• 제목/요약/키워드: frequency bands

검색결과 1,102건 처리시간 0.023초

격리구조 기법을 이용한 안테나 격리도 변화 분석 (Analysis of Antenna Isolation Using Decoupling Structure)

  • 이정훈;김지훈;김민기;김형훈;김형동
    • 한국전자파학회논문지
    • /
    • 제26권12호
    • /
    • pp.1044-1049
    • /
    • 2015
  • 본 논문에서는 격리도 향상 공진기(isolating resonator)를 사용하여 격리도를 향상시킨 안테나를 제안하였다. Wi-Fi 주파수(2.4~2.5 GHz) 대역에서 동작하는 두 개의 루프 안테나는 그라운드의 센터를 중심으로 대칭으로 설계되었고, 이격거리가 매우 가깝다. Wi-Fi 주파수 대역에서의 격리도 저하 특성을 개선하기 위해 두 안테나 사이에 격리도 향상 공진기를 삽입하였다. 제안된 격리도 향상 공진기는 슬롯타입 구조로 공진기의 사이즈 조절을 통해 격리도 특성을 향상시키고, 삽입된 커패시터($C_D$)를 통해 공진기의 공진 주파수를 이동시킴으로써 목표 주파수에서의 격리도 특성을 쉽게 향상시킬 수 있다.

Ku-대역 광대역 디지탈 위성방송용 저 잡음하향변환기 개발 (Implementation of Wideband Low Noise Down-Converter for Ku-Band Digital Satellite Broadcasting)

  • 홍도형;이경보;이영철
    • 한국전자파학회논문지
    • /
    • 제27권2호
    • /
    • pp.115-122
    • /
    • 2016
  • 본 논문에서는 디지털 위성방송을 수신하기 위하여 Ku-대역 광대역 하향변환기를 설계하였다. 설계된 저 잡음 하향변환기는 잡음 정합에 의한 3단 저 잡음 증폭회로와 10.7~12.75 GHz의 입력신호를 VCO-PLL에 의한 저 위상잡음을 나타내는 4개의 국부발진주파수(9.75, 10, 10.75 및 11.3 GHz)를 형성하고, 디지털 제어에 의하여 4-대역의 IF 주파수 채널을 선택할 수 있도록 설계하였다. 개발한 저 잡음 하향 변환기의 전체 변환이득 64 dB, 저 잡음 증폭기의 잡음지수는 0.7 dB, 출력신호의 P1dB는 15 dBm, band 1 반송주파수 9.75 GHz에서 위상잡음은 -85 dBc@10 kHz를 나타내었다. 설계한 광대역 디지털 위성방송용 하향변환기(LNB)는 국제적으로 이동하는 선박 등의 위성방송용으로 사용가능하다.

진폭 변조 거리 측정 시스템을 위한 정밀 위상차 측정부 개발 (The Phase Difference Measurement Module Development for Amplitude Modulated Range Measurement System)

  • 노형우;박정호;강일흥;최문각;김강욱
    • 한국전자파학회논문지
    • /
    • 제22권2호
    • /
    • pp.182-190
    • /
    • 2011
  • 진폭 변조를 이용한 거리 측정 시스템은 반송파를 진폭 변조하여 송수신한 신호의 진폭 변조 신호의 위상차를 사용하여 거리를 측정하게 된다. 진폭 변조 거리 측정 시스템에서 문제가 되는 안테나 간의 누설 신호 및 불요 신호에 의한 측정 오차를 최소화하기 위해 능동반사기를 사용하여 주파수 대역을 바꾸어 송신하는 방식이 제안되었다. 본 논문에서는 모호성이 없는 측정 거리를 확장하면서도 정밀한 측정을 가능하게 하는 새로운 위상측정부의 구현에 대해 설명하고 있다. 즉, 8 MHz 및 1 MHz의 두 개의 변조 주파수를 교차적으로 선택하여 변조함으로써, 150 m까지의 거리를 2 cm 이하의 오차로서 측정할 수 있게 하였다. 위상측정부는 정밀한 위상 측정을 위하여 높은 변조 주파수는 JK 플립플롭 위상차 측정기를 사용하고, 낮은 변조 주파수일 경우는 XOR 위상차 측정기를 사용하였다.

