• Journal of Korean Society on Water Environment
• /
• v.16 no.4
• /
• pp.555-563
• /
• 2000

The study was conducted to evaluate the adsorption equilibrium of heavy metals on bone charcoal made of livestock bone which was sintered at $550{\sim}600^{\circ}C$. Analysis of bone charcoal by XRD and FT-IR showed that crystal structure was similar to that of synthetic hydroxyapatite. Adsorption equilibrium capacity of single component (Pb, Cd, and Zn) on bone charcoal could be expressed as Langmuir, Freundlich, and Sips equations. Sips isotherm was best among the three isotherms. The values predicted by IAST(ideal adsorbed solution theory) showed good relationship to the experimental data in multicomponent adsorption equilibrium. Adsorption affinity was in order of Pb, Cd, and Zn. The order was same in case of activated carbon or synthetic hydroxyapatite. Through the study results. it would be expected that bone charcoal made of livestock could be used in field of wastewater treatment plants as adsorbent to remove heavy metal.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.63-70
• /
• 1999

A study on the zeolite synthesized of bituminous coal fly ash from power plant has been carried out to reuse industrial waste. The synthesized zeolite was proved to be 4A type by means of the X-ray diffraction analysis and the degree of crystallinity was found to be higher than 90%. Then the synthesized zeolite was used as an adsorbent to remove the heavy metal ions in the CU, Pb, and Cd containing wastewater and water. Also, adsorption characteristics and kinetics of synthesized zeolite in the each metal ion solutions were studied. In each ion solutions, the adsorbed amounts of Pb, Cd, and Cu to the unit weight of synthesized zeolite were 141.6, 118.8, and 131.4mg/g respectively when each metal ion concentration was 500mg/L solution. The adsorption kinetics was fitted well to the Freundlich isotherms. The value of l/n for Pb, Cd, and Cu and 0.27, 0.50, and 0.66, respectively. Those results showed that the synthesized zeolite could be used as an adsorbent to remove single heavy metal ions in the wastewater and water. The heats of adsorption, H values of Pb, Cd, and Cu were 4.87, 14.95, and 18.23kacl/mol by the Henry-van't Hoff equation.

• Carbon letters
• /
• v.14 no.1
• /
• pp.27-33
• /
• 2013

An increase in population initiating rapid industrialization was found to consequently increase the effluents and domestic wastewater into the aquatic ecosystem. In this research the potentialities of Sambucus nigra L. (SNL) plant in the remediation of water, contaminated with methylene blue (MB), a basic dye were investigated. SNL was chemically impregnated with $KHCO_3$. Operating variables studied were pH, amount of adsorbent and contact time. In general, pH did not have any significant effect on colour removal and the highest adsorption capacity was obtained in 0.035 g MB/g-activated carbon. The Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption models were applied to describe the equilibrium isotherms. The adsorption isotherm data were fitted to the Temkin isotherm. The mass transfer property of the sorption process was studied using Lagergren pseudo-first-order and chemisorption pseudo-second-order kinetic models. The sorption process obeyed the pseudo-second-order kinetic model. The surface area, pores volume and diameter were assessed by the Brunauer-Emmett-Teller and Barrett-Joyner-Halenda methods. The results were compared to those from activated carbon (Merck) and an actual sample. The results indicate that SNL can be employed as a natural and eco-friendly adsorbent material for the removal of dye MB from aqueous solutions.

• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.387-391
• /
• 1999

$Pb^{2+}$ and $Cr^{3+}$ uptake capacity by Sargassum horneri was 185.5 mg $Pb^{2+}$/g biomass and 102.6 mg $Cr^{3+}$/g biomass, respectively. An adsorption equilibria were reached within about 0.5 hr for $Pb^{2+}$ and 1 hr for $Cr^{3+}$. The adsorption parameters for $Pb^{2+}$ and $Cr^{3+}$ were determined according to Langmuir and Freundlich model. With an increase in pH values of 2 to 5, $Pb^{2+}$ uptake was increased, however $Cr^{3+}$ uptake jwas constant. The selectivity of mixture solution showed the uptake order of $Pb^{2+}$>$Cu^{2+}$>$Cr^{3+}$>$Cd^{2+}$. $Pb^{2+}$ and $Cr^{3+}$ adsorbed by S. horneri could be recovered from 0.1M HCl, 0.1M ${HNO}_3$ and 0.1M EDTA by desorption process, and the efficiency of $Pb^{2+}$ desorption was above 98%, whereas the efficiency of $Cr^{3+}$ desorption was below 34%.

• Journal of Environmental Science International
• /
• v.23 no.9
• /
• pp.1609-1618
• /
• 2014

In this study, as a fundamental study for the remediation of the radionuclides-contaminated soil, the adsorption of cobalt, strontium, and cesium on natural soil and kaolin were experimently investigated and adsorption characteristics were evaluated by using several adsorption kinetic and isotherm models. The pseudo-first-order kinetic model (PFOM), pseudo-second-order kinetic model (PSOM), one-site mass transfer model (OSMTM), and two compartment first-order kinetic model (TCFOKM) were used to evaluate the kinetic data and the pseudo-second-order kinetic model was the best with good correlation. The adsorption equilibria of cobalt, strontium, and cesium on natural soil were fitted successfully by Redlich-Peterson and Sips models. For kaolin, the adsorption equilibria of cobalt, strontium, and cesium were fitted well by Redlich-Peterson, Freundlich, and Sips models, respectively. The amount of adsorbed radionuclides on natural soil and kaolin was in the order of cesium > strontium > cobalt. It is considered that these results could be useful to predicting the adsorption behaviors of radionuclides such as cobalt, strontium, and cesium in soil environments.

