• 자원환경지질
• /
• 제36권3호
• /
• pp.201-212
• /
• 2003

한반도 남동부의 경상분지에 한국지질자원연구원의 지진관측망을 비롯한 관측소들이 급격히 증가함에 따라, 지진관측의 능력이 최근에 들어 크게 향상되었다. 그러나, 빈번한 중소규모의 화약발파에 의한 진동이 다수 관측되고 있다. 따라서, 이 지역에서 자연지진과 발파에 의한 인공지진의 식별이 중요한 문제로 부상하였다. 이 지역에서의 인공지진과 자연지진의 적절한 식별법을 확립하기 위하여 소규모의 지역지진 43개와 이에 대응되는 인공지진 43개를 선정하였다. 이 연구에서는 주파수 영역에서 Pg파, Sg파 및 Lg파의 스펙트럼 진폭비를 이용하는 기법들이 폭 넓게 검토되었다. 그들 중 Pg/Lg 스펙트럼 진폭비를 이용하는 방법이 가장 좋은 식별법으로 나타났다. 또한, 식별능력을 향상시키기 위하여 Pg/Lg 스펙트럼비에 다변량 판별분석법을 적용하였다. 거리보정이 안된 수직성분에 비하여 거리에 대한 감쇠효과를 보정한 3성분의 Pg/Lg비에 판별분석법을 적용했을 때의 판별능력은 뚜렷한 증가를 보인다. 주파수 대역 4-l4Hz의 범위에서, 거리 보정한 3성분의 Pg/Lg비에 대한 판별분석의 결과 총 분류비율은 0.89%에 불과한 것으로 나타난다.

• 조명전기설비학회논문지
• /
• 제28권4호
• /
• pp.29-35
• /
• 2014

The purpose of high frequency transformer in the inverter is to reduce the voltage and current stresses of switch components when it operates at the large conversion ratio. But the loss of transformer is the major contributor in the efficiency of inverter. This paper presents the method of core design to minimize the loss of transformer. The total loss of transformer is minimized by adjusting the effective cross-sectional areas of core. The component ratio of losses are compared by using the finite-element analysis.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.807-812
• /
• 2020

본 논문은 여러 음원신호가 혼합된 환경에서 목적으로 하는 음원신호만을 분리하기 위하여 마이크로폰을 사용한 블라인드 음원분리 알고리즘을 제안한다. 제안하는 알고리즘은 독립성분분석 방법을 기반으로 한 주파수영역 표현모델이다. 따라서 2 음원에 대한 주파수영역 독립성분분석의 실제 환경에서의 유효성 검증을 목적으로, 음원의 종류를 변경하여 주파수영역 독립성분분석을 실행하여 음원분리를 실시하여 그 향상효과를 검증한다. 파형에 의한 실험결과로부터 원래의 파형과 비교하여 2채널의 음원신호를 깨끗하게 분리할 수 있음을 명확히 하였다. 또한 목표 신호 대 간섭 에너지비율을 사용하여 비교한 실험 결과로부터 본 논문에서 제안한 알고리즘의 음원분리 성능이 기존의 알고리즘에 비하여 성능이 향상되었다는 것을 알 수 있었다.

• 전기의세계
• /
• 제28권1호
• /
• pp.53-58
• /
• 1979

In the microwave heating system, a ferroresonant transformer is used to regulate the magnetron power fluctuation. For the simplification, nonlinear characteristics of the transformer and the magnetron are idealized to be piecewise linear. Dipped peak shape of the magnetron current is explained qualitatively by considering the fundamental and third harmonic frequency components in the circuit. Design equations providing the values of the leakage inductance, turn ratio of the transformer and the capacitance are derived analytically by cosnidering the fundamental frequency component only. The ferroresonant transformer is designed to obtain a required regulation and high input power factor from the derived design equations, and analytical calculations are compared with experimental measurements.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.207-213
• /
• 1999

Thirty-eight glutinous rice varieties were classified into nine groups on the scatter diagram by the upper two principal components (56% contribution to the total information) based on eleven physicochemical characteristics including the viscograms and physical properties of cooked rice. The first principal component was the factor mainly associated with the viscogram characteristics of rice flour emulsion and the second was the factor chiefly related to the physical properties of cooked rice and water absorbability of rice grain. Indica glutinous rices were clearly distinguished from japonica ones by the first principal component score. Javanica glutinous rices were widely distributed on the intermediate zone between indica and japonica or on several japonica rice groups. Significant positive or negative correlations were found among water absorption rates of rice grain, physical properties of cooked rice, and viscogram characteristics of rice flour. Especially in japonica glutinous rices, the breakdown and setback viscosities of rice flour were closely associated with the alkali digestion value of milled rice and the stickiness of cooked rice. The frequency ratio of short glucose chains (A-chain) to intermediate glucose chains (B-chain), the ratio of B- chains to long glucose chains (C-chain) and the relative frequency of A- or B-chain fractions representing the amylopection structure of rice starch was closely associated with the breakdown and setback viscosities of rice flour.

