• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제27권5호
• /
• pp.572-582
• /
• 1994

To investigate water mass structure and DO(Dissolved Oxygen) distribution in Chinhae Bay, temperature, salinity and DO were observed in the bay in summer and winter from 1990 to 1993, and two-dimensional tidal current and parameter log($H/U^3$) were computed. Shallow water fronts in the bay were formed in summer in Kaduk channel and the central part of the bay having log($H/U^3$) values of $2.0{\sim}2.5$. Oxygen deficiency at the bottom layer in summer occurred in the western and northern part of the bay with weak tidal current, where the value of log($H/U^3$) was more than about 3.5 and $M_2$ tidal current was less than about 20 cm/s. DO concentration at the bottom layer of Kaduk channel and the central channel of the bay having the strong tidal current was more than about 3.5 mg/l. The isolines of DO concentration were nearly parallel to the isovelocity, and the concentrations correlated with the frontal location. The frontal location and DO distribution were influenced by tidal range, river inflow and meteorological conditions, and also correlated with bottom slope characteristics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제16권2호
• /
• pp.51-58
• /
• 1983

Off the southwest coast of Korea, changes in hydrographic fields from stratified state of summer to a vertically homogeneous one of winter appeared to occur most actively in November. During this transitional period coincident thermal and salinity fronts are formed along the boundary between the two water masses of cold coastal water with low salinity and of the Tsushima Current Water. Generally frontal zone lies where the bottom depth is about 70-90m except for the central region of the Cheju Strait in which the influence of the Tsushima Current is weak. Result of the drift bottle experiment in November 1930 supports the existence of the westward coastal current.

• The Bulletin of The Korean Astronomical Society
• /
• 제38권1호
• /
• pp.46.2-46.2
• /
• 2013

The neutral component of the interstellar medium (ISM) is segregated into the cold neutral medium (CNM) and warm neutral medium (WNM) as a result of thermal instability. It was found that the CNM--WNM evaporation interface, across which the CNM undergoes thermal expansion, is linearly unstable to corrugational disturbances, in complete analogy with the Darrieus-Landau instability (DLI) in terrestrial flames. To explore dynamical consequences of the DLI in the ISM, we perform a linear stability analysis of the DLI including the effect of thermal conduction as well as nonlinear hydrodynamic simulations. We find that the DLI is suppressed at short length scales via heat transport. The linear growth time of the fastest growing mode is proportional to the square of the evaporation flow speed of the CNM relative to the interface and is typically >10 Myr. In the nonlinear stage, perturbations grow into cusp-like structure protruding toward the WNM, and soon reach a steady state where the evaporation rate is increased by a factor of 2 compared to the initial state. We demonstrate that the amplitude of the interface distortion and enhancement in evaporation rate are determined primarily by the density ratio between the CNM and WNM. Given quite a long growth time and highly subsonic velocities at saturation, the DLI is unlikely to play an important role in the ISM dynamics.

• Journal of the Korean Society of Costume
• /
• 제61권7호
• /
• pp.17-34
• /
• 2011

This study examined how Bangryeong(方領) had been changed from ancient times in China to the Joseon dynasty[朝鮮] in Korea by analyzing Bangryeong in literature, relics, paintings, etc. Based on this, we also analyzed the form of Bangryeong itself and clothes with Bangryeong using excavated relics from the Joseon dynasty. First, from early Chinese literature, it was confirmed that meaning of "Bangryeong" was a collar attached straight to a garment so that if the garment is put on with the fronts intercrossed with each other the back neck part of the collar is naturally squared. Second, from literature in the Joseon dynasty, it was confirmed that the meanings and forms of Bangryeong were diversified and had different characteristics throughout different time periods. Different from its original meaning in China, Bangryeong came to mean an intentionally designed square shape. Third, Bangryeong from the Yuan(燕) and Ming(明) Dynasties were found among relics excavated in China. Bangryeong from Yuan was Cheolik[帖裏] worn by men, and Bangryeong from Ming was found in women's dresses. Fourth, Bangryeong relics from the Joseon dynasty examines its form in detail. Bangryeong was found in various forms of clothes, and this was consistent with findings from literature review.

