• 공업화학
• /
• 제22권5호
• /
• pp.508-513
• /
• 2011

헴프(Hemp)는 빠른 성장과 재배가 용이한 특성을 가지고 있으며 전통적으로 인피(Bast)는 섬유산업에 이용되고 있다. 그러나 인피를 제외한 줄기(Stem)와 뿌리(Root)는 활용분야가 없어 대부분 부산물로서 폐기되고 있다. 이러한 헴프 부산물은 바이오-오일과 같은 바이오연료나 활성탄의 원료물질로 활용될 수 있다. 본 연구에서는 헴프 줄기, 뿌리 및 인피를 대상으로 열화학적 특성을 파악하였다. TGA를 이용해 열중량분석을 수행한 결과 헴프 부산물들의 분해영역은 대부분 $270{\sim}370^{\circ}C$ 라는 것을 확인하였다. TGA 분석으로부터 얻은 실험데이터는 미분법을 적용하여 전화율 변화에 따라 활성화에너지와 전지수인자를 계산하였다. 열분해반응에서 활성화에너지는 전화율 증가에 따라 증가하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권1호
• /
• pp.8-14
• /
• 2017

2008년 금융위기로 인하여 세계 경제가 어려워지면서 국제 유가 상승과 물동량이 감소하였으며, 대다수의 대형선사들은 차선책으로 대형선박 발주, 항로변경 및 운항방식 등을 개선하여 적자폭을 줄이게 되었다. 특히, 저속 운항 방식은 눈에 띄는 연료비 절감으로 많은 선주사들로부터 호응을 얻었으나 장기간 저속 운전시 고속 운전에 최적화된 주기관의 재킷 청수 냉각시스템은 정상 운전온도를 유지하지 못하고 하강하여 저온부식의 발생을 가속화 하게 되었다. 이로 인해 엔진의 부하가 낮을 경우 기존에 설치되는 재킷 냉각수 냉각기의 역할은 감소하고 조수기의 사용도 제한이 됨으로 재킷 청수 냉각 시스템의 개선이 필요하게 되었다. 본 논문에서는 선박의 저속운항에 따른 선박용 디젤 주기관의 냉각시스템 개선 사항을 검토하기 위하여, 파나막스급 산적화물선인 82k와 케이프급 산적화물선 180k 선박들을 대상으로 주기관 재킷 냉각수 냉각기를 설치 및 미설치하여 주기관 청수 냉각 시스템의 성능 결과를 검토 및 비교 분석 하여, 현 저속 운항선박에 탑재되는 주기관의 성능변화에 적절한 냉각시스템의 설계 개선방안을 제안하였다.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.590-596
• /
• 2019

산업이 발달함에 따라 석탄, 석유등 화석연료의 사용이 증대되고 있다. 그 결과 온실가스의 증가와 더불어 이상기후 등의 문제가 발생하게 되었다. 이로 인해 주 자원을 대체 할 수 있는 친환경적인 신재생에너지에 관한 연구가 활발히 진행 중이며, 그 중 열효율이 높은 우드펠릿이 화력발전소, 가스보일러 등에서 대체연료로서 각광받고 있다. 그러나, 우드펠릿의 사용량은 꾸준히 증대 되고 있는 반면 우드펠릿의 사용 시 발생할 수 있는 화재 및 자연발화 등의 위험성에 대한 선행연구가 부족한 실정이다. 이에 본 연구에서는 길이 20 cm, 높이 20 cm, 두께 14 cm의 시료용기를 사용하여 항온조 내부 유량변화에 따른 우드펠릿 최소자연발화온도와 발화한계온도를 구하여 발화특성을 예측하였다. 그 결과 유량이 0 NL/min일 때 $153^{\circ}C$에서 주위온도보다 시료의 중심온도가 상승하여 발화하였고 이때의 발화한계온도는 $152.5^{\circ}C$를 구하였으며, 유량이 0.5 NL/min, 1.0 NL/min에서 발화한계온도인 $149.5^{\circ}C$를 구하였다. 또한 유량이 1.5 NL/min일 때 발화한계온도인 $147.5^{\circ}C$를 구하였으며, 동일한 저장량에서 유량이 증가할수록 발화한계온도가 낮아지는 결과를 도출하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권4호
• /
• pp.62-68
• /
• 2008

