• 접착 및 계면
• /
• 제20권1호
• /
• pp.15-22
• /
• 2019

Polybutadiene diol (PBD)과 isophorone diisocyanate (IPDI)의 반응을 통하여 이관능 우레탄 아크릴레이트 올리고머 (PB-UAO)를 합성하고, 여기에 삼관능 아크릴레이트 모노머 (Tris(2- acryloyloxyethyl) isocyanurate (TAOEIC), 또는 Trimethylolpropane triacrylate (TMPTA) 또는 Pentaerythritol triacrylate(PETA)), 단관능 아크릴레이트 모노머 (Stearyl Acrylate) 그리고 광개시제를 혼합한 후 이형필름 위에 코팅하고 자외선 경화를 통하여 감압 점착 필름을 제조하였다. 삼관능 아크릴레이트 모노머의 구조 및 함량에 따른 감압 점착제의 박리강도, 인장강도, 신율, 열안정성 및 흡습 특성의 변화를 고찰하였다. 삼관능 아크릴레이트 모노머의 함량이 증가할수록, 그리고 분자량이 작을수록 감압 점착 필름의 박리강도, 연신율 및 흡습율은 감소하는 경향을 보였으며, 인장강도 및 열안정성은 증가하는 것을 확인하였다.

• 한국운동역학회지
• /
• 제26권1호
• /
• pp.115-126
• /
• 2016

Objective: The purpose of this study was to investigate plantar foot pressure and static balance according to the type of insole in the elderly. Methods: Thirteen elderly (mean age: $67.08{\pm}2.25years$, mean height: $159.63{\pm}9.64cm$, mean body weight: $61.48{\pm}9.06kg$) who had no previous injury experience in the lower limbs and a normal gait pattern participated in this study. Three models of insoles of the normal, 3D, and triangle types were selected for the test. The Pedar-X system and Pedar-X insoles, 3.3 km/h of walking speed, and a compilation of 20 steps walking stages were used to analyze foot-pressure distribution. Static balance test was conducted using Gaitview AFA-50, and balance (opening eyes, closing eyes) was inspected for 20 s. One-way ANOVA was conducted to test the significance of the results with the three insoles. p-value of less than .05 was considered statistically significant. Results: The mean foot pressure under the forefoot regions was the lowest with the 3D insole during treadmill walking (p<.05). The mean value under the midfoot was the highest with the 3D insole (left: p<.05, right: p<.01). The mean value under the rearfoot was the lowest with the 3D insole (p<.001). The maximum foot pressure value under the foot regions was the lowest on both sides of the forefoot with the 3D insole. A statistically significant difference was seen only in the left foot (p<.01). The maximum value under the midfoot was the highest with the 3D insole (p<.001). No statistically significant difference was detected on the values under the rearfoot. In the case of vertical ground reaction force (GRF), statistically significant difference was seen only in the left side rearfoot (p<.01). However, static balance values (ENV, REC, RMS, Total Length, Sway velocity, and Length/ENV) did not show significant differences by the type of insole. Conclusion: These results show that functional insoles can decrease plantar pressure and GRF under the forefoot and rearfoot. Moreover, functional insoles can dislodge the overload of the rearfoot and forefoot to the midfoot. However, functional insoles do not affect the static balance in the elderly.

• 한국운동역학회지
• /
• 제12권2호
• /
• pp.407-415
• /
• 2002

Athletic products must meet the needs of athletes and the demands imposed by sports through innovative design. These needs of athletes and requirements of sports are performance, protection and comfort related. In depth knowledge of anatomy and physiology, etiology of commonly reported injuries, and lower extremity mechanics form the basis of product creation/engineering. Game analysis which entails time and frequency surveys of the skills performed during a game, interviews with athletes and coaches, and discussions with medical staffs are used to identify the skills that are critical to the needs of athletes. In lab full biomechanical analyses of these skills and/or physiological responses of the athletes lead to clear functional criterions that serve as guidelines to be met by the design team. The concepts created by the design team are in turns subjected to the same battery of biomechanical analyses. The learning gathered through this pluridisciplinary process is used to further evolve design concepts. The evolution-testing loop is repeated until biomechanical and/or physiological, mechanical and perceptual tests indicate that the design concept meets the established functional design criterions. At that time, the design concepts is ready for manufacturing research and development. Additional biomechanical and physical tests are performed through that phase to confirm that the manufacturing processes preserve the functionality of the design concept. Durability and long term performance of production samples are evaluated through a final three month long weartest program. A rigorous research/testing program is crucial to create and engineer sport products that meet the performance, protection.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.441-446
• /
• 2005

