• 한국의류학회지
• /
• 제25권3호
• /
• pp.577-585
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on cotton fabric were investigated. Effects of dyeing conditions and mordanting on dye uptake, color change and colorfastness were explored. Cationic agent treatment was done for cotton to improve low dyeability in natural dyeing. In addition antimicrobial activity of the cotton fabrics dyed with pomegranate colorants was examined by the shake flask method. Pomegranate colorants showed low affinity to cotton fiber and its adsorption isotherm was Freundlich type. Therefore, hydrogen bonding was involved in the adsorption of pomegranate colorants onto cotton fiber. Mordants did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on cotton fabric. In order to improve dye uptake, cotton was cationized by treating with Cationon UK(quarterly ammonium salt) and chitosan. The cationized cotton with Cationon UK showed higher dye uptake and shorter dyeing time, compared with the untreated cotton. Chitosan treated cotton also showed high dye uptake, but chitosan was less effective compared with Cationon UK. Fastness to washing, perspiration, and rubbing was not improved by mordanting and cationizing treatment, but light fastness was increased by all mordants and cationic agent. As dye concentration increased, bacterial reduction rate was increased and mordants did not significantly increase bacterial reduction rate.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.124-132
• /
• 2002

Dyeing properties of silk fabric on gromwell roof colorants were studied for the effect of dyeing conditions, such as methanol ratio, colorants concentration, pH, temperature and time etc. on the dye uptake and effect of mordants and mordanting methods on color change and dye uptake. And various colorfastnesses of dyed fabrics were evaluated far practical use. Gromwell colorants showed high affinity to silk and its isotherm adsorption curve was Freundlich type close to Nernst type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of cromwell colorants to silk fabric. Post-mordanting method gave higher K/S value than other methods, but it was not significantly different color values from unmordanted one. Gromwell colorants produced mainly R and RP color depending on mordants and mordanting method. Dyed fabrics showed high colorfastness irrespective of mordanting treatment. Light colorfastness was increased for repeatedly dyed and Fe mordanted dyed fabrics.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.125-132
• /
• 2012

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated. The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis. Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique. Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model. The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models. Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59 mg/g at 323 K, respectively. The thermodynamic parameters, Gibbs free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$), and entropy (${\Delta}S^o$) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K. It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.

• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.163-168
• /
• 2013

In this study, an innovative media, iron mixed ceramic pellet (IMCP) has been developed for arsenic (As) removal from groundwater. A porous, solid-phase IMCP (2-3 mm) was manufactured by combining clay soil, rice bran, and Fe(0) powder at $600^{\circ}C$. Both the As(III) and As(V) adsorption characteristics of IMCP were studied in several batch experiments. Structural analysis of the IMCP was conducted using X-ray absorption fine structure (XAFS) analysis to understand the mechanism of As removal. The adsorption of As was found to be dependent on pH, and exhibited strong adsorption of both As(III) and As(V) at pH 5-7. The adsorption process was described to follow a pseudo-second-order reaction, and the adsorption rate of As(V) was greater than that of As(III). The adsorption data were fit well with both Freundlich and Langmuir isotherm models. The maximum adsorption capacities of As(III) and As(V) from the Langmuir isotherm were found to be 4.0 and 4.5 mg/g, respectively. Phosphorus in the water had an adverse effect on both As(III) and As(V) adsorption. Scanning electron microscopy results revealed that iron(III) oxides/hydroxides are aggregated on the surface of IMCP. XAFS analysis showed a partial oxidation of As(III) and adsorption of As(V) onto the iron oxide in the IMCP.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.205-211
• /
• 2020

Chlorhexidine digluconate (CHD) in the aquatic environment causes irreversible change to microbes, making them resistant to biodegradation, which needs remediation other than biological process. Adsorption study was performed for the removal of CHD on fly ash (FA) as a function of pH and ionic strength. Experimental result has been validated by characterization using Scanning electron microscopy, Fourier Transform-Infrared Spectroscopy and Brunauer-Emmett-Teller. CHD adsorption with FA showed an increasing trend with an increase in pH. Variation in pH proved to be an influential parameter for the surface charge of adsorbent and the degree of ionization of the CHD molecules. The adsorption capacity of CHD decreased from 23.60 mg g-1 to 1.13 mg g-1, when ionic strength increased from to M. The adsorption isotherms were simulated well by the Freundlich isotherm model having R2 = 0.98. The Lagergren's model was incorporated to predict the system kinetics, while the mechanistic study was better explained by pseudo-second order for FA. On the basis of operational conditions and cost-effectiveness FA was found to be more economical as an adsorbent for the adsorption of CHD.

