• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.712-721
• /
• 2016

This experiment was conducted to investigate the endophytic bacterium Herbaspirillum spp effect on seed germination and sprout growth of tartary buckwheat. Inoculant concentration (%v/v) and seed soaking time were applied 10, 20 and 40% and 0, 4, 8, 12 hour, respectively. The experiment was carried out in a growth chamber maintained temperature at 20, 25 and $30^{\circ}C$ without light for 7 days. Results showed that, 10 to 20% (v/v) inoculant concentration by 4 to 8 h seed soaking time at $20^{\circ}C$ temperature increased seed vigor rate and total seed germination rate 80-95% and 90-100%, respectively. On the other and, seed inoculation with Herbaspirillum spp. increased hypocotyl length (13-15 cm), root length (8-11 cm), total fresh weight (135-296 g) and total dry weight (7-10 g), compared to control. It is indicated that sprouts growth and yield depends on inoculation concentrations, seed soaking time and temperature. Therefore, it would be suggested that seed inoculation with Herbaspirillum spp. at concentration of 10 to 20% (v/v), soaking time 4 to 8 h and temperature $20^{\circ}C$ promote seed germinations and sprout growth rate of tartary buckwheat.

• Carbon letters
• /
• v.9 no.2
• /
• pp.115-120
• /
• 2008

Rubber reinforcing carbon black N330 was treated by physical activation under $CO_2$ to different degrees of burn-off. The mechanical properties indicating the reinforcement of SBR (Styrene-Butadiene Rubber) vulcanizates filled by activated carbon blacks, such as tensile strength, modulus at 300% strain and elongation at break were determined. During $CO_2$ activation of fresh carbon blacks, the development of microporous structure caused an increase of extremely large specific surface area and the porosity turned out to be an increasing function of the degree of burn-off. The tensile strength and modulus at 300% of activated carbon blacks filled rubber composites were improved at lower loading ratios of 20 and 30 phr, but decreased drastically after 30 phr, which is considered that it might be difficult to get a fully dispersed rubber mixture at higher loading ratios for fillers having very large specific surface areas. However, the Electromagnetic Interference (EMI) shielding effectiveness of SBR rubber composites having activated carbon black at 74% yield were improved at a large extent when compared to those having raw carbon black and increased significantly as a function of increasing loading ratio.

• The Plant Pathology Journal
• /
• v.34 no.3
• /
• pp.218-235
• /
• 2018

Plant growth promoting rhizobacteria and endophytic bacteria were isolated from different varieties of turmeric (Curcuma longa L.) from South India. Totally 50 strains representing, 30 PGPR and 20 endophytic bacteria were identified based on biochemical assays and 16S rDNA sequence analysis. The isolates were screened for antagonistic activity against Pythium aphanidermatum (Edson) Fitzp., and Rhizoctonia solani Kuhn., causing rhizome rot and leaf blight diseases in turmeric, by dual culture and liquid culture assays. Results revealed that only five isolates of PGPR and four endophytic bacteria showed more than 70% suppression of test pathogens in both assays. The SEM studies of interaction zone showed significant ultrastructural changes of the hyphae like shriveling, breakage and desication of the pathogens by PGPR B. cereus (RBacDOB-S24) and endophyte P. aeruginosa (BacDOB-E19). Selected isolates showed multiple Plant growth promoting traits. The rhizome bacterization followed by soil application of B. cereus (RBacDOB-S24) showed lowest Percent Disease Incidence (PDI) of rhizome rot and leaf blight, 16.4% and 15.5% respectively. Similarly, P. aeruginosa (BacDOB-E19) recorded PDI of rhizome rot (17.5%) and leaf blight (17.7%). The treatment of these promising isolates exhibited significant increase in plant height and fresh rhizome yield/plant in comparison with untreated control under greenhouse condition. Thereby, these isolates can be exploited as a potential biocontrol agent for suppressing rhizome rot and leaf blight diseases in turmeric.

