• 인지과학
• /
• 제13권1호
• /
• pp.13-21
• /
• 2002

퍼지 논리를 이용한 추론은 일부의 정보가 무시되어 적절하지 못한 추론 결과를 초래할 수 있다. 또한 신경망은 패턴 처리에는 적합하지만 인간의 지식을 모델링하기 위해서 필요한 논리적인 추론에는 부적합하다. 하지만 신경 망의 변형인 신경 논리 망을 이용하면 논리적인 추론이 가능하다. 따라서 본 논문에서는 기존의 신경 논리 망을 기반으로 하는 추론 망을 확장하여 퍼지 추론 망을 구성하고 기존의 추론 망에서 사용되는 전파규칙을 보완하여 적용하고자 한다. 퍼지 추론 망에서 퍼지 규칙의 결론부에 해당하는 명제의 믿음 값을 결정하기 위해서는 추론하고자 하는 명제에 연결된 노드들을 탐색해야 한다. 이를 위해, 연결된 모든 노드들의 링크를 따라 순차적인 탐색을 하는 경우와 링크에 부여된 우선순위에 의해 탐색을 하는 경우의 탐색비용에 대하여 실험을 통해 비교 평가하였다. 실험결과 퍼지 추론 망의 크기가 확장될수록, 그리고 탐색 경험의 횟수가 증가할수록 순차적인 탐색전략보다 우선순위에 의한 탐색전략이 탐색 비용면에서 효율성이 더욱 증가함을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.793-800
• /
• 2004

The purpose of this study is to develope a servo system with faster and more accurate response. This paper describes a method of approximate reasoning for fuzzy control of servo system based on the decomposition of $\alpha$-level fuzzy sets. We propose that fuzzy logic algorithm is a body from fuzzy inference to defuzzificaion cases where the output variable u directly is generated PWM The effectiveness for robust and faster response of the fuzzy control scheme are verified for a variable parameter by comparison with a PID control and fuzzy control A position control of DC servo system with a fuzzy logic controller is demonstrated successfully.

• 대한한의진단학회지
• /
• 제19권3호
• /
• pp.141-149
• /
• 2015

Objectives Recently the fuzzy logic is widely used in the decision making, identification, pattern recognition, optimization in various fields. In this study, we propose the fuzzy logic as the objective method of distinguishing hot and cold, the basis of diagnosis in Korean medicine. Methods We developed fuzzy inference system to distinguish whether the subjects had hot or cold. The cold and hot questionnaire of Korean traditional university textbook, the pulse rate and the DITI value of face used in the system. These three kinds of information were defined as 'fuzzy sets,' and 54 fuzzy rules were established on the basis of clinical practitioners' knowledge. The fuzzy inference was performed by using the Mamdani's method. To evaluate the usefulness of the fuzzy inference system, 200 cases of data measured in the Woosuk university hospital of oriental medicine were used to compare the determining hot, normal, cold results obtained from the experts and from the proposed system. Results As a result, 100 cases of "cold", 54 cases of "normal", and 34 cases of "hot" were matched between the experts and the proposed system. This fuzzy system showed the conformity degree of 94%(${\kappa}=0.853$). Conclusions In this study, we could express the process of distinguishing hot-cold using the fuzzy logic for objectification and quantification of hot-cold identification. This is the first study that introduce a fuzzy logic for distinguish pattern identification. The degree of the heat characteristic of the patients inferred by this system could provide a more objective basis for diagnosing the hot-cold of patients.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.863-868
• /
• 1992

This paper presents a method on applying Genetic Algorithm(GA), which is a well-known high performance optimizing algorithm, to construct the self-organizing fuzzy logic controller. Fuzzy logic controller considered in this paper utilizes Sugeno's hybrid inference method, which has an advantage of simple defuzzification process in the inference engine. Genetic algorithm is used to find the optimal parameters in the FLC. The proposed approach will be demonstrated using 2 d.o.f robot manipulator to verify its effectiveness.

