단결정상을 가지는 CaZrO3 : Eu3+ 형광체를 스컬용융법으로 합성하였다. 합성된 형광체의 결정구조, 형태 및 광학적 특성은 XRD, SEM, UV 형광반응 및 PL을 분석하였다. 출발 원료는 CaO : ZrO2 : Eu2O3를 0.962 : 1.013 : 0.025 mol%로 하여 냉각도가니에 충진하였다. 냉각도가니는 내부 직경 120 mm, 높이 150 mm이며, 혼합된 파우더 3 kg은 3.4 MHz의 출력 주파수로 1시간 이내에 완전히 용융되어 2시간 동안 유지시킨 후 자연냉각 시켰다. XRD 측정에서는 다른 결정상은 측정되지 않았으며 페로브스카이트 구조의 정방정계로 분석되었다. 합성된 형광체는 UV 광에 의해 여기 될 수 있고 방출 스펙트럼 결과는 615 nm에서 자기 쌍극자 전이 5D0→7F2로 인해 CaZrO3 : Eu3+의 밝은 적색 발광이 우세하였다.
Commercially pure titanium (CP Ti) and Ti-6Al-4V alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element, such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}-stabilizer$ and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Manganese(Mn) plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Radio frequency(RF) magnetron sputtering in the various PVD methods has high deposition rates, high-purity films, extremely high adhesion of films, and excellent uniform layers for depositing a wide range of materials, including metals, alloys and ceramics like a hydroxyapatite. The aim of this study is to research the Mn coatings on the micro-pore formed Ti-29Nb-xHf alloys by RF-magnetron sputtering for dental applications. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. Each alloy was anodized in solution containing typically 0.15 M calcium acetate monohydrate + 0.02 M calcium glycerophosphate at room temperature. A direct current power source was used for the process of anodization. Anodized alloys was prepared using 270V~300V anodization voltage at room. Mn coatings was produced by RF-magnetron sputtering system. RF power of 100W was applied to the target for 1h at room temperature. The microstructure, phase and composition of Mn coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.
본 연구에서는 지방부 2차로 도로구간에 대한 사고예측계수를 개발하고자 하였으며, 사고예측계수(AMF)는 설계 안전성 평가시 도로구간의 기하구조적요인, 운영적 요인 등 개별 요소가 사고빈도에 미치는 영향을 반영하는 계수이다. 개발한 지방부 2차로 도로의 사고예측계수항목은 기존문헌과 모형을 통해 횡단보도와 진출입구의 밀도, 지형(산악지), 토지이용도(주거), 중앙분리대의 설치여부로 결정되었다. 사고예측계수의 개발은 모형을 이용한 방법을 채택하였으며 산출된 값에 대해서는 전문가 평가를 통하여 항목의 적정성을 평가하고, AMF의 예측력, 국내도로 특성 반영도 등 두 가지 측면에서 적용성 평가를 수행하였으며 국외의 AMF를 적용했을 시와 비교분석하여 평가하였다. 전문가를 통한 적정성에 대한 평가에서는 개발된 계수의 항목이 전반적으로 적정한 것으로 평가되었으나 토지이용도의 주거 항목의 값에 대하여 과대 예측하는 결과를 유발 할 수 있을 것으로 평가되었다. 한편, 국외의 사고예측계수 및 실제사고와의 비교분석결과는 전체 예측빈도로 판단한 결과, 미국에서 개발 중인 IHSDM과 본 연구의 결과가 실제에 가장 근접하는 것으로 나타났으며 미국 텍사스 RSDS의 값은 전반적으로 결과를 과대 예측하는 것으로 나타났다. 또한 실제 사고발생위험도가 높은 도로구간에 대한 예측은 본 연구의 계수 값을 적용하는 경우 반영도가 더 좋은 것으로 나타났다.
Vancomycin은 세포벽의 합성을 억제하여 세균에 대한 항균효과를 나타내는 glycopeptide 계 항생물질로서 그람양성세균으로 인한 감염치료에 광범위하게 사용되며, 특히 methicillin 내성 포도상구균의 선택적 치료제로 쓰이고 있다. 그러나 최근 임상검체에서도 중등도의 내성을 가지는 포도상구균 (Mu50: MIC 8 $\mu\textrm{g}$/ml)이 나타나기 시작하였고 여러 가지 여건상 국내에서도 내성균주가 분리될 가능성이 높다고 사료되어 임상검체 중 methcillin 내성 포도상구균을 대상으로 vancomycin 감수성 및 내성빈도 조사를 실시하고 이에 따른 내성기전을 알아보고자 하였다. 본 실험 결과 107주 (株)의 methicillin 내성균주 중 23.3%가 vancomycin에 대하여 내성을 보였으며 vancomycin 내성을 나타내는 표준균주인 Mu50과 Mu3의 중간 정도의 내성빈도를 보였다. 중합효소 연쇄반응을 통해 장구균의 vancomycin 내성에 관여하는 vanA, vanB, vanC1, vanC2, vanH 특이 유전자는 증폭되지 않았다. SDS-PAGE를 실시하여 81 kDa, 58 kDa, 33 kDa, 28 kDa 등의 주요 단백 분획을 확인하였고, Mu50에서 45 kDa의 특징적인 단백 분획을 관찰하였다. LDH enzyme assay에서는 한 개의 검체가 Mu50과 함께 높은 LDH 활성을 보였다.