본 연구에서는 토양 이송 장치, 로터리킬른, RTO, 사이클론 및 백필터 등으로 구성되어 있고 이동이 가능한 저온열탈착 장치를 제작하여 현장유류오염토양의 처리시험을 수행하였다. 제작된 열탈착장치는 LPG를 연료로 사용하고 배출되는 가스를 RTO를 통하여 재순환하는 방식을 적용하여 경제적인 운전이 가능하도록 하였다. 장치의 현장시험을 위하여 경유와 $C_30$ 이상의 heavy oil로 혼합 오염된 현장토양(2,690 mg TPH/kg soil) 을 먼저 선별기를 통해 50 mm 이하의 입경을 가진 토양으로 채 분리한 후, LTTD 장치의 로터리킬른에 체류시간 15분 조건에서 시간당 7$m^3$의 양으로 투입하였다. 열탈착장치의 온도를 각각 평균 $567^{\circ}C$와$692^{\circ}C$로 조정한 후 오염토양의 정화 운전을 수행한 결과, 배출되는 정화토양의 TPH 농도는 각각 46 mg/kg과 32 mg/kg로서 각각 평균 98.3과 98.9%의 높은 정화 효율을 얻을 수 있었다.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.190-190
• /
• 2011

In South Korea the gross generation and heated effluent of power generation plant was 259 TWh and 4.73 billion tons in 2008. And then the waste heat from power generation was 388 TWh. It shows that the efficiency of thermal power generation plant is about 40%. Therefore to reduce $CO_2$ emission from thermal power generation plant, the energy of this heated effluent must be reused to heat buildings or farm facilities. In South Korea horticultural facilities of about 25% are heated in winter season. Total area of greenhouses which are heated is about 13,000 ha. Total heat amount needed to warm greenhouse of 13,000 ha in winter season is only 3.4% of total waste heat from power generation plant. In this study a heat pump system was designed to reuse the waste heat from power generation. Especially new heat exchanger was developed to recover the thermal energy from waste water and this model considered anti-corrosion against sea water and low cost for economic feasibility. This heat recovery system was installed in mango growing greenhouse around thermal power generation plant in Seogwipo-city, Jeju Special Self-Governing Province. The result of preliminary test shows that the heating cost of about 90% is saved as compared to boiler using tax free light oil as a fuel.

• Journal of Nutrition and Health
• /
• 제14권1호
• /
• pp.1-8
• /
• 1981

The purpose of this nutritional survey on the actual conditions of group feeding is to be of value for promoting the health of the blue collar workers through consice understanding of food intake trends in businesses as well as realizing our desirable target. The results of the survey are summarized as follow. 1, Status of food economics 1) The average feeding cost amounts to 453 won per day per person. 2) The average school years of food buyers were 12.3 years, cookers were 12.0 years and dieticians were 14.5 years. 3) Kerosene(57.6%), gas(24.2%), electric(12. 1%) and cool briguette(6.1%) were used for fuel. 2. Status of food intake The average food intake per person per day in surveyed businesses was 1193.4g. The total intake of food was consisted of 42% grains, 40.4% vegetables, 4.7% legumes, 4.5% fish and shellfish, 4.0% potatoes, 1.6% meats, 1.0% seasonings. 0.8% eggs, 0.5% sea weeds, 0.3% oil and fats, 0.1% sugar. These findings led us to the conclusion that workers in the surveyed businesses retied heavily on plant foods. 3. Status of nutrient intakes 1) The average intake of calorie was 2752.6 kcal per day, which was slightly higher than 2,700 kcal of RDA. Though the quantity was above the level of RDA, it was largely from plant foods. 2) The average intake of protein was 84.7g per day, which was slightly higher than 80g of RDA. 3) The average intake of fat was 26g per day, which was much lower than 36g of RDA. 4) The averse intake of calcium was 532.3mg per day, which was lower than 600mg of RDA. 5) The average iron intake was 9.8mg per day, which was much lower than 10mg of RDA and 18mg of HDA for women. 6) Intakes of vitamin group were high. Especially, intake of vitamin A was 2-3 times higher than RDA and intake of vitamin C and niacin were 2 times higher than RDA.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.248-257
• /
• 2020

