• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.705-710
• /
• 2011

This paper proposes establishment of generator maintenance scheduling(GMS) considering minimization of $CO_2$ emissions. The objective function model to minimize $CO_2$ emissions is used in this paper. In this paper, and also, GMS is established due to freedom of GMS of generators owned by a designated generation company. The practicality and effectiveness of the proposed approach are demonstrated by simulation studies for a real size power system model in Korea in 2010.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.3-9
• /
• 2001

In this paper, a random number generator for simulation of speech-waveform coders was designed. A random number generator having a desired probability density function and a desired power spectral density is discussed and experimental results are presented. The technique is based on Sondhi algorithm which consists of a linear filter and a memoryless nonlinearity. Several methods of obtaining memoryless nonlinearities for some typical continuous distributions are discussed. Sondhi algorithm is analyzed in the time domain using the diagonal expansion of the bivariate Gaussian probability density function. It is shown that the Sondhi algorithm gives satisfactory results when the memoryless nonlinearity is given in an antisymmetric form as in uniform, Cauchy, binary and gamma distribution. It is shown that the Sondhi algorithm does not perform well when the corresponding memoryless nonlinearity cannot be obtained analytically as in Student-t and F distributions, and when the memoryless nonlinearity can not be expressed in an antisymmetric form as in chi-squared and lognormal distributions.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.693-696
• /
• 1999

This paper presents an analysis of the chaotic behavior in the discrete-time chaotic generator fabricated by CMOS technology. An approximated empirical equation is extracted from the measurement data of a nonlinear function block. Then the bifurcation diagram and Lyapunov exponent and time waveforms and frequency responses of the chaotic generator are calculated and simulated. And results of experiments in the chaotic circuit with the $\pm$2.5V power supply and clock rate of 10KHz are shown, and analysed.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.486-492
• /
• 2012

This paper presents a novel objective function for distribution system reconfiguration for reliability enhancement. When islanding operations of distributed generators is prohibited, faults in the feeder interrupt the operation of distributed generators. For this reason, we include the customer interruption cost as well as the distributed generator interruption cost in the objective function in the network reconfiguration algorithm. The network reconfiguration in which genetic algorithms are used is implemented by MATLAB. The effect of the proposed objective function in the network reconfiguration is analyzed and compared with existing objective functions through case studies. The network reconfiguration considering the proposed objective function is suitable for a distribution system that has a high penetration of distributed generators.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.191-198
• /
• 2014

This paper proposes a simple linear function approximation method to solve an economic load dispatch problem with complex non-smooth generating cost function. This algorithm approximates a non-smooth power cost function to a linear approximate function and subsequently shuts down a generator with the highest operating cost and reduces the power of generator with more generating cost in order to balance the generating power and demands. When applied to the most prevalent benchmark economic load dispatch cases, the proposed algorithm is found to dramatically reduce the power cost than does heuristic algorithm. Moreover, it has successfully obtained results similar to those obtained through a quadratic approximate function method.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.136-138
• /
• 2008

The output voltage of synchronous generator is regulated constantly by field current control in excitation system. Most of ship generator exciter system uses the thyristor phase controlled rectifier. However this rectifier is difficult to realize that the speed control system because its control period is slower than MOSFET and IGBT type converter. Therefore, this paper deals with PMG(Permanent Magnet Generator) type digital excitation system using MOSFET for ship synchronous generator. The organization of this excitation system is very simple. When the generator is under the short circuit accident, the output voltage becomes zero state and AVR can not operate. Thus generator requires the function for flowing output current through CBS. The performance of the proposed system is evaluated on a 10kVA experimental prototype circuit in place of real ship generator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1822-1828
• /
• 2008

This paper presents design parameter calculation methodology and its realization to construction for the 10/350${\mu}s$ lightning impulse current generator(ICG) modelled as double exponential function waveform with characteristic parameters ${\alpha},{\beta}$. Matlab internal function, "fzero" was applied to find ${\lambda}={\alpha}/{\beta}$ which is solution of nonlinear equation linearly related with two wave parameter $T_1$ and $T_2$. The calculation results for 10/350${\mu}s$ lightning impulse current show very good accuracy with error less 0.03%. Two type of 10/350${\mu}s$ ICGs based on the calculated design circuit parameters were fabricated by considering the load variation. One is applicable to the MOV based Surge protective device(SPD) for less 15 kA and the other is to test small resistive devices such as spark gap arrester and bonding device with maximum current capability 30 kA. The tested waveforms show error within 10% in comparison with the designed estimation and the waveform tolerance recommended in the IEC 61643-1 and IEC 60060-1.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1614-1616
• /
• 2000

The purpose of this study is to manufacture and test a thermoelectric generator which converts unused energy from close-at-hand sources, such as garbage incineration heat and industrial exhaust, to electricity. A manufacturing process and the properties of a thermoelectric generator are discussed before simulating the thermal stress and thermal properties of a thermoelectric module located between an aluminum tube and alumina plate. We can design the thermoelectric modules having the good properties of thermoelectric generation. Resistivity of thermoelectric module for thermoelectric generation consisting of 62 cells was $0.15{\sim}0.4{\Omega}$. The maximum power of thermoelectric generator using thermoelectric generating modules can be defined as temperature function, and in this case it can be analogized the linear relation between current and voltage characteristics as function of temperature. The thermoelectric generator using 128 generating modules was assembled with 4 parallel connected modules sets composed with 32 directly connected modules.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.136-142
• /
• 2005

This paper describes some major schemes for developing timing signal generator which can be used for testing of 3D radars. The developed generator has a function not only to simulate information on elevation angle for the simulated target signals but also to generate a modulated signal up to 80MHz. Because this generator has an internal modulating function instead of an external modulating function and has sufficient memory enough to change the parameters according to operating programs, it realization of various test-environments for testing a radar can be made with easy and with low expense.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.205-210
• /
• 2014

The micro grid considered in this paper consists of a diesel generator, a photovoltaic array, a wind turbine, a fuel cell, and a energy storage system. This paper explains and simulates the micro grid components in terms of accuracy and efficiency of having a system model based on the costs of fuel as well as operation and maintenance. For operational efficiency, the objective function in a diesel generator consists of the fuel cost function similar to the cost functions used for the conventional fossil-fuel generating plants. The wind turbine generator is modeled by the characteristics of variable output. The optimization is aimed at minimizing the cost function of the system while constraining it to meet the customer demand and safety of micro grid. The operating cost in fuel-cell system includes the fuel costs and the efficiency for fuel to generate electric power. To develop the overall system model gives a possibility to minimize of the total cost of micro grid. The application of optimal operation can save the interruption costs as well as the operating costs, and improve reliability index in micro grid.