• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.647-656
• /
• 2008

In this paper, we present interference power distribution results when radio frequency identification(RFID) and ubiquitous sensor network(USN) systems share the $908.5{\sim}914MHz$ frequency bands. Average interference powers are obtained by simulation and statistical analysis, respectively. Simulation results are then verified by statistical analysis. According to the number of interferers and the diameter of the protection area, the cumulative density functions(CDFs) of interference power are simulated under the various conditions. From the simulation results, the probability that both USN and RFID systems meet the required maximal interference power levels is 95 % on condition that there are 1 low revered RFID reader and several USN nodes and that the minimum distance between a RFID reader and an USN node is greater than 1 m. Our results can be used as an basic research for coexistence analysis of RFID and USN systems in the $908.5{\sim}914MHz$ frequency bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.359-365
• /
• 2018

Herein, electromagnetic shielding structures to reduce the external noise coupling to printed spiral coils (PSCs) and a design method for improving the bandwidth of shielded PSCs have been proposed. It has been demonstrated that the bandwidth of shielded PSCs is limited due to the parasitic capacitance between the coils and the shielding structures and is confirmed by the transfer function simulation of the shielded PSCs with a transmission line as the radio-frequency interference noise source. A design method for the bandwidth improvement of the shielded PSCs has been proposed based on the equivalent circuit model analysis and the case studies depending on PSC designs with a three-dimensional field simulation. With the design method, an optimized shielded PSC design has been presented and successfully confirmed by experimental verification in that the optimized design results in a significant bandwidth improvement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.1-5
• /
• 2011

We present the Multi-band orthogonal frequency division multiplexing ultra-wideband (MB-OFDM UWB) technology for increasing the transmission reach of wireless speaker systems. The proposed scheme adopts the Reed-Solomon coding for preventing the random error perfectly and shows the SNR gain in low bit error rate (BER) especially. So, we can increase the maximum reach of MB-OFDM UWB technology since the receiver sensitivity is improved. The simulation environment includes most effects of realistic channel environments such as Additive White Gaussian Noise (AWGN), CM1 channel model, Sampling frequency offset (SFO), Carrier frequency offset (CFO) to improve the simulation accuracy. The simulation results show that the proposed scheme can give a maximum 2 dB SNR gain and increase the transmission reach up to 12.6m.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.1-7
• /
• 2021

Demand for Ti-6Al-4V alloy is increasing in various industries because of its superior strength to weight and high-temperature strength properties. However, due to its low formability at room temperature, it is formed at high temperature, where its productivity and efficiency are low. The current high-temperature forming method has many limitations because it involves heating the specimen by heating the lower mold. It is expected that a process using high frequency induction heating, which can locally heat the product, can improve its productivity. In addition, time and cost can be saved if the process is simulated in advance with a reliable analysis. In this paper, we verified the reliability of the analysis by comparing the result of heating the specimen to 850 ℃ by high frequency induction heating and the temperature obtained through the co-simulation analysis.

• International Area Studies Review
• /
• v.13 no.1
• /
• pp.81-102
• /
• 2009

The discussion of the relationship between macro-economic variables is very important research topic. the most economic variables discussed in connection with the liberalization of capital is the exchange rate and stock prices and these two variables have a relationship of mutual influence are identified. However, the results on the time frequency and the time span of a variable appear differently. Therefore, the purpose of this research describes a cause that the result of prior research varied and presents more reliable research methodology. In this research, when the time frequency and span varied, the VAR analysis of the exchange rate and stock prices appeared differently. So, we use the Monte Carlo simulation method in order to performing our purpose. Our research supports the existing research said the ratio that each coefficient VAR model contained 95% confidence interval of estimated coefficient in Monte Carlo simulation is higher when it is applied more the long term and frequent observation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.77-83
• /
• 2010