Sole reconstruction should consider both functional and aesthetic aspects; durable weight bearing surface, adequate contour for normal footwear, protective sensation and solid anchoring to deep tissue to resist shearing. The anterolateral thigh perforator free flap has such favorable characteristics as long pedicle, reliable perforators and minimal donor site morbidity. This flap can be safely thinned to 3-4 mm. It can also be elevated with sufficient bulk with muscles like vastus lateralis for complex defect. Between June 2002 and December 2004, 48 cases of sole reconstruction were performed with anterolateral thigh perforator free flaps. Follow up period ranged from 4 to 34 months with a mean of 14.7 months and with exception of one case, all flaps survived. One case of total flap loss was noted due to infection in a patient who was administered lifetime immunosuppressant. Partial necroses developed in three cases but were treated conservatively. Satisfactory aesthetic and functional results were achieved and acceptable gait recovery was noted. Seventy-eight percent of the patients regained protective sensation by 6 months and earlier sensory recovery was noted in sensate flap group. The authors also present a standardized protocol for preoperative patient evaluation and postoperative management and rehabilitation.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.99-118
• /
• 2004

The aim of this study is to evaluate tennis shoes's plantar pressure distribution in tennis prayers and to determine the influence of the shoe on various tennis movements. When investigating the biomechanics of movement in tennis, one of the first things to do is to understand the movement patterns of the sport, specifically how these patterns relate to different tennis shoes. Once these patterns are understood, footwear company can design tennis shoes that match the individual needs of tennis players. Plantar pressure measurement is widely employed to study foot function, the mechanical pathogenesis for foot disease and as a diagnostic and outcome measurement tool for many performance. Measurements were taken of plantar pressure distribution across the foot and using F-Scan(Tekscan Inc.) systems respectively. The F-Scan system for dynamic in-shoe foot pressure measurements has enabled us to assess quantitatively the efficacy of different types of footwear in reducing foot pressures. The Tekscan F-Scan system consists of a flexible, 0.18mm thick sole-shape having 1260 pressure sensors, the sensor insole was trimmed to fit the subjects' right, left shoes. For this study 4 university male, high level tennis players were instructed to hit alternated forehand stroke, backhand stroke, forehand volley, backhand volley, smash, service movement in 4 different tennis shoes. 1. When impact in tennis movement, peak pressure distribution of landing foot displayed D>C>B>A, A displayed the best low pressure distribution. A style's tennis shoes will suggest prayer with high impact. If prayer with high impact feeling during pray in tennis wear A style, it will decrease injury, will have performance improvement. 2. When impact in tennis movement, plantar pattern of pressure distribution in landing foot displayed B>A>C>D in stability performance. During tennis, prayer want to stability movement suggest B style tennis shoes when tennis movement impact keep stability of human body. B style tennis shoes give performance improvement 3. When impact in tennis movement, plantar pattern of center of force(C.O.F.)trajectory in landing foot analyzed this : 1) When stroke movement and volley movement in tennis, prayer better to rearfoot movement. 2) when service movement, prayer midfoot strike movement. 3) when smash movement, prayer have forefoot strike movement.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.194-200
• /
• 2017

After the grafting of methacrylic acid (MA) to ethylene propylene diene monomer (EPDM), a new peak at $1704cm^{-1}$ corresponding to the carboxylic acid group was observed in the infrared (IR) spectrum. This characteristic MA molecule peak grew larger as the MA contents were increased. After casting films were prepared from pure EPDM and MA-grafted EPDM, differential scanning calorimeter (DSC) measurements were made the pure EPDM exhibited a melting point of approximately $45^{\circ}C$ while that of the MA-grafted EPDM was $135{\sim}140^{\circ}C$. As the graft ratio of MA increased, the absorbed heat capacity increased at temperatures near $135{\sim}140^{\circ}C$, indicating that an increased amount of MA reacted. Furthermore, owing to the addition of crystalline MA, it is expected that strength of the elastomer will improve as the graft ratio increases, as a result of the increased number of hard segments.