This study presents an initial design for a novel system consisting in a coupled nuclear reactor and a phase change material-based thermal energy storage (TES) component, which acts as a buffer and regulator of heat transfer between the primary and secondary loops. The goal of this concept is to enhance the capacity factor of nuclear power plants (NPPs) in the case of high integration of renewable energy sources into the electric grid. Hence, this system could support in elevating the economics of NPPs in current competitive markets, especially with subsidized solar and wind energy sources, and relatively low oil and gas prices. Furthermore, utilizing a prismatic-core advanced high temperature reactor (PAHTR) cooled by a molten salt with a high melting point, have the potential in increasing the system efficiency due to its high operating temperature, and providing the baseline requirements for coupling other process heat applications. The present research studies the neutronics and thermal hydraulics (TH) of the PAHTR as well as TH calculations for the TES which consists of 300 blocks with a total heat storage capacity of 150 MWd. SERPENT Monte Carlo and MCNP5 codes carried out the neutronics analysis of the PAHTR which is sized to have a 5-year refueling cycle and rated power of 300 MW_th. The PAHTR has 10 metric tons of heavy metal with 19.75 wt% enriched UO₂ TRISO fuel, a hot clean excess reactivity and shutdown margin of $33.70 and -$115.68; respectively, negative temperature feedback coefficients, and an axial flux peaking factor of 1.68. Star-CCM + code predicted the correct convective heat transfer coefficient variations for both the reactor and the storage. TH analysis results show that the flow in the primary loop (in the reactor and TES) remains in the developing mixed convection regime while it reaches a fully developed flow in the secondary loop.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.1016-1022
• /
• 2010

액상 중유 연료를 사용하는 고용량 증기 보일러에서 발생되어 연소기기 내부에 침적되는 슈트, 슬래그, 크랭커, 회분, 산화물의 on-line 세정을 위한 세정제 제조에 대한 연구를 수행하였다. 액상 중유 연료를 사용하는 보일러 및 가열로에 생성되는 슈트, 슬래그, 크랭커, 회분, 산화물을 제거하는 기존 기술은 보일러 및 가열로의 가동 중단 후 작업자들에 의한 기계적인 처리를 통하여 침적물을 제거하는 기술을 사용하고 있다. 기존 기술을 대치할 수 있고 보일러의 중단이 없는 상태에서 침적물을 세정할 수 있는 세정제의 최적 조성을 도출하였다. 질산암모늄과 질산마그네슘의 혼합물이 주 세정제로 도출되었으며, 각종 전이금속 화합물에 의한 영향을 영향을 연구하여, 세정에 의한 부식을 방지할 수 있으며, 연소효율의 증대를 얻을 수 있는 전이금속화합불 첨가제를 도출하였다.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1123-1132
• /
• 1996

It has been reported that high temperature structural components represent the phenomenon of material degradation according to a long term service under high temperature and pressure. Especially, fossile power plant components using the fossil fuel and heavy oil are affected by dewpoint corrosion of $H_2SO_4$produced during a combustion. Therefore, the service materials subjected to high temperature and pressure may occur the stress corrosion cracking. The object of this paper is to investigate SCC susceptibility according to the material degradation of the high temperature structural materials in dewpoint corrosive environment-$H_2SO_4$.The obtained results are summarized as follows : 1) In case of secondary superheater tube, the fractograph of dimple is observed at the concentration of $H_2SO_4$-5%. When the concentration of $H_2SO_4$ is above 10%, the fracture mode is shifted from a transgranular fracture to an quasi-intergranular fracture according to the increment of concentration. 2) In the relationship between [$\Delta$DBTT]$_sp$ and SCC susceptibility, it is confirmed that the greater material degradation degree is, the higher SCC susceptibility is. In addition, it can be known that SP test is useful test method to evaluate SCC susceptibility for high temperature structural components. 3) When [$\Delta$DBTT]$_sp$ is above 17$17^{\circ}C$ the SCC fracture behavior is definitely observed with SCC susceptibility of above 0.4.