• 한국지능시스템학회논문지
• /
• 제2권3호
• /
• pp.58-67
• /
• 1992

This paper presents a method on applying Genetric Algorithms(GA), which is a well-know high performance optimizing algorithm, to construct the self-organizing fuzzy logic controller. Fuzzy logic controller considered in this paper utilized Sugeno's hybrid inference method. which has an advantage of simple defuzzification process in the inference engine. Genetic algorithm is used to find the iptimal parameters in the FLC. The proposed approach will be demonstrated using 2 d. o. f robot manipulator to verify its effectiveness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권3호
• /
• pp.289-304
• /
• 2010

This paper proposes a novel scheme for cooperative spectrum sensing on distributed cognitive radio networks. A fuzzy logic rule - based inference system is proposed to estimate the presence possibility of the licensed user's signal based on the observed energy at each cognitive radio terminal. The estimated results are aggregated to make the final sensing decision at the fusion center. Simulation results show that significant improvement of the spectrum sensing accuracy is achieved by our schemes.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권1호
• /
• pp.67-72
• /
• 2013

Cloud detection and analysis from satellite images has been a topic of research in many atmospheric and environmental studies; however, it still is a challenging task for many reasons. In this paper, we propose a new method for cloud-type classification using fuzzy logic. Knowing that visible-light images of clouds contain thickness related information, while infrared images haves height-related information, we propose a two-layered fuzzy logic based on the input source to provide us with a relatively clear-cut threshold in classification. Traditional noise-removal methods that use reflection/release characteristics of infrared images often produce false positive cloud areas, such as fog thereby it negatively affecting the classification accuracy. In this study, we used the color information from source images to extract the region of interest while avoiding false positives. The structure of fuzzy inference was also changed, because we utilized three types of source images: visible-light, infrared, and near-infrared images. When a cloud appears in both the visible-light image and the infrared image, the fuzzy membership function has a different form. Therefore we designed two sets of fuzzy inference rules and related classification rules. In our experiment, the proposed method was verified to be efficient and more accurate than the previous fuzzy logic attempt that used infrared image features.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.704-709
• /
• 1993

In this paper, a method of using a look-up table for a fuzzy logic controller is proposed. A look-up table is designed for a fast inference. An algorithm for an inference is developed with a view to decrease execution time. The performance of the developed fuzzy controller is compared with that of the traditional one.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.310-316
• /
• 2003

One of the significant subject in the automatic arc welding is to establish control system of the welding parameters for controlling bead geometry as a criterion to evaluate the quality of arc welding. This paper proposes an inference algorithm for bead geometry in CMA Welding using Neuro-Fuzzy algorithm. The characteristic welding parameters are measured by the circuit composed of hall sensor, voltage divider tachometer, etc. and then the bead geometry of each weld pool is calculated and detected by an image processing with CCD camera and a measuring with microscope. The relationships between the characteristic welding parameters and the bead geometry have been arranged empirically. From the result of experiments, membership functions and fuzzy rules are tuned and determined by the learning of neural network, and then the relationship between actual bead geometry and inferred bead geometry are concluded by fuzzy logic controller. In the applied inference system of bead geometry using Neuro-Fuzzy algorithm, the inference error percent is within -5%∼+4% in case of bead width, -10%∼+10% in bead height, -5%∼+6% in bead area, -10%∼+10% in penetration. Use of the Neuro-Fuzzy algorithm allows the CMA Welding system to evaluate the quality in bead geometry in real time as the welding parameters change.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.491-498
• /
• 1997

본 연구에서는 졸음운전 방지를 위한 방법으로 기존의 3단계 경고음법과 fuzzy logic을 이용한 가성도 측정 및 제어법을 시뮬레이션으로 비교 및 분석하였다. 각성상태를 제어하는 방법으로 사용되었던 기존의 각성제어지표는 실 차에는 사용될 경우 효과적이지 못하므로 각성상태에 따른 영역별 Nz와 IRI의 상관분포도를 분석하여 기존의 각성제어지표를 수정하였다. Fuzzy 추론으로는 Sugeno의 방법을 사용하였고 멤버쉽함수와 제어규칙 베이스는 수정된 각성제어지표로부터 결정하였다. 시뮬레이션 결과 60이하의 IRI가 발생되는 경우, Nz의 변화에 따라 두 제어방법 모두 small, medium, big의 경고음이 발생되었으나 3단계 경고음법은 다음 단계의 발생영역이 될 때까지 같은 출력만을 발생한다. 그러나 퍼지추론의 출력은 피검자의 각성수준의 변화에 잘 추종하여 변화되었으므로 3단계 경고음법의 문제점을 해겨할 수 있었고 더욱이 퍼지 추론의 출력과 Nz와의 상관계수(r=0.99)가 매우 높았으므로, 실제 운전시 퍼지추론 방법을 이용한 각성도 평가 및 제어에 적용할 경우 3단계 경고음법 보다 효과적일 것으로 기대된다.