• 한국환경과학회지
• /
• 제27권9호
• /
• pp.753-762
• /
• 2018

The present study set out to investigate the adsorption of Cd(II) ions in an aqueous solution by using Peanut Husk Biochar (PHB). An FT-IR analysis revealed that the PHB contained carboxylic and carbonyl groups, O-H carboxylic acids, and bonded-OH groups, such that it could easily adsorb heavy metals. The adsorption of Cd(II) using PHB proved to be a better fit to the Langmuir isotherm than to the Freundlich isotherm. The maximum Langmuir adsorption capacity was 33.89 mg/g for Cd(II). The negative value of ${\Delta}G^o$ confirm that the process whereby Cd(II) is adsorbed onto PHB is feasible and spontaneous in nature. In addition, the value of ${\Delta}G^o$ increase with the temperature, suggesting that a lower temperature is more favorable to the adsorption process. The negative value of ${\Delta}H^o$ indicates that the adsorption phenomenon is exothermic while the negative value of ${\Delta}S^o$ suggests that the process is enthalpy-driven. As an alternative to commercial activated carbon, PHB could be used as a low-cost and environmentally friendly adsorbent for removing Cd(II) from aqueous solutions.

• 한국환경과학회지
• /
• 제20권2호
• /
• pp.215-222
• /
• 2011

The adsorption behavior of nitrate nitrogen was investigated from aqueous solution using char prepared from oak chip. The removal rate of nitrate nitrogen was found to be dependent on temperature and it is increased as the temperature increase. Adsorption equilibrium data of nitrate nitrogen on oak char. reasonably fitted Langmuir and Freundlich isotherm models. The adsorption energy obtained from D-R model was 12.5 kJ/mole at $20^{\circ}C$ indicating an ion exchange process as primary adsorption mechanism. Thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$, and ${\Delta}S^o$ were -23.76 kJ/mole, 26.1 kJ/mole and 89.7 J/K mole at $20^{\circ}C$, respectively, indicated that the nature of nitrate nitrogen adsorption is spontaneous and endothermic.

• 한국대기환경학회지
• /
• 제25권4호
• /
• pp.316-324
• /
• 2009

Carbon based sorbents for $CO_2$ adsorption were prepared by impregnation with alkali metals ($Li^+$, $K^+$) and alkaline earth metals ($Ca^{2+}$, $Mg^{2+}$). BET surface area of test sorbents was lower than the intrinsic activated carbon. In particular, impregnation of $Ca^{2+}$ or $Mg^{2+}$ resulted in lower surface area of specific adsorption sites than that of $Li^+$ or $K^+$. While the adsorption capacity for $CO_2$ was high in the sorbents containing $Ca^{2+}$ and $Mg^{2+}$, strong interaction with $CO_2$ would cause to drop the capacity after regeneration. The adsorption was found high relatively in the flow with a high concentration of $CO_2$ and in a low flow rate. The adsorption isotherm for the present modified AC sorbents fits well with the Freundlich model.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.605-613
• /
• 2020

This study is to investigate the possibility of using activated carbon prepared from Iraqi date-pits (ADP) which are produced from palm trees (Phoenix dactylifera L.) as low-cost reactive material in the permeable reactive barrier (PRB) for treating lead (Pb⁺²) from the contaminated groundwater, and then compare the results experimentally with other common reactive materials such as commercial activated carbon (CAC), zeolite pellets (ZP). Factors influencing sorption such as contact time, initial pH of the solution, sorbent dosage, agitation speed, and initial lead concentration has been studied. Two isotherm models were used for the description of sorption data (Langmuir and Freundlich). The maximum lead sorption capacities were measured for ADP, CAC, and ZP and were found to be 24.5, 12.125, and 4.45 mg/g, respectively. The kinetic data were analyzed using various kinetic models particularly pseudo-first-order, pseudo-second-order, and intraparticle diffusion. COMSOL Multiphysics 3.5a depend on finite element procedure was applied to formulate transmit of lead (Pb⁺²) in the two-dimensional numerical (2D) model under an equilibrium condition. The numerical solution shows that the contaminant plume is hindered by PRB.

• 상하수도학회지
• /
• 제29권5호
• /
• pp.565-573
• /
• 2015

The influencing factors to remove phosphate were evaluated by converter slag (CS). Experiments were performed by batch tests using different CS sizes and column test. Solutions were prepared at the different pH and concentrations. The maximum removal efficiency was obtained over 98% with the finest particle size, $CS_a$ within 2 hours in batch tests. The removal efficiency was increased in the order of decreasing size with same amount of CS for any pH of solutions. The adsorption data were well fitted to Freundlich isotherm. From the column experiment, the specific factors were revealed that the breakthrough removal capacity (BRC) $x_b/m_{cs}$, was decreased by increasing the influent concentration. The breakthrough time, tb was lasted shorter as increasing the influent concentration. The pH drop simultaneously led to lower BRC drop during the experimental hours. The relation between the breakthrough time and the BRC to influent concentration was shown in the logarithmic decrease. Results suggested that the large surface area of CS possessed a great potential for adsorptive phosphate removal. Consequently particle size and initial concentration played the major influencing factors in phosphate removal by converter slag.