• Korean journal of applied entomology
• /
• v.10 no.1
• /
• pp.59-62
• /
• 1971

The highest fresh weight of Agaricus bisporus was obtained at pH 7.5 of casing soil. Above or below this pH level, the yields were significantly reduced. Stimulatory effect of calcium on the mycelial growth depended upon pH of casing soil, In neutral or slightly alkaline soil, the stimulatory effect was increased. The effects of supplementing calcium carbonate or hydrated lime to casing soil were assumed not only the influence of pH of casing soil, but also stimulatory effect of calcium ion on mycelial growth of A. bisporus.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.66-78
• /
• 1992

The essential oil of Korean valerian root ( Valeriana fauriei roar. dasycarpa Hara) was isolated by simultaneous distillation Sl extraction. The oil content of fresh root was 0.7% (wb) and that of dried root was 2.1 5 (db) and sensory analysis of the oil indicated sweet-balsamic, woody and floral characteristic aroma notes. The oil was fractionated into one hydrocarbon fraction and three oxygenated hydrocarbon fractions by using silica gel column chromatograpy. Each fraction was analyzed by capillary GC and GC-MS. Out of 81 characterized compounds, the major compounds were a-pinene, camphene, $\beta$-pinene, bornyl acetate, borneol , bornyl iso-valerate and sesquiphellandrene and the characteristic floral and woody aroma of neutral fraction of Korean valerian root could be due to be the presence of oxygenated compounds such as borneol, bornyl acetate, bornyl iso-valerate, p-ionone ana $\beta$-ionone epoxide. Comparing the yield of Korean valerian root with those from other origins reported, oil content of Korean valerian root was higher than those of European and Indian origins.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.2
• /
• pp.6-15
• /
• 1998

A total of forty five-ply, 30- by 30-cm lauan and larch plywood sheets were manufactured in the laboratory using commercial urea and phenol resin adhesives; half of these sheets were treated with fresh concrete. Each sheet was carbonized for 2, 4, and 6hours at $400^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$, respectively, and their physical properties were measured. The yie1d of charcoal decreased as carbonization temperature and time increased. Charcoal yield was greater in plywood than in veneer, and slightly greater in plywood treated with concrete compared to untreated plywood. Plywood manufactured with phenol resin adhesive had higher pH, higher equilibrium moisture content (EMC), and greater adsorption of methylene-blue dye compared to plywood manufactured with urea resin. For concrete-treated plywood, pH was greater than 10 even when the sheets were carbonized for 2hours at $400^{\circ}C$. Although the EMC of the phenol resin plywood was higher than that of the urea resin plywood, EMC of the phenol resin was lower than that of the urea resin. The larch phenol resin plywood that was carbonized for 6 hours at $750^{\circ}C$ adsorbed more methylene-blue than did the commercia1 wood-based activated charcoal as a result of total pore volume and surface area.

• Korean Journal of Microbiology
• /
• v.19 no.4
• /
• pp.163-173
• /
• 1981

The distribution of methanol-assimilating yeasts on three different sources (elm bark, soil and fresh-water mud) and the growth conditions of a new strain of Candidaboidinii (SIO) wereexamines. From 150 samples, 91 methanol yeasts were isolated through enrichment culture ; they were identified as 77 strains of Candida boidinii including four new strains, 5 isolates of Torulopsis pinus, 3 strains of Hansenula polymorpha and one sstrain of Pichia pastoris respectively. The comparison of these yeasts with three sources indicated that decaying bark of elm tree other two, and that Gandida boidinii was most frequently distributed in all three sources. Four new strains of Candida boidinii were freshly isolated and their taxonomical properties were discussed. Of them, SIO strain was selected and characterized for its growth on methanol. This yeast could grow well on less than 1%(v/v) methanol. However, its growth was inhibited at 10% methanol. The cell yield was 3.1g (dry weight) per 1000ml of mineral mediurr, containing 1%(v/v) methanol as well as 01.% yeast extract as additive. The concentration of 0.1% yeast extract appears to be effective for the biomass production. Optimum conditions for growth on methanol was found to be : $28^{\circ}C,\;NH_4^+$ as nitrogen sources, thiamine as vitamin, and pH 4.5 to 6.0. The cell composition was as follows : crude protein and nucleic acids were 54% and 7% respectively. The amino acids were also described.