• Fashion & Textile Research Journal
• /
• v.9 no.1
• /
• pp.119-123
• /
• 2007

Dyeing properties of soybean fabrics on gromwell colorants were studied for the effect of dyeing conditions, such as colorants concentration, temperature, time and pH on the dye uptake and effect of mordants on color change, dye uptake and various colorfastness. Antimicrobial activity of soybean fabrics dyed and sim-mordanted with gromwell colorants was examined by shake flask method. Gromwell colorants showed considerably affinity to soybean fabric and its isotherm adsorption curve was Freundlich type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of gromwell colorants to soybean fabric. Soybean fabrics showed R color on Al, Cu and Sn mordant, RP color on Cr and Fe mordant, but soybean fabrics showed low dye uptake depending on mordanting treatment. Light colorfastness was increased for Cr and Fe mordants. Staphylococcus aureus reduction rates were above 90% for Cr and Cu mordanted soybean fabrics, and the others were poor. Klebsiella pneumoniae reduction rates soybean fabrics did not show reduction rate hardly.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.577-585
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on cotton fabric were investigated. Effects of dyeing conditions and mordanting on dye uptake, color change and colorfastness were explored. Cationic agent treatment was done for cotton to improve low dyeability in natural dyeing. In addition antimicrobial activity of the cotton fabrics dyed with pomegranate colorants was examined by the shake flask method. Pomegranate colorants showed low affinity to cotton fiber and its adsorption isotherm was Freundlich type. Therefore, hydrogen bonding was involved in the adsorption of pomegranate colorants onto cotton fiber. Mordants did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on cotton fabric. In order to improve dye uptake, cotton was cationized by treating with Cationon UK(quarterly ammonium salt) and chitosan. The cationized cotton with Cationon UK showed higher dye uptake and shorter dyeing time, compared with the untreated cotton. Chitosan treated cotton also showed high dye uptake, but chitosan was less effective compared with Cationon UK. Fastness to washing, perspiration, and rubbing was not improved by mordanting and cationizing treatment, but light fastness was increased by all mordants and cationic agent. As dye concentration increased, bacterial reduction rate was increased and mordants did not significantly increase bacterial reduction rate.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.50-56
• /
• 2012

In this study, loess composites, loess with lanthanum and with aluminum, were made and evaluated for treatment of phosphorus removal in natural water system. Desiccation method for production of loess composite was superior to centrifugation method in obtaining high concentrated composites of lanthanum and aluminum. Washing of loess lanthanum composite by water did not deteriorat the lanthanum concentration in the composite, but this lowered the aluminum concentration of loess aluminum composite. Total of 15 and 37.5% of aluminum contents were removed after first washing treatment in aluminum loess of 0.05% and 0.1% respectively. However, no more aluminum loss was monitored with increase of washing times. Phosphorus removal efficiencies were not decreased with washed loess aluminum composite. Phosphorus removal was successfully achieved by adsorption of phosphate to loess composite at pH range of 5.0 ~ 8.0. Freundlich and Langmuir adsorption isotherm was observed in the adsorption of phosphate for loess composite. Dosages of 0.05% and 0.1% lanthanum composite for 95% of phosphorus removal could reduce its usage amount to 25% and 50%, respectively, comparing with dosage of loess alone. Dosages of 0.05% and 0.1% aluminum composite could reduce its usage amount to 48% and 63%, respectively.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.841-849
• /
• 2012

The effluent quality of phosphorus is strengthened by the national standard to conserve water resources to lessen the eutrophication threat. The soluble phosphate in the wastewater effluent can be removed using the converter slag as solid waste produced through the steel making process. The experiments for removal efficiencies and removal constants were performed for this research with the artificial wastewater following several different conditions, particle size, phosphate concentration and initial pH. The correlation coefficients of Freundlich adsorption isothem were 0.9505 for $PS_A$, 0.9183 for $PS_B$, respectively. The removal efficiency was 87-94 % for $PS_A$ and 90-96 % for $PS_B$ respectively. The pH of the wastewater was elevated to pH 11.8 for the initial pH 8.5, phosphate removal efficiency was the highest as 84 % ~ 98 %. In case of 10 mg/L of the intial phosphate, the removal efficiency was 96 ~ 98 %. The more initial pH increases, the higher the reaction rate constant is.

• Carbon letters
• /
• v.11 no.3
• /
• pp.206-210
• /
• 2010

Removal of dyes Reactive Blue 221, N Blue RGB and Acid Blue MTR using two different samples of activated carbon by static batch method was studied. Experimental data on optical density of solutions at different concentrations ranging from 10 to 100 mg/L and of solutions after adsorption on activated carbon samples were measured. Calibration curves were plotted and the amount of dye $q_e$ adsorbed was calculated. The data was fitted to Langmuir and Freundlich isotherms for two different carbon samples and different concentration and pH values. Constants were calculated from the slope and intercept values of the isotherms. Coefficient of correlation $R_2$ and Standard Deviation SD were also noted. The data fitted well to the isotherms. Carbon sample $C_1$ showed higher potential to adsorb all the three dyes. Adsorption was higher at lower concentrations. Carbon sample $C_2$ showed better adsorption in acidic pH as compared to in alkaline pH. From the analysis of the data capacity of $C_1$ and $C_2$ to remove the dyes from water have been compared.