• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.363-368
• /
• 2020

The prosthesis of the implant installed in inappropriate positions presents aesthetic and functional problems. If the implants are placed in the wrong position, re-implantation is often limited. There are surgical and non-surgical methods for resolving complications without re-implantation. The surgical costs, healing time, discomfort and unpredictability make this choice unpopular. On the other hand, a gingival mask has the advantage of solving complications quickly and simply. The patient was a 80-year-old male with palatally installed implant in maxillary anterior region and dissatisfied with his unesthetic philtrum and food impaction between the upper lip and the prosthesis. It was difficult to predict the prognosis of surgical operation, and the patient wanted treatment economically and physically burdenless because of his age and financial situation. Thus, the gingival mask was planned and the results were satisfactory.

• Archives of Craniofacial Surgery
• /
• v.9 no.2
• /
• pp.77-80
• /
• 2008

Purpose: The majority of nasal fractures have been treated by closed reduction. And they were manipulated under local anesthesia or general anesthesia. Under the local anesthesia, patients can feel the pain and fear, so general anesthesia through the endotracheal intubation became popularized recently to treat the nasal fracture. But it has still the drawbacks of postanesthetic complication. Therefore, under the mask ventilation anesthesia using oral airway, we tried to manipulate the nasal fracture. Methods: From July 2007 to November 2007, we worked with fifty patients that were manipulated the nasal fracture. Fifty patients were divided into two groups, general anesthesia with the endotracheal intubation group(n=25) and the mask ventilation using oral airway group(n=25). We checked up the anesthesia time, postanesthetic complication, postoperative aesthetic & functional problem of nose in two groups. Results: In total operation time and sore throat frequency among the postoperative anesthetic complications, there was statistically significant difference between the mask ventilation group and the endotracheal intubation group(p<0.05). But there was no difference statistically in nausea frequency(p>0.05). And no patients complained of postoperative nasal complication such as septal deviation, septal perforation, nasal obstruction and hump nose in two groups. Conclusion: Through the mask ventilation using oral airway, we could reach satisfactory results in the anesthetic time and postanesthetic complication.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.5
• /
• pp.398-406
• /
• 1991

This paper presents a graphics accelerator for fast image generation. The accelarator has three major functional blocks: linear interpolator, multipliers and Edgee Painting Tree. Linear interpolator with coupled binary tree structure interpolates functional values of two end points. Two multipliers compute input values of interpolator in parallel. Mask pattern which removes out invalid data is generated by Edge Painting Tree. The proposed architecture in this paper is responsible for 64 pixels and can process about 5,900 10x10polygons per second.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.221-228
• /
• 2013

About functional parameters of a LED/UVLED (Light Emitting Diode/Ultra Violet LED), one of the most important parameters is the I-V characteristic. By researching factors affect to the I-V characteristic of uvled, we found that beside of the structure of the device itself, there is the influence of the electrode materials, electrode shapes, the process of wiring and packaging. In this work, we want to improve the performance of UVLED to find out the optimal mask design principles. The study is based on theoretical mathematical models, as well as the use of simulation software tool Comsol. From all results obtained, the team has improved mask design to manufacture electrodes for GaN-based UVLED. Electrode masks are designed by three softwares, which are Intellisuite, Klayout and AutoCad. Intellisuite masks would be used in fabrication simulation while Klayout and AutoCad are used to fabricate electrodes in experiments. As well as, we silmulated the structure of an uvled 355nm emission wavelength by TCAD software, in order to compare with uvled sample that has the same emission wavelength.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.18-25
• /
• 2008

The functional non-woven fabrics have been applied in various industry fields, such as clothing, hygiene, environment, medical and so forth. The functional non-woven fabrics were manufactured by meltblown and finishing processes. These functional non-woven fabrics were based on 5wt% masterbatch using 2,000ppm nano-silver resin composite. Silver is one of the most universal antimicrobial substances. Nano-technology enables us to expand the surface area of silver particles markedly. Silver nano particles were successfully produced less than 50nm in size. The functional non-woven fabrics including nano-silver particles showed excellent antibacterial activities against Staphylococcus aureus (ATCC 6538) and Klebsieila pneumoniae (ATCC 4352). From the results, functional non-woven fabrics including silver nano particels probably will be available as a good and safe antibiotic alternative, such as mask medium filter, water purifier filter, hygiene wet tissues, marine products pad and so forth.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.351-354
• /
• 2002

The F!T tube is a new type of CRT without a shadow mask. Correct color reproduction is performed by an electronic system that measures the landing positions of the electron beams and corrects through a dedicated deflection system. This paper describes in detail the position sensor and some of the electronics needed to build a functional control system. The principle has been shown in single- and triple-beam 17" and 32" tubes, of which results are included.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.62-69
• /
• 2018