• 한국통신학회논문지
• /
• 제16권2호
• /
• pp.172-179
• /
• 1991

In this paper we have proposed an efficient coding algorithm using directional filtering. First an image is transformed by using DCT which has better energy compaction and then the transformed image is divided into a low frequency component and several high frequency components. The transformed coefficients of each parts are transmitted respectively by using huffman code and these are transformed inversely at receiver. For the directional components total edge images are reconstructed at zero crossing points. We are able to reduce the amount of data by getting of complex component and making directional angles 90. As a results, this proposed method is better than that of Kunt in respect of processing time and memories. We have 38dB of image quality with objective measurement of PSNR and 0.26bpp of compression ratio which is acceptable.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.90-96
• /
• 2009

The loading condition of actual construction works is complex. The shear effect of mixed-mode load component are crack propagation mechanism in step larger than the crack initial mechanism. Therefore, in this study received a mixed-mode loading on fatigue crack stress ratio on crack propagation path and speed of progress to learn whether stress affects crack propagation. ${\Delta}$ P a constant state of fatigue tests in Mode I, II give the same stress ratio, frequency 10Hz, sinusoidal waveform was used. A lower stress ratio fatigue crack propagation angle is small. This is less affected by the Mode II. Therefore, a mixed-mode fatigue crack propagation is to progress by the Mode. Stress ratio in a mixed mode crack in the path of progress and found a lot of impact.

• 한국멀티미디어학회논문지
• /
• 제8권6호
• /
• pp.753-760
• /
• 2005

This paper introduces a variable step-size adaptive algorithm for blind source separation. From the frequency characteristics of mixed input signals, we need to adjust the convergence speed regularly in each frequency bin. This algorithm varies a step-size according to the magnitude of input at each frequency bin. This guarantee of the regular convergence in each frequency bin would become more efficient in separation performances than conventional fixed step-size FDICA. Computer simulation results show the improvement of about 5 dB in signal to interference ratio (SIR) and the better separation quality.

• 수산해양기술연구
• /
• 제33권3호
• /
• pp.248-258
• /
• 1997

The analytical solutions of the Fraunhofer Diffraction(FD) theory and the principle for measurement of the dispersion relation of plasma wave is presented. Especially, the method for measurement of low-frequency wave is discussed. The wavenumbers of the density fluctuations are obtained from the curve fitting between the expremental FD profile and theoretical one for each frequency component. In measurement of the wavenumber of the low -frequency region, the information of the wavenumber is easily obtained from the ratio of the intensity at = 0 to the intensity at =0.5. The millimeter wave FD apparatus was designed to measure low-frequency density fluctuations. The determined wavenumbers are in the range of =0.1~ 1.0cm. Thus, the millimeter wave FD method was shown to be useful for the measurement of low-frequency density fluctuations, which are impossible to be measured by using a convention. Thomson scattering. The obtained dispersion relations will be useful information for plasma waves.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.397-405
• /
• 2022

Computed radiography (CR) systems, which convert an analog signal recorded on a cassette into a digital image, combine the characteristics of analog and digital imaging systems. Compared to digital radiography (DR) systems, CR systems have presented difficulties in evaluating system performance because of their lower detective quantum efficiency, their lower signal-to-noise ratio (SNR), and lower modulation transfer function (MTF). During the step of energy-storing and reading out, a baseline offset occurs in the edge area and makes low-frequency overestimation. The low-frequency offset component in the line spread function (LSF) critically affects the MTF and other image-analysis or qualification processes. In this study, we developed the method of baseline correction using mathematical morphology to determine the LSF and MTF of CR systems accurately. We presented a baseline correction that used a morphological filter to effectively remove the low-frequency offset from the LSF. We also tried an MTF evaluation of the CR system to demonstrate the effectiveness of the baseline correction. The MTF with a 3-pixel structuring element (SE) fluctuated since it overestimated the low-frequency component. This overestimation led the algorithm to over-compensate in the low-frequency region so that high-frequency components appeared relatively strong. The MTFs with between 11- and 15-pixel SEs showed little variation. Compared to spatial or frequency filtering that eliminated baseline effects in the edge spread function, our algorithm performed better at precisely locating the edge position and the averaged LSF was narrower.