• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.233-239
• /
• 2014

The slagging which generated from ash deposition on furnace wall and tube in boiler reduces the heat transfer efficiency and damages to safety of boiler. The slag flow behavior in boiler is affected by melting temperature which is related to ash compositions. In this study, the behavior of slag is researched by using ash fusibility test, called TMA (Thermo-Mechanical Analysis). The technique measures the percentage shrinkage as the function of temperature, T25%, T50%, T75%, T90%. These temperatures indicate different stages of melting. Then, the effect of ash chemical compositions measured from XRF (X-ray Fluorescence Spectrometer) to ash fusion temperatures is discussed. Among the chemical compositions, refractory and fluxing influence on ash fusibility is described. High levels of refractory component and limited amount of fluxing components ($Fe_2O_3$, $K_2O$, CaO) increase overall melting temperatures. High $SiO_2/Al_2O_3$ ratio decrease high melting temperatures (T75%, T90%). Meanwhile, the presence of reasonable levels of fluxing components reduces overall melting temperature. A presence of fluxing component such as $K_2O$ and CaO is found to decrease the T25% values significantly. From this research, it is possible to make a reasonable explanation and prediction of ash fusion characteristic from analysis of TMA results and ash chemical compositions.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.427-434
• /
• 2012

The fuel characteristics and combustion behaviors of bituminous (Anglo) and sub-bituminous (Tanito) coals used in 500MW coal fired power plant have been investigated. With ashes of those coals, the ash fusibility is characterized with thermo mechanical analyzer, and the advanced ash slagging propensity, BHEL index, has been obtained. The melting-down of tanito coal ash happened in the temperature range of 1,200 to $1,250^{\circ}C$, and for anglo coal ash it occurred near $1,550^{\circ}C$. BHEL indices for two coals gives the high slagging propensity, and these are compared with the existing traditional indices which give different tendencies.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.433-441
• /
• 1992

Chemical composition and fusibility of coal ash were measured for 23 Korean anthracite coals. The relationship between chemical properties and fusion temperature of coal ash was investigated. The slagging and fouling in firing the pulverized coal for boiler was assessed for the coal samples. It was found that most ashes contained more than 80% of $SiO_2$ and $Al_2O_3$ whereas less than 1% of $Na_2O$. And also fusion temperature of ashes occured relatively higher for Korean coals. Therefore it can be predictable that the slagging and fouling formation has a little problem in a pulverized coal firing system. A base/acid ratio did show a good correlation with fusion temperature for these coal ashes.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.806-812
• /
• 2008

Many kinds of rolling-stocks that have various control methods are being operated by Seoulmetro which is a history of a city railroad rolling-stock. Seoulmetro is being faced with a wheel management comparing of other lines with a perpendicular wear of wheel and a side damage, and so on, by operating several cars at a loop line. This is causing maintenance expenses increase and deteriorating a fusibility of rolling-stock, for it has an effect on a rolling-stock using. A cutting pattern of wheel and a wear form affect the expected span of a wheel. A wheel cutting cause is classifed into cutting for reprofiling of a flange wear of wheel and for removing every kind defect which originates from wheel wear. In this study, Seoulmetro exhibit a stable rolling-stock use method and a reasonable management method of wheel, analysing wheel exchange condition and cutting management of wheel.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.269-274
• /
• 1999

Aluminum alloy has not only physical characteristic of very high activated high thermal conductivity and high thermal coefficient expansion but also special characteristic of great difference fusibility of hydrogen between liquid and solid phase. Because of these reasons, Aluminum welding is very different. Therefore, only MIG welding method should be applied instead of other welding methods. In this study, in order to select optimal welding conditions, it has been to investigate the effectiveness on the welding current, welding speed, flow rate of gas and welding voltage to occurrence of spatters, external shape of bead, state of penetration and width and hight of bead by using filer metal of A15356(dia. 1.21mm) on the base material of A16061.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.985-993
• /
• 1997

