• 한국지반공학회논문집
• /
• 제30권9호
• /
• pp.57-66
• /
• 2014

동토지역에서는 계절변화에 상관없이 항시 영하상태로 동결되어 있는 영구동토층과, 그 위로 동결융해가 반복되는 활동층으로 구성되어있다. 일반적으로 대기온도 변화에 따라 동결융해가 반복되는 활동층은 얼음과 물의 상변화 작용이 반복되기 때문에 지반의 융기현상과 침하현상, 그리고 영구동토층의 온도상승을 초래할 수 있다. 열사이펀이란 구조체 내부에 충전된 냉매의 자가적인 열순환을 이용하여 지반의 온도를 영하상태로 제어하는 지반 안정화 공법 중 하나이다. 열사이펀은 대기중에 냉매의 열을 방출하는 응축부와 지중에 열을 흡수하는 증발부로 구성되어 있으며 대기의 온도가 영하의 상태일 때 지반의 온도를 영하상태로 제어한다. 본 연구에서는 열사이펀의 지반 열전달성능을 분석하기 위해 모형지반에 단열재를 배치하여 열사이펀을 통한 지반동결실험을 수행하였다. 단열재의 열차단성 및 열사이펀 길이를 고려하여 단열재 및 열사이펀의 성능실험을 수행하였으며, 실험에서 얻어진 물성치를 상용수치해석 프로그램인 TEMP/W에 반영하였다. 본 연구에서 제시된 실내실험과 수치해석 방법을 통해 열사이펀의 열성능을 산정할 수 있었다.

• 한국식품과학회지
• /
• 제25권4호
• /
• pp.313-320
• /
• 1993

동결건조에서 승화 건조시간을 예측하기 위하여 수학적 모델링과 지배방정식을 설정하고, 당근즙을 대상으로 수치계산하여 실험값과 비교한 바, 수분함량이 많은 동결건조품에서 단위면적당 승화량을 높일 수 있는 재료의 두께는 전도 열전달 방식에서 5mm이었으며, 양면 복사방식에서는 10mm이었다. 또한 동일한 압력에서 응축기 온도가 낮을수록 당근즙의 승화시간은 짧았고, 압력이 높을수록 승화시간은 선형적으로 증가하였다. 그리고 동결건조 효율이 가장 좋은 열전달 방법으로는 전도 및 복사방식으로 상, 하의 플레이트 온도를 $T_x{\leq}T_m$와 $T_m{\leq}T_x$의 제한 조건하에서도 별도 제어하는 방식이었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.45-54
• /
• 2012

In order to predict trailing edge noise from a flat plate more effectively and accurately, the prediction algorithm based on semi-analytic model for point pressure spectrum is proposed. The semi-analytic model consists of empirical models for point pressure spectra and theoretical model to determine the boundary layer characteristics needed for the empirical models. The proposed methods are applied to predict the trailing edge noise of the flat plate located in the mean flow of speed 38 m/s, for which the measured data are available. In present study, six empirical models for point pressure spectra are utilized for the predictions of trailing edge noise and their prediction results are compared to the measured data. Through the analysis of these comparisons, it is revealed that the present method based on non-frozen formula using Efimtsov model and Smol'yakov-Tkachenko model can provide more accurate and efficient predictions of trailing edge noise.

• 설비공학논문집
• /
• 제23권3호
• /
• pp.173-178
• /
• 2011

Gas diffusion layer(GDL) in PEMFC performs the discharge of water vapor smoothly. When GDL is revealed to cold environment, the freezing of the water droplet or water net in GDL occurs. The purpose of this work is to observe the cooling and freezing behavior of the water droplet which meets to the microporous surface and air under the various low temperature conditions. GDL was coated with waterproof material, which has three types of coating rate, 0, 40 and 60%. Water droplets in series of sizes on GDL were supercooled, frozen and crystalized orderly by circulating low temperature brine. The process of cooling was investigated with the temperature and the snapshot of the water droplet.

• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.524-534
• /
• 2012

In order to predict trailing edge noise from a flat plate more effectively and accurately, the prediction algorithm based on semi-analytic model for point pressure spectrum is proposed. The semi-analytic model consists of empirical models for point pressure spectra and theoretical model to determine the boundary layer characteristics needed for the empirical models. The proposed methods are applied to predict the trailing edge noise of the flat plate located in the mean flow of speed 38 m/s, for which the measured data are available. In present study, six empirical models for point pressure spectra are utilized for the predictions of trailing edge noise and their prediction results are compared to the measured data. Through the analysis of these comparisons, it is revealed that the present method based on non-frozen formula using Efimtsov model and Smol'yakov-Tkachenko model can provide more accurate and efficient predictions of trailing edge noise.