In order to utilize health food chick bean as a raw material for cosmetics, the skin improvement effect of a mask pack made of chickpea Natto fermented with Bacillus subtilis Natto strain was studied. Powder obtained by lyophilization of chickpea Natto was applied to a facial mask pack as a paste formulation. This Natto pack was applied to subjects in their 50s and 60s to investigate their effect on skin improvement. As the number of treatments of Natto pack increased, the skin was improved and the improvement effect was remarkable after 4 treatments. After four times treatments, moisture content and sebaceous secretion increased by $8.4{\pm}3.6%p$ and $4.0{\pm}2.3%p$, respectively. Skin pores and wrinkles were also decreased by $1.8{\pm}0.3%p$ and $1.8{\pm}0.9%p$, respectively. Skin pigmentation decreased by $1.3{\pm}0.2%p$ and skin tone also increased from 55.2% to 55.9%. These results indicate that Natto product obtained by fermenting chickpea has the effect of improving skin such as moisturizing, pore, wrinkle, pigmentation, sebum secretion and skin tone, and can be used as a raw material for various functional cosmetics.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.509-526
• /
• 2016

Purpose: We would like to find the alternative method for the weathering test on rubber coated fabrics and adhesive-coated fabrics for the military products, KS M 0706 (Sunshine carbon arc) to KS M ISO 4892-2 (Xenon arc). Methods: We measured the tensile strength of adhesive-coated fabrics and adhesive products treated with sunshine carbon arc and xenon arc during 100, 150 and 200 hours, respectively. All of the results were treated with statistical test, ANOVA method. We also validate the surface modifications caused by treatment method and time by using FT-IR ATR and, SEM. Results: In case of the thick adhesive-coated fabrics (app. 1 mm), there was no distinctive difference on tensile strength by treatment method and time. In case of the thin mask hood (app. 0.22 mm) and TENT (app. 0.5 mm), there was distinctive difference on tensile strength. Especially, carbon arc showed a huge lowering properties. We could validate the curing from light and moisture, and the functional group change from cross-linking and oxidation using FT-IR ATR. In case of IBS, there was a surface cracks on SEM images. In case of mask hood, there was no distinctive differences, except for a particle falling from decreased affinity between rubber and particles caused by carbon arc. Conclusion: We concluded that there was no problems for changing xenon arc weathering test with same treatment time on IBS, KM7, K21 and adhesive products. In case of TENT and mask hood, there was a difference in tensile strength in accordance with the change of the treated time and method.

• Investigative Magnetic Resonance Imaging
• /
• v.9 no.2
• /
• pp.134-139
• /
• 2005

Purpose : To evaluate the usefulness of acoustic noise attenuator on auditory fMRI examination. Materials and methods : The acoustic noise attenuator consists of mask, earmuff and silicon earplug. The soft polyurethane sheet and polyurethane form , which has a good soundproof characteristic were used for mask and earmuff. Auditory fMRI experiments of 500 Hz pure tone stimulation were performed in three different cases; first all of mask, earmuff and earplug, secondly earmuff and earplug only and finally without attenuator in 4 normal hearing volunteers. For data acquisition, BOLD MR imaging technique was employed at a 1.5T MR scanner equipped with high performance gradient system. The raw data were analyzed using a SPM-99 analysis software and the activation maps were obtained. Results : In case of all items of acoustic attenuator used, the results revealed that activation was focused on primary auditory area. When only earmuff and earplug were used, the results showed that the activation spread over primary auditory and secondary associative areas. Last, when no device used, only weak activation was observed on the right auditory cortex. Conclusion : It is expected that the acoustic noise attenuator, which consists of earplugs, earmuffs and mask, is a very useful device in auditory fMRI study.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.20.1-20.6
• /
• 2016

Background: Most of cleft lip and palate patients have the esthetic and functional problems of midfacial deficiencies due to innate developmental tendency and scar tissues from repeated operations. In these cases, maxillary protraction is required for the harmonious facial esthetics and functional occlusion. Case presentation: A 7-year old boy had been diagnosed as severe maxillary constriction due to unilateral complete cleft lip and palate. The author tried to correct the secondary deformity by early distraction osteogenesis with the aim of avoiding marked psychological impact from peers of elementary school. From 1999 to 2006, repeated treatments, which consisted of Le Fort I osteotomy and face mask distraction, and complementary maxillary protraction using miniplates were performed including orthodontics. But, final facial profile was not satisfactory, which needs compromising surgery. Conclusions: The result of this study suggests that if early distraction treatment is performed before facial skeletal growth is completed, an orthognathic surgery or additional distraction may be needed later. Maxillofacial plastic and reconstructive surgeons should notify this point when they plan early distraction treatment for cleft maxillary deformity.