertainty is involved within the control system under consideration. A numerical example is shown in which we apply our strategic fuzzy controller dwsign to a highly nonlinear model of engine idling speed control.d control.

• 제어로봇시스템학회논문지
• /
• 제12권3호
• /
• pp.227-232
• /
• 2006

In this paper, we propose a systematic method for intelligent digital redesign of a fuzzy-model-based controller for continuous-time nonlinear system which may also contain system uncertainties. The continuous-time uncertain TS fuzzy model is first contructed to represent the uncertain nonlinear system. A parallel distributed compensation(PDC) technique is then used to design a fuzzy-model-based controller for both stabilization. The designed continuous-time controller is then converted to an equivalent discrete-time controller by using a globally intelligent digital redesign method. This new technique is designed by a global matching of state variables between analog control system and digital control system. This new design technique provides a systematic and effective framework for integration of the fuzzy-model-based control theory and the advanced digital redesign technique for nonlinear systems with uncertainties. Finally, Chaotic Lorenz system is used as an illustrative example to show the effectiveness and the feasibility of the developed design method.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.18-24
• /
• 2018

This paper focuses on systematic design about the membership ranges of the main design factors such as control error, control error rate, and sampling time for the fuzzy logic control of the variable speed drive refrigeration cycle. The upper and the lowest limit of the membership ranges are set up from the data of static characteristics obtained by experiments. Three kinds of membership ranges on the control error and the control error rate are tested by experiments. Especially, an effect of sampling time on control performance is also investigated in the same way. Experimental data showed the control error rate and the sampling time strongly effected on the control performance of the refrigeration cycle with a variable speed drive.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1234-1243
• /
• 1992

본 연구에서는 국부적인 퍼지제어 셀(fuzzy control cell:cell)을 도입하여 계산량 감소를 달성하고, 추론과정을 선형근사화한 조직적인 설계를 통하여 선형제어 이론을 FLC의 실용적인 면에 접목하고자 한다. 이를 위하여, 확률밀도함수 형태의 멤버쉽함수(membership function)와 선형화된 제어공간이 얻어지도록 전반적인 제어방 책을 결정한 다음, 주어진 상태에 가장 지배적(dominant)인 규칙을 갖는 몇 개의 대표 점을 찾아서 그 점들로 구성된 퍼지제어 셀을 생성하고, 퍼지연산을 생성된 셀에서만 수행하여 알고리즘과 계산을 단순화시킨다. 평가기준을 공평함에 두어서 조건부연결 어 'AND'에 T-norm인 대수곱을 적용하여 적합도를 취하고, 규칙들의 작용이 병렬발화 라는 관점으로 규칙연결어 'ALSO'는 'AND'의 공액인 'OR'에 해당되는 대수합연산 대신 에 확률측도와 유사한 산술평균을 적용하여 퍼지추론을 한다. 그리고, 각각의 제어 규칙에 대하여 퍼지추론한 결과와 그것의 평균중심을 곱하여 통합한 후, 무게중심법으 로 역퍼지화하여 일반화된 제어값을 얻는다. 이 값을 PID제어기를 이용하여 구현한 디지틀 보상기를 통과시켜 시스템에 한 제어를 얻는 조직적인 방법을 제안한다.

• 한국지능시스템학회논문지
• /
• 제11권7호
• /
• pp.615-620
• /
• 2001

This paper addresses the design of sliding model fuzzy-model-based controller using genetic algorithms. In general, the construction of fuzzy logic controllers has difficulties for the lack of systematic design procedure. To release this difficulties, the sliding model fuzzy-model-based controllers was presented by authors. In this proposed method, the fuzzy model, which represents the local dynamic behavior of the given nonlinear system, is utilized to construct the controller. The overall controller consists of the local compensators which compensate the local dynamic linear model and the feed-forward controller which is designed via sliding mode control theory. Although, the stability and the performance is guaranteed by the proposed method, some design parameters have to be chosen by the designer manually. This problem can be solved by using genetic algorithms. The proposed method tunes the parameters of the controller, by which the reasonable accuracy and the control effort is achieved. The validity and the efficiency of the proposed method are verified through simulations.

• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.28-37
• /
• 2018

When the wind speed rises above the rated wind speed, the produced power of the wind turbines exceeds the rated power. Even more, the excessive power results in the undesirable mechanical load and fatigue. A solution to this problem is pitch control of the wind turbines. This paper presents a systematic design method of a collective pitch controller for the wind turbines using a discrete fuzzy Proportional-Integral (PI) controller. Unlike conventional PI controllers, the fuzzy PI controller has variable gains according to its input variables. Generally, tuning the parameters of fuzzy PI controller is complex due to the presence of too many parameters strongly coupled. In this paper, a systematic method for the fuzzy PI controller is presented. First, we show the fact that the fuzzy PI controller is a superset of the PI controller in the discrete-time domain and the initial parameters of the fuzzy PI controller is selected by using this relationship. Second, for simplicity of the design, we use only four rules to construct nonlinear fuzzy control surface. The tuning parameters of the proposed fuzzy PI controller are also obtained by the aforementioned relationship between the PI controller and the fuzzy PI controller. As a result, unlike the PI controller, the proposed fuzzy PI controller has variable gains which allow the pitch control system to operate in broader operating regions. The effectiveness of the proposed controller is verified with computer simulations using FAST, a NREL's primary computer-aided engineering tool for horizontal axis wind turbines.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.198-198
• /
• 2000

In this paper, the linearization method of nonlinear systems via fuzzy controllers which can be the basic research for designing a systematic fuzzy controllers with singleton consequents is proposed. We regard a closed loop system as a canonical form and propose a methodology for linearization of nonlinear system which adjust the input at vertex using zero condition and affinity condition. Through some examples, we show the validity of the proposed method and it can be extended to the design problem of fuzzy controller.