실버잉크와 점퍼구조를 사용한 신용카드 크기의 UHF & HF RFID 태그 안테나 (UHF & HF RFID Credit Card Size Tag Antenna Designs Using Silver-Ink and Jumper Structure)

  • 남세현;정유정
    • 한국전자파학회논문지
    • /
    • 제27권11호
    • /
    • pp.972-977
    • /
    • 2016
  • 본 논문에서는 920 MHz UHF(Ultra High Frequency) 대역과 13.56 MHz HF(High Frequency) 대역의 RFID 태그 안테나가 PE film에 단면에 프린트된 이중대역 태그를 설계하는 과정과 그 결과를 보여준다. 태그의 전체 크기는 일반 신용카드의 크기인 $80mm{\times}50mm$이고, 가장자리에 UHF 태그 안테나가 $76mm{\times}44mm$로 카드 크기보다 조금 작게 설계되었다. HF 대역 태그는 UHF 태그의 중앙에 $40 mm{\times}42 mm$ 크기로 상호작용을 감안하여 설계되었다. 단면에 실버잉크 Printing 기법으로 일반적인 HF용 태그와 다르게 Via를 사용하지 않고, 단면에 PE Film 위에 프린트를 한 후에 Jumper를 추가함으로써 HF 대역용 Loop 안테나와 UHF 태그와 같은 면에 설계하였다. 인식거리는 UHF 대역에서 약 6 m로 장거리에서 인식이 가능하고, HF 대역에서는 5 cm 이상으로써 두 개의 대역에서 사용이 가능한 태그로서 물류와 검증용으로 사용이 가능하다.

레일레이 패이딩 채널에서 다중 반송자 DS/CDMA 통신 시스템의 전력-전송율 적응 방식 (Power and Rate Adaptations in Multi-carrier DS/CDMA Communications over Rayleigh Fading Channel)

  • 안희준;이예훈
    • 한국통신학회논문지
    • /
    • 제30권6C호
    • /
    • pp.423-433
    • /
    • 2005
  • 다중 반송자를 사용하는 CDMA 통신 시스템에서 주파수 영역의 전력과 시간 영역의 전송율을 적응적으로 사용하는 시스템을 분석하였다. 수신단으로 부터 얻는 이상적인 채널상태 정보를 가정하고, 주파수 영역에서는 각 사용자의 부채널 중에서 가장 채널상태가 좋은 한 대역을 선택하고, 시간영역에서는 목표 수신 품질을 만족하도록 전송율을 조정한다. 단일 사용자의 경우에 평균 BER을 최소화 할 수 있는 최적의 전송 방식의 식을 유도하였다. 채널 상태 역수 법이 사용 대역의 수나, 평균 전송양이 증가할 때 최적의 알고리듬이라는 사실 또한 증명하였다. 수학적 분석과 시뮬레이션 결과 제안된 주파수 시간 적응 알고리듬을 사용한 방식이 주파수영역에서만 선택적인 방법을 사용하는 MC-CDMA 방식과 비교하여 현격히 좋은 성능을 보임을 보였다. 또한 제안된 적응형 MC-CDMA 전송방식과 기존의 RAKE 수신기를 사용하고 시간 영역에서 적응적 방식을 사용하는 DS-CDMA 시스템과 성능을 비교하였다.

담배(Nicotiana tabacum L.) 잎의 몇가지 생리적 반응에 미치는 Abscisic Acid의 영향 (Effects of Abscisic Acid on Some Physiological Responses of the Leaves in Nicotiana tabacum L.)