미래의 궁극에너지로 인식되고 있는 핵융합에너지 개발을 위해서는 DEMO라는 최종 실증 단계를 거쳐야만 한다. 특히 중국, EU, 일본 등의 주요 국가는 DEMO 건설에 대한 구체적 계획을 수립하고 이를 실행 중에 있다. 한국도 1995년부터 KSTAR 사업을 시작으로 핵융합 연구개발에 착수한 점을 감안하면, 핵융합에너지 상용화라는 최종 목표달성 뿐만 아니라, 주요 국가와 DEMO 경쟁 상황에서 주도권을 확보하기 위한 본격적 연구개발이 필요하다. 이에 본 논문에서는 DEMO 개발을 위한 핵심기술을 파악하기 위하여 준정량적 방법론을 적용, 해당 분야의 핵심기술을 도출함으로써 우선적으로 연구개발이 필요한 기술을 식별하여 향후 연구개발 추진시 기술별 우선순위를 제안하고자 한다. 이를 위한 핵융합 에너지 개발과 관련하여 핵융합의 과학적 원리, 주요국가의 DEMO 개발 동향 등을 파악한다. 다음으로 핵융합 실증로와 관련된 기술분류 체계를 검토하여 분석할 기술분류 체계를 선정한다. 선정된 기술체계에 준정량적 방법론으로 기술수준(TRL)을 파악하고 이를 보완하기 위하여 분석적 계층화 과정(AHP)을 적용한다. TRL과 AHP의 결과를 종합하여 우선적으로 확보해야 할 핵융합 실증로의 핵심기술은 실증로용 연소 플라즈마 기술, 대면재료기술, 구조재기술, 고주파 가열장치 기술, 중성입자빔 장치기술, 안전기술, 연소플라즈마 진단장치기술, 핵융합로 시뮬레이터기술 등으로 나타났다.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제30권4호
/
pp.271-281
/
2004
Adenoid cystic carcinoma is malignant tumor in salivary gland, and its behavior is very invasive. Of all malignant tumor adenoid cystic carcinoma is occured in frequency of 4.4% in major salivary gland, and 1.29% in minor salivary gland. Histopathologically, adenoid cystic carcinoma is characterized by a cribriform appearance, and tubular form and solid nest type tumor can be seen. The tumor cell structure composed of modified myoepithelial cell, and basaloid cell. Extracellular matrix of this tumor cell contains variable ground substance with basement membrane component. Basement membrane matrix composed of collagen fibers, glycoproteins, proteoglycans, and its function is well known that it participate in differentiation, proliferation, and growth of tumor cell. Basement membrane molecule is essential for invasion of peripheral nerve, blood vessel, skeletal muscle in tumor cell of adenoid cystic carcinoma. In many studies, the tumor cell of adenoid cystic carcinoma containing modified myoepithelial cell participate in synthesis of proteoglycan. In this study, tissue sample of adenoid cystic carcinoma of human salivary gland were obtained from 15 surgical specimen, and all specimen were routinely fixed in 10% formalin and embedded. Serial $4-{\mu}m$ thick sections were cut from paraffin blocks. the histopathologic evaluation was done with light microscopy. And, the immunohistochemical staining, characteristics of glycosaminoglycan were observed. For biochemical analysis of glycosaminoglycan, isolation of crude glycosaminoglycan from tumor tissue and Western bolt analysis were carried out. With transmission electomicroscopy, tumor cell were observed. Biologic behavior of adenoid cystic carcinoma was observed with distribution and expression of basement membrane of glycosaminoglycan in tumor cells, The results obtained were as follows: 1. In immunohistochemical study, chondroitin sulfate is postively stained in tumor cell and interstitial space, dermatan sulfate is weakly stained in ductal cell. But keratan sulfate is negatively stained. 2. In immunohistochemical study, heparan sulfate is strong positive stained in tumor cell and basement membrane, especially in invasion area to peripheral nerve tissue. 3. In transmission electromicroscpic view, the tumor cells are composed modifed myoepithelial cells, and contains many microvilli and rough endoplasmic reticulum. 4. In Western blot analysis, the expression of glycosaminoglycan is expressed mostly in heparan sulfate. From the results obtained in this study, tumor cell of adenoid cystic carcinoma is composed modified myoepithelial cell, and glycosaminoglycan of basement membrane molecule of heparan sulfate and chondroitin sulfate mostly participate in the development and invasiveness of adenoid cystic carcinoma by immunohistochemical study and western blot analysis.
