목포항은 2018년 현재 개항 131주년이 되었으며 목포항의 신항만 개발 등의 조치를 취하였으나 목포항에 대한 해운항만물류 정책 미비 및 정부투자 미비로 항만으로서의 기능이 매우 약해져 있으며 이로 인해 항만물류가 활성화 되지 않고 있는 실정이다. 또한 목포항에 대한 연구 또한 2008년 이후 거의 이루어지지 않고 있는 실정이며 연구 내용 또한 선언적인 연구에서 벗어나지 못하고 있다. 한편, 항만 경쟁력에 대한 연구는 항만 경쟁력 결정요인을 분석하는 방법이 주를 이루고 있다. 따라서 본 연구에서는 목포항에 대한 연구를 확대하고 기존의 연구 방법에서 벗어나 목포항의 운항적인 측면을 고려한 비경쟁 요인에 대한 분석을 실시하고 개선방안을 제시하고자 하였다. 이를 위해 먼저 AHP 분석 기법을 통하여 비경쟁 요인의 중요도를 평가하고 FSM 분석 기법을 통하여 비경쟁 요인들 간의 영향도를 분석하였다. AHP 분석 결과는 목포항 주변 산업단지 비활성화, 정기항로 노선수, 도선/도선선료 등이 중요한 비경쟁 요인으로 평가되었으며 FSM 분석 결과, 목포항의 비경쟁력 요인이 최상층 레벨집합의 요인으로 파악되었으며 정기항로 노선수, 도선/도선선료, 선박 입출항 비용, 내륙 운송 비용, 항만시설 이용료, 하역비용으로 나타났다. 타 요인에 가장 많은 영향을 미치는 최하층 레벨집합의 항목은 목포항 주변 산업단지 활성화, 배후지역과 연결성, 입출항 항로의 길이/소요시간, 글로벌 대형 항만과의 접근성, 각종 인센티브, 이송/보관 비용으로 분석되었다. 이와 같이 분석한 결과를 근거로 하여 목포항 비경쟁 요인에 대한 개선방안을 제시하였다.
3차원 게임은 게임 시나리오의 다양한 요소에 의한 복잡도가 증가함에 따라 게임 객체들의 상호 관계를 제어하기 위한 문제점을 가진다. 그러므로, 게임 시스템은 각 게임 객체들의 응답을 조정하는 방법의 필요성을 가진다. 또한, 게임 시나리오의 결과에 따라 게임 객체들의 행동 애니메이션을 제어하기 위한 개념들도 필요하다. 사실적 게임 시뮬레이션을 생성하기 위해 시스템은 게임 객체들의 상호작용을 디자인 할 수 있는 구조를 포함해야 한다. 본 논문에서 게임 시나리오상에 게임 객체들의 상호작용 설계를 위해 동적 제어를 디자인하는 기법을 소개한다. 이 방법을 위해 특정 규칙을 이용한 의사결정이 가능한 지능적 에이전트 기반 구조로써 게임 에이전트 시스템을 제안한다. 게임 에이전트 시스템은 환경 데이터 처리, 게임 객체 시뮬레이션, 게임 객체들간의 상호작용 제어, 게임 객체들의 다양한 상호 관계를 정의할수 있는 시각 저작 인터페이스를 제공하기 위해 이용되어진다. 이들 기술들은 게임 객체의 자율성과 연관된 충돌 회피 기법 등을 처리한다. 또한, 장면의 변경으로부터 게임 객체들의 일관된 의사 결정력을 가능하게 한다. 본 논문에서는 규칙기반 행동 제어가 게임 객체의 시뮬레이션을 안내하기 위해 디자인되어졌다. 시각적 요소들로 구성된 에이전트 상태 결정 네트워크는 정보전달과 게임 객체들 사이의 현상태를 추론할 수 있다. 이들 기법들은 실시간으로 게임 객체들간의 동작 상태 변이를 체크하고 모니터링 할 수 있다. 마지막으로 간단한 사례 연구 예와 함께 제어 기법의 타당성을 제시한다.