  • 김진성
    • Journal of Plant Biology
    • /
    • 제29권1호
    • /
    • pp.41-51
    • /
    • 1986
  • The plants of Nicotiana tabacum L. cv. NC2326 were germinated in 10 cm D$\times$20 cm H polyethylene pot, and sand-cultured with Hoagland solution near by the window of laboratory room(26$\pm$5$^{\circ}C$). The growing plants were sprayed with various concentrations of ABA around 9 : 00 a.m. once in every two days for 12 weeks in summer. As the results, frequency of stomatal number, stomatal opening, chlorophyll content, respiration rate, and protein content in the leaves were decreased with the increasing of concentrations of ABA, respectively. The plant growth was inhibited by exogenous ABA, but leaf abscission was not found during the experimental period. The ratio of three to one in chlorophyll a to b was not altered by exogenous ABA. All the stomata were closed within three minutes by 100 $\mu\textrm{g}$ ml-1 ABA and within seven minutes by 1-10 $\mu\textrm{g}$ ml-1 ABA after the spraying of ABA, and then reopended after a few hours in 1-10 $\mu\textrm{g}$ ml-1 ABA and after 24 hours in 100 $\mu\textrm{g}$ ml-1 ABA. The polar movement of chloroplast within the guard cells was found in the higher concentrations of 10 and 100 $\mu\textrm{g}$ ml-1 ABA, but not found in the lower concentrations than 1 $\mu\textrm{g}$ ml-1 ABA. During the night and weak light, it was fond that the inhibition of respiration rate by the higher concentration of ABA was owing to firstly the stomatal closure by the spraying of ABA and secondly the decrease of stomatal frequency by the inhibition of stomatal development with exogenous ABA for the long period of 12 weeks. In the band number of leaf protein by the electrophoresis, most of the protein bands were disappeared by the higher concentration of 100 $\mu\textrm{g}$ ml-1 ABA, but were not altered by the lower concentration of ABA in comparison with control.

  • PDF

Highly Linear Wideband LNA Design Using Inductive Shunt Feedback

  • Jeong, Nam Hwi;Cho, Choon Sik;Min, Seungwook
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권1호
    • /
    • pp.100-108
    • /
    • 2014
  • Low noise amplifier (LNA) is an integral component of RF receiver and frequently required to operate at wide frequency bands for various wireless system applications. For wideband operation, important performance metrics such as voltage gain, return loss, noise figure and linearity have been carefully investigated and characterized for the proposed LNA. An inductive shunt feedback configuration is successfully employed in the input stage of the proposed LNA which incorporates cascaded networks with a peaking inductor in the buffer stage. Design equations for obtaining low and high impedance-matching frequencies are easily derived, leading to a relatively simple method for circuit implementation. Careful theoretical analysis explains that input impedance can be described in the form of second-order frequency response, where poles and zeros are characterized and utilized for realizing the wideband response. Linearity is significantly improved because the inductor located between the gate and the drain decreases the third-order harmonics at the output. Fabricated in $0.18{\mu}m$ CMOS process, the chip area of this wideband LNA is $0.202mm^2$, including pads. Measurement results illustrate that the input return loss shows less than -7 dB, voltage gain greater than 8 dB, and a little high noise figure around 6-8 dB over 1.5 - 13 GHz. In addition, good linearity (IIP3) of 2.5 dBm is achieved at 8 GHz and 14 mA of current is consumed from a 1.8 V supply.

Picosecond Dynamics of CN--Ligated Ferric Cytochrome c after Photoexcitation Using Time-resolved Vibrational Spectroscopy