• 대한물리치료과학회지
• /
• 제11권4호
• /
• pp.29-37
• /
• 2004

Measurements of plantar pressure provide an indication of foot and ankle function during gait and other functional activities because the foot and ankle provide necessary support and flexibility for weight bearing and weight shifting while people are performing these activities. Plantar pressure is being increasingly used in both research and clinical practice to measure the effects of various footwear and physical therapy intervention. The influence of walking speed and ground inclination on plantar pressure parameters However has not been evaluated in detail. So, in this study to determine the effect of changes in walking speed and ground inclination on plantar pressure treadmills with different walking speeds and inclination were used. Plantar pressure parameters were measured with the Parotec system using the walking and running in 20 healthy participants(10 male, 10 female) aged $20{\sim}28$(mean 22.22, S.D.2.26 years) when slow walking and running. The result of this study with increased die walking speed, the peak pressure of 1st, 5th metatarsal head and total contact time and impulse total at the forefoot was affected by walking speed; however, die peak pressure, contact time and impulse total at the forefoot was not affected by ground inclination.

• 접착 및 계면
• /
• 제7권3호
• /
• pp.26-33
• /
• 2006

나일론 직물들이 전류세기 5, 10, 15, 20 A, 공급속도 5, 10, 15 m/min로 코로나 처리되었다. 나일론 직물의 표면변화를 X-ray 회절장치, 주사전자현미경(SEM)과 X-ray 광전자분석기(ESCALAB)로 확인하였다. 또한 물리적 성질의 변화를 인장 인열강도, 접착 및 습윤강도를 통하여 측정하였다. 접착에 사용된 접착제는 열경화성 반응형 폴리우레탄 핫 멜트 접착제이다. 대기압에서 코로나 방전처리에 의해 나일론 직물에 관능기들이 도입되어졌고, 그 결과 접착력은 향상되었다. 코로나 처리된 나일론 직물의 접착강도는 전류 세기가 증가할수록, 공급속도가 감소할수록 증가하였다.

• Nutrition Research and Practice
• /
• 제6권4호
• /
• pp.366-374
• /
• 2012

In order to create a worker-friendly environment for institutional foodservice, facilities operating with a dry kitchen system have been recommended. This study was designed to compare the work safety and work environment of foodservice between wet and dry kitchen systems. Data were obtained using questionnaires with a target group of 303 staff at 57 foodservice operations. Dry kitchen facilities were constructed after 2006, which had a higher construction cost and more finishing floors with anti-slip tiles, and in which employees more wore non-slip footwear than wet kitchen (76.7%). The kitchen temperature and muscular pain were the most frequently reported employees' discomfort factors in the two systems, and, in the wet kitchen, "noise of kitchen" was also frequently reported as a discomfort. Dietitian and employees rated the less slippery and slip related incidents in dry kitchens than those of wet kitchen. Fryer area, ware-washing area, and plate waste table were the slippery areas and the causes were different between the functional areas. The risk for current leakage was rated significantly higher in wet kitchens by dietitians. In addition, the ware-washing area was found to be where employees felt the highest risk of electrical shock. Muscular pain (72.2%), arthritis (39.1%), hard-of-hearing (46.6%) and psychological stress (47.0%) were experienced by employees more than once a month, particularly in the wet kitchen. In conclusion, the dry kitchen system was found to be more efficient for food and work safety because of its superior design and well managed practices.

• 복식문화연구
• /
• 제24권4호
• /
• pp.417-430
• /
• 2016

This study had two aims. First, the study intended to identify the influences of product benefits and product identification on consumers' purchase intention, Second, it wanted to assess the moderating effects of consumers' aesthetic seeking tendency on their decision-making process. Based on the stimulus-organism-response (S-O-R) paradigm and the product personality-brand identification-purchase intention model, this study proposed a research model, the benefits-product identification-purchase intention model. To test the model, a survey was conducted of female college students; a total of 298 questionnaires were analyzed. The stimulus used was a popular model of Nike running footwear: the Luna Eclipse+2. Factor analysis and structural equation analysis were conducted to analyze the research model. The results indicate : (1) The aesthetic benefit influenced product identification positively. The aesthetic benefit, functional benefit and product identification were all positively related to purchase intention. (2) The aesthetic seeking tendency mediated the influences of product benefits on consumers' purchase intention in the decision-making process. For consumers in the 'high' level group of aesthetic seeking tendency, aesthetic benefit and social benefit affected purchase intention and for consumers in the 'low' level group of aesthetic seeking tendency, the functional benefit only affected purchase intention. Based on this study, we find evidence that product benefits and aesthetic seeking tendency play important roles in consumers' decision-making process in product purchase.