본 논문에서는 동북아시아 24개 컨테이너항만들의 4년간 자료(2009년-2012년)를 이용하여 5개의 투입요소(겐트리 크레인 수, 선석 수, 총 선석길이, 터미널면적, 평균수심), 2개의 산출요소(컨테이너화물처리량, 직기항 선사수)를 이용하여 항만효율성 측정 시 AR가중치를 부여하는 방법(다중회귀분석방법과 AHP방법)을 실증적으로 검증하였다. 즉, AHP/DEA-AR분석 결과에 대해서, 다중회귀분석방법으로 AR을 결정하고 항만들의 효율성을 측정한 후에 항만들 간의 순위를 이용하여 윌콕슨부호순위검정과 Mann-Whitney 윌콕슨 순위 합 검정방법으로 그 결과를 비교분석하여 검증하였다. 실증분석의 주요한 결과는 다음과 같다. 첫째, 측정한 순위를 근거로 윌콕슨부호순위검정을 실시한 결과 P값(유의확율)이 유의수준 0.05보다 훨씬 더 크게 나타났으므로, 귀무가설 Ho는 채택하였다. 즉, AHP/DEA-AR모형에 의한 효율성 순위와 다중회귀분석에서 도출된 AR을 이용한 효율성분석에 의한 순위에는 차이가 없는 것으로 나타났다. Mann-Whitney 윌콕슨 순위 합 검정도 동일한 결과를 보였다. 둘째, 평균적으로 보았을 때, 윌콕슨 부호순위검정에서 P값(유의확율)이 평균 0.845 수준에서 양 모형의 효율성 수치에 의한 순위가 서로 일치함을 보여 주었으며, Mann-Whitney 윌콕슨 순위 합 검정의 평균유의확율은 0.963으로 더 높게 나타났다. 셋째, 전체자료를 한꺼번에 고려하여 측정한 경우에는 윌콕슨부호순위검정에서 상대적으로 유의확율이 크게 낮아(0.845->0.694)졌으며, Mann-Whitney 윌콕슨 순위 합 검정도 낮아(0.963->0.925)졌다. 본 논문의 정책적인 함의는 항만운영자들이나 항만정책의 입안가들이 항만들에 대한 효율성을 측정할 때, 본 논문에서 제시한 AR가중치를 적용한 방법을 도입하여 시행함으로써 보다 정확한 항만효율성을 측정할 수 있어야만 한다는 점이다. 또한 더욱 확장시켜서 AHP법과 다중회귀분석방법을 접목한 방법을 도입하여 측정해야만 한다는 점이다. 항만투자금액을 결정할 때, 그러한 측정결과도 참고한다면 효과적인 항만관리 및 정책이 시행될 수 있을 것으로 확신한다. 본 논문의 한계는 퍼지분석법, 비방사적 DEA분석을 도입하지 못했으며, 그리고 AHP법과 다중회귀분석방법을 혼합한 측정결과를 제시하지 못했다는 점이다. 차후연구에서 다루고자 한다.
복잡성(complexity)은 신제품개발 과정에서 프로젝트 팀이 빈번하게 당면하는 개발과제의 주요 속성으로 이에 대한 적절한 대처 여부는 신제품개발의 성과에 적지 않은 영향을 미친다. 복잡성이란 속성이 신제품개발의 관리에서 주목 받게 된 배경으로는, 우선 제품개발과정에서 당면하는 복잡성이 증가 추세에 있다는 점을 들 수 있다. 새로운 기술과 공법 그리고 소재의 등장, 복합 제품의 개발(예: 디지털 컨버전스), 또한 기업간 제휴를 통한 개발은 신제품개발의 복잡성 증대와 관련이 된다. 한편 신제품개발의 복잡성에 대한 미흡한 대처는 개발과정의 지연, 개발비용의 예산 초과, 제품개발의 포기 등과 같은 부정적 결과를 초래한다. 이와 같이 복잡성의 증대 추세 및 복잡성으로 인한 적지 않은 영향력을 고려해볼 때, 신제품개발 과정에서 당면하는 복잡성에 대한 연구의 필요성은 증대된다. 그러나 아직까지 복잡성에 대한 연구는 현실적 필요성에 비해 상대적으로 적은 관심만이 기울여져 왔다. 본 고에서는 신제품개발 과정에서 당면하는 복잡성에 대한 주요 연구과제들을 살펴보는데 그 목적이 있다. 이를 위해 우선, 주요 영역별로 나누어 그간의 복잡성에 대한 연구성과를 정리한 다음, 이를 토대로 향후 중요시되는 연구과제들을 도출하고자 한다. 신제품개발 과정의 복잡성에 대한 주요연구과제에 대한 이러한 고찰은, 향후 이 분야에 대한 연구 전개에 있어서 하나의 발판이 될 것으로 기대된다.
The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70