  • Kim, Joo-Young;Park, Jae-Heung;Chowdhury, Salina A.;Lim, Man-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권12호
    • /
    • pp.3771-3776
    • /
    • 2010
  • The dynamics of the $CN^-$-ligated ferric cytochrome c (CytcCN) in $D_2O$ at 283 K following Q-band photoexcitation at 575 nm was observed using femtosecond time-resolved vibrational spectroscopy. The equilibrium vibrational spectrum of the CN stretching mode of CytcCN shows two overlapping bands: one main band (82%) at $2122\;cm^{-1}$ with $23\;cm^{-1}$ full width at half maximum (fwhm) and the other band (18%) at $2116\;cm^{-1}$ with $7\;cm^{-1}$ fwhm. The time-resolved spectra show bleaching of the CN fundamental mode of CytcCN and two absorption features at lower energies. The bleach signal and both absorption features are all formed within the time resolution of the experiment (< 200 fs) and decay with a life time of 1.9 ps. One transient absorption feature, appearing immediately red to the bleach signal, results from the thermal excitation of low-frequency modes of the heme that anharmonically couple to the CN fundamental mode, thereby shifting the CN mode to lower energies. The shift of the CN mode decays with a lifetime of 2 ps, equivalent to the time scale for vibrational cooling of the low-frequency heme modes. The other transient absorption feature, which is 3.3 times weaker than the bleach signal and shifted $27\;cm^{-1}$ toward lower energies, is attributed to the CN mode in an electronically excited state where the CN bond is weakened with a lowered extinction coefficient. These observations suggest that photoexcited CytcCN mainly undergoes ultrafast radiationless relaxation, causing photo-deligation of $CN^-$ from CytcCN highly inefficient. As also observed in $CN^-$-ligated myoglobin, inefficient ligand photodissociation might be a general property of $CN^-$-ligated ferric hemes.

감음성 난청 보상을 위한 부밴드 구조 디지털 보청기 설계 (A Subband Structured Digital Hearing Aid Design for Compensating Sensorineural Hearing Loss)

  • 박조동;최훈;배현덕
    • 한국음향학회지
    • /
    • 제24권5호
    • /
    • pp.238-247
    • /
    • 2005
  • 본 논문에서는 디지털 보청기의 보상필터와 적응 궤환제거기의 부밴드 설계기법을 다룬다 감음 신경성 난청은 주파수 대역에서 비선형 특성을 보이는 가청 한계값 (hearing thresholds)을 가지며 시변하는 궤환경로에 의해 보상이 어렵다. 그러므로 디지틸 보청기는 주파수 대역별 비선형적 이득조정이 가능하며 반향을 빠르게 제거할 수 있는 보상기를 필요로 한다. 제안한 디지털 보청기에서 보상필터는 부밴드 구조에서 적응 시스템 식별기법을 이용하여 설계되며 적응 궤환제거기는 부밴드 인접투사 알고리즘을 이용하여 설계된다. 설계된 보상필터는 비선형 이득을 각 부밴드에서 조정할 수 있으므로 보다 정확한 이득보상이 가능하다. 그리고 부밴드 적응필터를 사용하는 궤환제거기는 빠른 수렴속도를 가진다. 설계된 보상필터는 주파수 대역별로 비선형적 이득보상이 가능하다. 그리고 적응 궤환제거기는 원치 않은 반향을 빠르게 제거할 수 있다. 제안한 보상필터의 성능을 컴퓨터 시뮬레이션을 통해 이전 방법의 성능과 비교하여 입증한다.

공동주택 중량바닥충격음 현장측정을 통한 차단성능 평가방법의 비교검토 연구 (A Study of Rating Method Comparison for Heavy-weight Floor Impact Sound based on the Field Test Data in Apartment Houses)

  • 신훈;백건종;국찬;송민정;김선우
    • KIEAE Journal
    • /
    • 제10권5호
    • /
    • pp.187-194
    • /
    • 2010
  • Heavy-weight floor impact sound insulation performance criteria have been effective in Korea since the regulation which enforces the standard thickness of slabs in domestic apartment houses should be constructed by 180mm or 210mm was adopted. But every slab does not satisfy this criteria. So, review on existing floor impact sound insulation performance is needed to propose some basic materials for the revision of rating method. To achieve this goal, 63 field test data were checked and analyzed. The results of this study are as follows ; 1) The 210mm thickness slab has the characteristics of deeper level decrease above 120Hz frequency band than that of 180mm thickness slab's. 2) 27.5% of 180mm thickness slabs were satisfied the floor impact sound insulation performance criteria, whereas 65% of 210mm slabs do. 3) Among the main contribution frequency bands for the determination of single rating index, 63Hz was shown as the most contributive band in 210mm slabs. 4) In comparison of single rating index between bang machine test and ball test. there is a big difference between the two and this phenomenon is frequent in 210mm slab results. 5) Rating Methods for the analysis of cross-correlation between the amount of rating, the usefulness of the arithmetic mean could be secured.