• Journal of computational fluids engineering
• /
• 제12권4호
• /
• pp.68-73
• /
• 2007

Computational Fluid Dynamics (CFD) approach is now playing an important role in the engineering process in these days. Generating proper grid system in time for the region of interest is prerequisite for the efficient numerical calculation of flow physics using CFD approach. Grid generation is, however, usually considered as a major obstacle for a routine and successful application of numerical approaches in the engineering process. CFD approach based on the unstructured grid system is gaining popularity due to its simplicity and efficiency for generating grid system compared to the structured grid approaches, especially for complex geometries. In this paper an automated triangular surface grid generation using CAD(Computer Aided Design) surface data is proposed. According to the present method, the CAD surface data imported in the STL(Stereo-lithography) format is processed to identify feature edges defining the topology and geometry of the surface shape first. When the feature edges are identified, node points along the edges are distributed. The initial fronts which connect those feature edge nodes are constructed and then they are advanced along the CAD surface data inward until the surface is fully covered by triangular surface grid cells using Advancing Front Method. It is found that this approach can be implemented in an automated way successfully saving man-hours and reducing human-errors in generating triangular surface grid system.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제8권11호
• /
• pp.1655-1664
• /
• 2013

Recently, it becomes essential to forecast the future and identify emerging technologies in order to improve R&D efficiency and gain a competitive advantage under rapidly changing environment of science and technology. Therefore this research aims to identify the future and emerging technologies especially for the industry and applied it to list top ten emerging technologies. In this study, we identify research fronts across all areas of science and technology through verifying and comparing the 2008 and the 2012 surge in research activities. Finally we detect rapidly increasing 10 promising technology areas. This research results are expected to provide valuable information to support stragegic and policy decision making.

• Journal of the Korean Society of Safety
• /
• 제27권6호
• /
• pp.70-77
• /
• 2012

Experimental investigations were performed to examine the characteristics of propagating flame fronts around multiple bars within a rectangular chamber. The explosion chamber is 400 mm in height, $700{\times}700mm^2$ in cross-section and has a large top-venting area, $A_v$, of $700{\times}210mm^2$. This results in a value of 0.44 for $A_v/V^{2/3}$ and a L/D value of 0.57. The multiple obstacles of length 700 mm with a blockage ratio of 30 % were placed within the chamber. Temporally resolved flame front images were recorded by a high speed video camera to investigate the interaction between the propagating flame and the obstacles. Results showed that the flame propagation speeds before the flame impinges onto the obstacle almost equal to the laminar burning velocity. As the propagating flame impinged on the obstacle, the central region of flame began to become concave, this resulted in the flame deceleration in the region. As the flame interacted with the modified flow filed generated behind the central obstacle, the probability density functions(PDFs) of the local flame displacement speed were extensively distributed toward higher speeds.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.30-33
• /
• 2015

In injection molding, many kinds of defects have occurred because of a characteristic of plastics injection molding. Weld line is one of the defects is formed when separated melt fronts recombine together during the mold filling stage. That is one of problems in injection molding. Weld lines in the appearance of plastics parts can deteriorate visible quality. And most importantly, the local mechanical strength in the weld line area can be significantly weaker. It could be one of the most problems for structural applications. In this study, the mold available two-shot-molding of same polymers have been designed, and a series of experiment about tensile strength in weld line area has been conducted using Taguchi's design of experiment to optimize injection molding conditions decreasing of weld strength and find out a factors affected weld strength in two-shot- molding.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1124-1126
• /
• 2003

The processes of regional scales in the East Korean coastal waters were investigated by analysis of the Synthetic Aperture Radar (SAR) images taken by the European Research Satellites ERS-1, ERS-2 and Envisat. More than 500 quick look frames taken in 1991-2003 were examined to detect the frames with clearly surface expressions of oceanic phenomena. 26 ERS-1/2 SAR and 11 Envisat wide swath Advanced SAR (ASAR) frames were selected and obtained from the European Space Agency in a form of the precision high-resolution images. The following oceanic phenomena and processes were evident in the radar imagery through the Korean costal waters: fronts, currents, eddies, internal waves, island and ship wakes, oil pollution, etc. They manifested themselves in the field of sea surface roughness, their scale ranged from several tens meters to about 100 km. The most common morphology of these phenomena was a series of contrast dark or light curvilinear lines and bands. The joint analysis of the discussed SAR images with other satellite and in situ data supported and enhanced our interpretation of SAR signatures.

• Korean Journal of Remote Sensing
• /
• 제23권1호
• /
• pp.65-69
• /
• 2007

The processes of regional scales in the East Korean coastal waters were investigated by analysis of the Synthetic Aperture Radar (SAR) images taken by the European Research Satellites ERS-1, ERS-2 and Envisat. More than 500 quick look frames taken in 1991-2003 were examined to detect the frames with clearly surface expressions of oceanic phenomena. 26 ERS-1/2 SAR and 11 Envisat wide swath Advanced SAR (ASAR) frames were selected and obtained from the European Space Agency in a form of the precision high-resolution images. The following oceanic phenomena and processes were evident in the radar imagery through the Korean costal waters: fronts, currents, eddies, internal waves, island and ship wakes, oil pollution, etc. They manifested themselves in the field of sea surface roughness, their scale ranged from several tens meters to about 100 km. The most common morphology of these phenomena was a series of contrast dark or light curvilinear lines and bands. The joint analysis of the discussed SAR images with other satellite and in situ data supported and enhanced our interpretation of SAR signatures.