• KSBB Journal
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1991

To produce economically important indole alkaloids by cell cultures, we selected protoplastsderived clones (protoclones) of vinca (Catharanthus roseus) for high yields of catharanthine and ajmalicine. Protoplasts were enzymatically isolated from suspension-cultured cells. The highest plating efficiency (1%) was obtained when protoplasts were plated at a density of 1$\times$105 protoplasts/ml in a culture medium solidified with 0.4% Seaplaque agarose. The growth rates of 40 protoclones subcultured on a solid medium varied over a wide range. Protoclone VPC-6, which had the highest growth rate, was observed to produce relatively high yields of catharanthine and ajmalicine when cultured in a liquid medium. Although the original cell line did not produce catharanthine at a detectable level by HPLC, protoclone VPC-10 produced it at a level of 5.9$\mu\textrm{g}$/g fresh weight of cells for 10 days of culture. Under the same conditions, protoclone VPC-15 produced ajmalicine at a level of 133.6$\mu\textrm{g}$/g, of which productivity was improved about ,3 times than that of the original cell line. The results indicate that differences in the growth rate and indole alkaloid yield among the protoclones reflect the somaclonal variation in suspnsion-cultured cells.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.5
• /
• pp.340-345
• /
• 2001

High rates of nitrogen fertilization dangerously increase the nitrate content of vegetable crops, and the accumulation of nitrate in edible crops is undesirable because of potential risks to human health. Micronutrient solution containing Cu, Mn, Mo, Zn was tested for the suppression of nitrate accumulation in lettuce grown in pots treated with Mg fertilizer under a greenhouse condition. The micronutrient solution was sprayed on leaves at 3 and 4 weeks after transplanting of 20-day old seedlings. Plants were harvested after 5-week growth, and yield, contents of chlorophyll, sugar, micronutrient and nitrate, and also nitrate reductase activity were measured. Fresh weight of lettuce was significantly increased by the application of Mg and micronutrients, and the effect was the most significant in the Mg+micronutrient treatment. Also contents of chlorophyll and micronutrients were higher in the plants of micronutrient treatments. Contents of nitrate were reduced by about 14-18% in lettuce with Mg and/or micronutrient applications. Compared to the plants of control treatment, nitrate reductase activity was also higher in those plants treated with micronutrients, and in the treatment of Mg+micronutrients the enzyme activity was six times as high as that of control treatment. Although the effect of mineral nutrients on the suppression of nitrate accumulation in lettuce was relatively small in this study, an appropriate supply of mineral nutrients could be one of the solutions for the nitrate accumulation in vegetables.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.494-504
• /
• 2016

Eucalyptus oils are widely used as spices, perfume industrial materials, food flavorings, and medicines. Several types of Eucalyptus oils also have insecticidal activity and as carminative. This study investigated the chemical composition, insecticidal (larvicidal and repellent) activity of E. urophylla oil against filarial mosquito Culex quinquefasciatus. E. urophylla oil was obtained from fresh leaves by water-steam distillation with oil yield 1.08%. E. urophylla oil in this study had no color (clear), has odor (typical eucalyptus), with specific gravity 0.941; refractive index 1.465; miscibility in 70% ethanol 1 : 3; and optical rotation (-) $5.83^{\circ}$. The major compounds of the oil were ${\alpha}$-pinene (11.73%), 1,8-cineole (49.86%), ${\beta}$-ocimene (6.25%), ${\gamma}$-terpinene (9.11%), and ${\alpha}$-terpinyl acetate (7.63%). The result showed the excellent insecticide activity against C. quinquefasciatus. The oil provided larvicidal activity with $LC_{50}$: 80.21 ppm and $LC_{90}$: 210.18 ppm, and repellent activity with $IC_{50}$: 0.82% and $IC_{90}$: 4.88%. The present study showed the effectiveness of E. urophylla as natural insecticide against C. quinquefasciatus, the mosquito vector of filariasis.