This paper presents the dual resonance PIFA(Planar Inverted F-Antenna) which satisfies the requirements of the 802.11n standard at both 2.4 GHz and 5 GHz frequency bands. Patch for 2.4 GHz and U-Type slot for 5 GHz were used for dual resonance, respectively. In this paper, the characteristics of an antenna were investigated by varying locations of short plate and feed point, the width of the short plate, the thickness and the location of U-Type slot. To investigate the characteristics of the PIFA, HFSS(High Frequency Structure Simulation) for the simulation was used. And the measurement results of a fabricated PIFA were compared with the simulated ones. The measurement and simulation results show that good dual resonance characteristics as the thickness of U-type slot decreases and when the location of U-type slot is far from the feed point.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.558-565
• /
• 2013

In this paper, modeling and simulation for performance analysis of high resolution SAR system has been carried out in the time, frequency and numeric domain using ADS Ptolemy simulation tool of Agilent corporation. SAR system consists of antenna, controller and transceiver. Error parameters affecting SAR system performances have been defined, modeled and simulated such as phase noise of frequency synthesizer, amplitude and phase characteristic of TWTA, sampling frequency of waveform generator and I/Q imbalance. Finally, the development requirements of SAR system based on the impulse response function have been derived.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this paper, a semi-infinite array analysis method is proposed to analyze the defects that may occur during the fabrication of the frequency selective radome. In the analysis of N×N finite array structure using 3D analysis software, much analysis time and memory are required, whereas the semi-infinite array structure analysis proposed in this paper can predict relatively accurate electromagnetic performance while reducing the analysis time. In comparison with the results of the periodic simulation, the simulation of the semi-infinite array structure confirmed the error within ±3%. To verify the results of the simulation, the results were compared with the measured results, and the same tendency at the point of performance change and similar performance degradation at the band of interest were investigated. Using the proposed semi infinite array structure analysis, it is confirmed that the analysis of defects in the electromagnetic periodic structure is possible.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1535-1544
• /
• 2017

Advances in FPGA technology have enabled fast real-time simulation of power converters, filters and loads. FPGA based HIL (Hardware-In-the-Loop) simulators have revolutionized control hardware and software development for power electronics. Common time step sizes in the order of 100ns are sufficient for simulating switching frequency current and voltage ripples. In order to keep the time step as small as possible, ideal switching function models are often used to simulate the phase legs. This often produces inferior results when simulating the discontinuous conduction mode (DCM) and disabled operational states. Therefore, the corresponding measurement and protection units cannot be tested properly. This paper describes a new solution for this problem utilizing a discrete-time PI controller. The PI controller simulates the proper DC and low frequency AC components of the phase leg voltage during disabled operation. It also retains the advantage of fast real-time execution of switch-based models when an accurate simulation of high frequency junction capacitor oscillations is not necessary.

• Earthquakes and Structures
• /
• v.26 no.3
• /
• pp.239-249
• /
• 2024

A new layered shear continuum model box was developed to address the dynamic response issues of buried oil and gas pipelines under multi-point excitation. Vibration table tests were conducted to investigate the seismic response of buried pipelines and the surrounding soil under longitudinal multi-point excitation. A nonlinear model of the pipeline-soil interaction was established using ABAQUS finite element software for simulation and analysis. The seismic response characteristics of the pipeline and soil under longitudinal multi-point excitation were clarified through vibration table tests and simulation. The results showed good consistency between the simulation and tests. The acceleration of the soil and pipeline exhibited amplification effects at loading levels of 0.1 g and 0.2 g, which significantly reduced at loading levels of 0.4 g and 0.62 g. The peak acceleration increased with increasing loading levels, and the peak frequency was in the low-frequency range of 0 Hz to 10 Hz. The amplitude in the frequency range of 10 Hz to 50 Hz showed a significant decreasing trend. The displacement peak curve of the soil increased with the loading level, and the nonlinearity of the soil resulted in a slower growth rate of displacement. The strain curve of the pipeline exhibited a parabolic shape, with the strain in the middle of the pipeline about 3 to 3.5 times larger than that on both sides. This study provides an effective theoretical basis and test basis for improving the seismic resistance of buried oil and gas pipelines.