• 한국수산과학회지
• /
• 제12권4호
• /
• pp.235-240
• /
• 1979

krill을 식용화하기 위한 한 방법으로서 paste상 및 분말상의 krill soluble을 가공하고 제품의 구성아미노산 및 유리아미노 리의 조성을 검토하였다. 생동결 krill, 자가소화 및 $0.2\%$의 pronase-p의 첨가후의 가수분해에 의한 paste상과 분말상의 krill solube의 구성아미노산 중에는 glutamic acid, lysinge 및 aspartic acid가 가장 많았으며, cystine과 histidine이 가장 적었다. 생동결 krill의 유리아미노산중에는 lysine, arginine, proline, glycine, alanine 및 leucine이 가장 많았으며, cystine과 histidine 그리고 구성아미노산에서 그 함량이 많던 glutamic acid와 aspartic acid가 가장 적었다. 자가소화에 의한 paste상의 krill soluble의 유리아미노산에서는 생동결 krill에서 보다 glutamin acid, serine threonine, isoleucine, aspartic acid, valine 등의 량이 많아졌으며, 특히 glutamic acid는 거의 40배정도로 증가하였다. 전체적으로는 lysine, leucine, threonine 및 alanine 등이 많았으며 cystine, aspartic acid 및 histidine의 량이 적었다. $0.2\%$의 pronase-p를 첨가하여 가수분해한 paste상의 krill soluble 유리아미노산에는 aspartic acid와 glutamic acid이 량이 자가소화시보다 월등히 큰 증가폭을 보였으며 전체적으로는 lysine, leucine, arginine, alanine 및 proline이 많았으며 cystine, histidine, serine 등의 량이 적었다. 생동결 krill 및 drill soluble의 필수아미노산은 함량면에서 달걀과 비교하여 손색이 없었다.

• 한국전산유체공학회지
• /
• 제8권4호
• /
• pp.34-40
• /
• 2003

The effect of nose radius on aerodynamic heating is investigated by using the Navier-Stokes code extended to thermochemical nonequilibrium airflow, Spherical blunt bodies, whose nose radius varies from 0.O03048 m to 0.6096 m, flying at Mach 25 at an altitude of 53.34 km are considered. Comparison of heat flux at stagnation point with the solution of Viscous Shock Layer and Fay-Riddell are made. Results show that the flow for very small radius is in a nearly frozen state, and therefore the heat flux due to diffusion is smaller than that due to translational energy. As the radius becomes larger, the portion of heat flux by diffusion becomes greater than that of heat flux by translational temperature and approaches to a constant value.

• 소성∙가공
• /
• 제15권1호
• /
• pp.15-20
• /
• 2006

The rapid thermal response (RTR) molding is a novel process developed to raise the temperature of mold surface rapidly to the polymer melt temperature prior to the injection stage and then cool rapidly to the ejection temperature. The resulting filling process is achieved inside a hot mold cavity by prohibiting formation of frozen layer so as to enable thin wall injection molding without filling difficulty. The present work covers flow simulation of thin wall injection molding using the RTR molding process. In order to take into account the effects of thermal boundary conditions of the RTR mold, coupled analysis with transient heat transfer simulation is suggested and compared with conventional isothermal analysis. The proposed coupled simulation approach based on solid elements provides reliable thin wall flow estimation for both the conventional molding and the RTR molding processes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.443-450
• /
• 2009

This study has dealt with the ice making characteristics in a rectangular vessel cooled from below direction with experiment and numerical analysis. The experiment and numerical analysis were carried out under the following conditions which are the cooling wall temperatures of -5[$^{\circ}C$], -10[$^{\circ}C$], and -15[$^{\circ}C$]. The temperature profile of non-frozen layer was calculated by numerical analysis as the form of non-dimensional temperature. From this study, it is cleared that the existence of natural convection is clearly known. And also the non-dimensional freezing amount was derived from experimental result. This correlation equation will give a useful information to the designers of ice making system.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.64-70
• /
• 1999

Family injection molding of plastic is widely used to enhance productivity. Runners for molded products in fami-ly injection molding have to be balanced so that each of the producs is filled completely at the same time,. In this study computer simulations were performed to determine balanced circular section runners in family injection molding with two cavities where each of he cavity shapes is like a case. It was found from the computer simula-tions that runner balance could be fulfilled only by modifying runner diameters. But in order to get more quality molded products other process factors such as flow length flow resistance shapes of products and etc, should be taken in to consideration for the design of a family injection molding process.