The effects of CaO and MgO fluxes on the fusibility of fly-ashes were investigated for two different fly-ashes. A fusion temperature of mixtures of selected fly-ashes and fluxes were measured by the ASTM test method(D1857) and the differential thermal analysis. IDT of these samples added CaO and MgO as a fluxing agent dropped in the range of 114 to $294^{\circ}C$ and 80 to $224^{\circ}C$, respectively. Compared with ash fusion temperature to Base/Acid ratio, the lowest ash fusion temperature were measured in the range of 0.7 to 0.8 for CaO-fly ash mixtures and 0.3 to 0.4 for MgO-fly ash mixtures. As a result, MgO in small addition acted as a more effective flux than CaO. A conventional Base/Acid ratio and liquidus point of ternary diagram did not show a good correlation with ash fusion temperature for these samples. In pure fusion temperature of fly ash-mixtures, DTA was better method than ASTM test method.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.319-335
• /
• 2013

Cloud computing allows users to access software or specific programs that support the cloud platform through an information communicating device that can connect to the internet anywhere or anytime. Also, the cloud architecture not only reduces the expenses of IT infrastructure construction and maintenance, but also speeds up processing and mobility, which leads to a significant ease of use. In spite of the advantages of cloud computing, previous studies have been centered on case studies of the execution, advantages, and problems of cloud computing. In contrast, empirical research on individual cloud computing up till now is very insufficient. Thus, the research aims to create a model of an individual user's perspective and verify validation. This study reveals types of influence that characteristics can have on an individual user's intention to use, by searching the characteristics that the individual user recognizes on cloud computing services. The results are as follows:first, the characteristics of cloud computing indicates a significant influence on usage intention. Second, all characteristics in cloud computing, accessibility, reliability, perceived ease of use, and fusibility, are confirmed in providing significant influences in shaping social influence forms. Third, social influence has a significant influence on usage intention.

• Journal of Korea Game Society
• /
• v.19 no.3
• /
• pp.5-14
• /
• 2019

The gaming server is based on a distributed server. In order to distribute workloads of gaming servers, distributed gaming servers apply some algorithms which divide each of gaming server's workload into balanced workload among the gaming servers and as a result, efficiently manage response time and fusibility of server requested by the clients. In this paper, we propose a load balancing agent using PPO(Proximal Policy Optimization) which is one of the methods from a greedy algorithm and Policy Gradient which is from Reinforcement Learning. The proposed load balancing agent is compared with the previous researches based on the simulation.

• Journal of the Korean Society for information Management
• /
• v.32 no.4
• /
• pp.167-203
• /
• 2015

This study tends to apprehend how much public library contributes to a role of upbuilder of digital integrated local society through a survey. For this, I performed the survey on 935 organization of public library in the whole country registered in national library statistical system. As a result, firstly, it's apprehended that equipment infra, Internet infra, etc like computer, laptop, scanner, tablet PC, etc are in relatively high level. Secondly, service or resource like electronic book, digital and virtual reference service, library service mobile App, etc that users can use are in relatively high level but software supporting cooperation and group task, fusibility of participating space, etc are shown very low level. Thirdly, the rate of literacy training relating to technology were only 22.4%, education subject focused on resource searching subject and somewhat future-oriented technical education like directions of video conference technique, cloud computing application education, etc wasn't conducted. Finally, we should consider expansion of providing technology and equipment and provision of future-oriented service and education according to a flow of the time that needs to seek change in various roles of library as enjoying culture space or creative space.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.399-407
• /
• 2014

Due to the increase of container terminals, as the volume of terminals become distributed, the competition of preserving existing volume and inviting new volume are becoming fierce, and various ways for processing terminal volume and inviting volume are being sought. Container terminal efforts to maximize efficiency in order to improve the volume handling capability and productivity by both expansion of the latest equipment and development of the latest terminal system. There are a variety of factors that influence the improvement of productivity at container terminals. Among them, in the case of yard transfer equipment, if it were to convert from the method of a Yard Tractor(YT) being fixed allocated to a certain Gantry Cranes(GC) to a Pooling System that processes in a method that properly distributes and allocates a Yard Tractor(YT) to multiple Gantry Cranes(GC), the terminal productivity and the fusibility of YT may be increased. The KPI which is an indicator for the productivity at container terminals is GC productivity and since GC productivity cannot exceed the speed of physical GC operations, a Pooling System is applied to increase productivity which its meaning and effect is massive. Here in the Report, we produce the Pooling Algorithm system to improve the efficiency of the transported equipments in container terminal which is actually applying for this method and have compared Non pooling system with Pooling system in the fields. By introducing a transfer equipment pooling system and enhancing the productivity compared to other terminals, it may become an essential factor for increasing the continuous service quality and profitability in terms of terminal business.