• Journal of Forest and Environmental Science
• /
• v.36 no.4
• /
• pp.298-310
• /
• 2020

Fuel management can play enormous role in fire management in tropical dry forests. However, unlike the temperate forests, knowledge on implications of different fuel management methods in tropical forests is often inadequate. In this study, the implications of prescribed burning and hand thinning treatments on implementation cost, fuel loading and post-treatment fire behaviour were tested and compared in degraded forests and teak plantations in two forest reserves of different levels of dryness in Ghana. The study found that prescribed burning was less expensive (62.02 US Dollars ha-1) than hand thinning (95.37 US Dollars ha-1). The study also indicated that the two fuel management methods were able to reduce fuel loading in degraded forests and teak plantations. However, prescribed burning was more effective in reducing fuel loading than hand thinning. While the relative change of fuel reduction was 13% higher in prescribed burning than the hand thinning in degraded forest, it was 41% higher in prescribed burning than hand thinning in teak plantations. The fire behaviour of post-treatment experimental fire was also lower in prescribed burning than the hand thinning and control plots. Fuel management, therefore, has a great potential in fire management in degraded forests and teak plantations in Ghana.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.11-18
• /
• 2023

The architecture of the Fuel Thermal Management System (FTMS) in a commercial aircraft engine was built to model and simulate the fuel system. The study shows the thermal interactions between the fuel and engine lubrication oil through the mission profile of a high bypass ratio, two-spool turbofan engine. Fuel temperature was monitored as it flowed through each sub-component of the fuel system during the mission. The heat load in the fuel system strongly depended on the fuel flow rate, and was significantly increased for the periods of cruise and descent with decrease of fuel flow rate, rather than for the periods of take-off. Due to the thermal interaction in the pump housing, the fuel temperature at the outlet of the low-pressure pump was increased (4.0, 9.2, and 30.0) % over the case without thermal interaction for take-off, cruise, and descent, respectively.

• Tribology and Lubricants
• /
• v.27 no.2
• /
• pp.109-114
• /
• 2011

The low temperature characteristics of automotive diesel have been legally regulated due to the fact that solid particle in diesel at low temperature can cause severe problems in the vehicle. The biodiesel is well known for eco-friendly fuel, which is one of the most popular alternative petrodiesel, but it is easy to solidified at low temperature than petrodiesel at low temperature. For that reason, in this study, we investigated the low temperature fuel characteristics of diesel-biodiesel blends which were prepared to mix 6 different kinds of biodiesel to winter diesel fuel, respectively. Also, we confirmed to improve low temperature fuel characteristics by pour point depressant.

• Nuclear Engineering and Technology
• /
• v.12 no.3
• /
• pp.194-213
• /
• 1980

The paper describes and quantifies the wastes arising in the nuclear fuel cycle for Light Water Reactors, Heavy Water Reactors and Fast Breeder Reactors. The management and disposal technologies are indicated, together with their environmental impacts. Both once-through and uranium-plutonium recycle systems are evaluated, and comparisons are made on the basis of tingle reference technologies for waste management, and for one gigawatt/year of electricity generation. Environmental impacts are assessed, particularly that of health and safety, and a reference costing system is applied purely as a basis for comparing the fuel cycles. From this study it call be concluded generally that the relative differences of the impacts of waste management and disposal between the selected fuel cycles are not decisive factors in choosing a fuel cycle. Employing the technologies assumed, the radioactive wastes from any of the fuel cycles studied can be managed and disposed of with a high degree of safety and without undue risk to man or the environment. The cost of waste management and disposal is only a few percent of the value of the electricity generated and does not vary greatly between fuel cycles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.103-108
• /
• 2012

Fuel economy is an important factor in a vehicle owing to recent energy supply and environmental problems. This paper deals with fuel cell hybrid vehicles (FCHVs) and introduces a fuel economy evaluation method. The fuel economy of an FCHV depends on its power management strategy. Two rule-based power management strategies are applied to this paper and their fuel economy is evaluated based on the optimal control theory. The concept of the optimal line is also applied to this paper, which is used to compare the fuel consumption of a power management strategy to the optimal result. The two rule-based strategies are also compared to each other.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.12
• /
• pp.713-715
• /
• 2005

The work in this paper presents development of fuzzy logic-based energy management strategy for a fuel cell hybrid electric vehicle. In order for the fuel cell system to overcome the inherent limitation such as slow response time and low fuel economy especially at the low power region, the battery system has come to compensate for the fuel cell system. This type of hybrid configuration has many advantages, however, the energy management strategy between power sources is essentially required. For the optimal power distribution between the fuel cell system and the battery system, a fuzzy logic-based energy management strategy is proposed. In order to show the validity and the robustness of suggested strategy, some simulations are performed for the standard drive cycles.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.511-513
• /
• 2005

The fuel cell system has inherent limitation such as slow response time and low fuel economy especially at the low power region, and thus, the battery system has come to be used to compensate for the fuel cell system. This type of hybrid configuration has many advantages, however, the energy management strategy is essentially required. The work in this paper presents survey on recent power management strategies for fuel cell hybrid electric vehicles. For three power management strategies: basic control method. object function-based control method, and fuzzy logic-based control method. each strategy is reviewed and discussed with other strategy.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2641-2649
• /
• 2024

Effective management of slightly used nuclear fuel (SUNF) is crucial for both technical and public acceptance reasons. SUNF management, radiotoxicity risk, and associated financial investment and technological capabilities are major concerns in nuclear power production. Reducing the volume of SUNF can simplify its management, and one possible solution is utilizing small modular reactors (SMR) and advanced fuel designs like those with thorium. This research focuses on studying the neutronic performance and radionuclide inventory of three different thorium fuel configurations. The mass of fissile material in thorium-based fuel significantly impacts Kinf, burn-up, and neutron energy spectrum. Compared to uranium, thorium as a fuel produces far fewer transuranic elements and less long-lived fission products (LLFPs) at the end of the core cycle (EOC). However, certain fission product elements produced from thorium-based fuel exhibit higher radioactivity at the beginning of the core cycle (BOC). Physical separation of thorium and uranium in the fuel block, like seed-and-blanket units (SBU) and duplex fuel designs, generate less radioactive waste with lower radioactivity and longer cycle lengths than homogeneous or mixed thorium-uranium fuel. Furthermore, the SBU and duplex feel designs exhibit comparable neutron spectra, leading to negligible differences in SUNF production between the two.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1071-1072
• /
• 2012

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.2
• /
• pp.26-33
• /
• 2017

Pyro project, one of complex project, is now under research and development. To manage this kind project successfully, it is essential to apply the processes of technical management (TM) based on systems engineering (SE) and project management (PM). In this paper, the project management processes from ISO-21500 standard, PMBOK guide, and PRINCE2 guide were reviewed, and then some common PM for the large national R&D project were selected. An integrated technical management and project management frame work was finally established and suggested for Pyro project.