Pleomorphic adenoma is the most common benign tumor in salivary glands, and occurred in frequency of 60% in parotid gland tumors, and 50% in submandibular gland tumors, and 25% in sublingual gland tumors. Histopathologically, pleomorphic adenoma is composed of epithelial cells and mesenchymal tissues, and called 'mixed tumor' because of morphological divergency. The cell structures of luminal area are composed of polyhedral and cuboidal secretory epithelial cells and modified myoepithelial cells around it, and mesenchymal tissue is composed of some myoepithelial cells and stromal tissue. In stromal tissue, myxoid change, chondroid change, or hyalinization can be seen even if bone tissue. In many studies, tumor cells of pleomorphic adenoma containing modified myoepithelial cell participate in synthesis of glycosaminoglycans. In this study, tissue sample of pleomorphic adenoma of human salivary gland were obtained from 20 surgical specimens, and all specimens were routinely fixed in 10% formalin and embedded. Serial 4-8${\mu}m$ thick sections were cut from paraffin blocks. The histopathologic evaluation was done with light microscopy. And, with immunohistochemical staining, characteristics of glycosaminoglycan were observed. And, for biochemical analysis of glycosaminoglycan, isolation of crude glycosaminoglycan from tumor tissue and immuno-blot analysis were carried out. With transmission electromicroscopy, tumor cells and biologic behavior of pleomorphic adenoma were observed with distribution and expression of glycosaminoglycan in tumor cells, The results were obtained as follows: 1. In immunohistochemical study, chondroitin 4-sulfate is highly postively stained in myxoid stromal tissue, and chondroitin 6-sulfate is highly positively stained in chondroid mesenchymal tissue, both glycosaminoglycans are positively stained in non-luminal cell of ductal area. 2. Dermatan sulfate and keratan sulfate is positively stained in periductal non-luminal tumor cells. 3. In immunohistochemical study, heparan sulfate is weakly stained in luminal cells and non-luminal cells around duct, and chondroid mesenchymal tissue. 4. In transmission electromicroscopic view, the tumor cells are composed of modified myoepithelial cells, and contain many microfilaments and well developed rough endoplasmic reticulum. 5. In Immuno-Blot analysis, the expression of glycosaminoglycans is expressed mostly in chondroitin 6-sulfate and chondroitin 4-sulfate. From the results obtained in this study, tumor cells of pleomorphic adenoma are composed of modified myoepithelial cells, and glycosaminoglycans of chondroitin 4-sulfate and chondroitin 6-sulfate mostly participate in the development of pleomorphic adenoma, but dermatan sulfate, keratan sulfate and heparan sulfate glycosaminoglycans were expressed variably.
본 연구는 수산염법에 의해 화학적으로 균일하며 고순도인 미립의 $(Ba_{1-X}Sr_X)ZrO_3$ 분말을 합성하고 합성된 분말의 미세구조와 유전특성을 조사하여 공진주파수의 온도계수$({gamma}_f)$가 안정한 $(Ba_{1-x}Sr_x)Zr0_3$의 최적 합성조건을 규명하고자 하였다. 6가지 조성의 $(Ba{_1-X}Sr_x)ZrO_3$ (X=0, 0.2, 0.4, 0.6, 0.8, 1) 화합물을 수산염법으로 얻은 후 이를 $1000^{\circ}C$에서 하소하여 결정질 $(Ba_{1-X}Sr_X)ZrO_3$ 분말을 합성하였다. 합성한$(Ba_{1-x}Sr_x)Zr0_3$ 분말은 구형으로 $0.2 {mu}m$이하의 평균 입경을 가졌으며, ${\tau}_c$는 Ba에 대해 Sr이 0.5 정도 치환된 조성에서 0이 되는 조성을 유추할 수 있었다.
본 논문에서는 실시간 동영상 부호화를 위한 효과적인 비트율 제어 방법을 제안하고 하드웨어로 구현한다. 제안하는 비트율 제어는 각 기본유닛 마다 R-D 파라미터 갱신에 의해 많은 연산 처리를 필요로 하는 이차원 R-D 모델을 사용하지 않고, 프레임의 평균 복잡도 가중치를 이용한 Qstep 결정 모델을 사용함으로써 연산량을 감소시킨다. 또한 적은 연산량과 빠른 MAD 예측을 위해 부호화된 기본유닛을 기반으로 영상의 공간적 및 시간적 상관관계를 이용하여 MAD를 예측한다. 제안하는 비트율 제어는 프레임 레벨 MAD 예측과 매크로블록 레벨 MAD 예측, GOP 비트 할당, 프레임 비트 할당, 가상버퍼, Qstep 결정 모델, 비트율 제어 파라미터 갱신, QP 결정 모듈을 포함하며 총 8개의 모듈로 구성된다. 비트율 제어 하드웨어는 Verilog-HDL을 이용하여 설계하였으며, Synopsys사의 Design Compiler를 이용하여 UMC 공정 $0.18{\mu}m$ 셀 라이브러리로 합성한 결과, 최대 동작 주파수는 108 MHz이고, 게이트 수는 19.1k이다. 실험 결과로부터 제안한 구조는 기존 구조 보다 게이트 수가 85% 감소하였고, 매크로블럭 당 QP를 결정하는데 평균 220 사이클 수가 소요되어 기존 구조보다 64% 단축됨을 확인하였다.
International Journal of Aeronautical and Space Sciences
/
제8권1호
/
pp.10-20
/
2007
For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.