• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2770-2776
• /
• 2011

Mutual Interference scenarios between Wireless Broadband (WiBro) and Wireless LAN (WLAN) in DTV bands are assumed. Co-channel interference and adjacent channel interference are respectively evaluated in terms of carrier to interference ratio (C/I) by using Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) based on the Monte-Carlo simulation method. For the simulation, three frequencies such as 185 MHz, 481 MHz and 687 MHz are chosen. Analysis results indicate that interference situation of using frequency of 185 MHz is the worst case, which requires longer protection distance between WiBro MS and WLAN User Equipment (UE), lower transmit power of WiBro Mobile Station (MS) and WiBro Base Station (BS) and WLAN UE and larger guard band. Comparing to cases of using frequency of 185 MHz and 481 MHz, interference situation of using frequency of 687 MHz is slighter. Therefore, using frequency of 687 MHz is easier for coexistence between WiBro and WLAN. Analysis results can be used as reference and guideline when planning the deployment of WiBro and WLAN in DTV bands.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.23-30
• /
• 2016

In this paper, for the pratical building envoronments, the propagation properties of the electromagnetic waves of the sub-1GHz bands, including the 447MHz, 868MHz, and 715MHz, and the 2.4GHz band are experimentally observed in therms of the received signal strength indicator (RSSI) value. The compasion of the frequency bands can be utilized to efficiently construct the wireless sensor networks (WSN) for the building automation control. In order to measure the RSSI values in the building, an RSSI measurement system is first designed, in which the master part can transmit data packets and measure the corresponding RSSI values, and the slave part can respond the received data packets. Using the measurement system, the RSSI values are then experimentally measured at four types of building enviroments. From the experimental result analysis, we could notice that the sub-1GHz, especially the 447MHz band, showd a good communication performance for the building environment and could provide an efficient WSN construction when the data rate is relatively low.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.347-366
• /
• 2015

GPS and strong-motion sensors are broadly used for the monitoring of structural health and Earth surface motions, focusing on response of structures, earthquake characterization and rupture modeling. Several studies have shown the consistency of the two data sets within at certain frequency (e.g., 0.03

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.561-564
• /
• 1998

This paper evaluated autonomic nervous system function in 23 patients with syncope and a positive tilt test result, 21 with a negative test result, and 19 healthy controls. Indexes of heart rate variability were measured during supine resting, immediately afte rtilt-up, standing rsting, immediately before syncope and immediately after tiltdown. There were no significant differences among the groups in any of the indexes of heart rate varability over the 24-hour holter recordings. In patients with a positive tilt result, tilting gaused a decrease in low-frequency (LF) immediately before syncope and incsrease in high-frequency (HF) bands immediately before. In patients with a negative tilt result, tilting caused a decrease in low-frequency (LF) immediately before syncope and decrease in high-frequency (HF) bands immediately before, different from positive tilt results. Our findings showed that patients with vasovagal syncope have no chronic differences from normal subjects in autonomic nervous system activity, but that these patients respond differently to the orthostatic stimulus.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.2059-2064
• /
• 2004

Texture analysis is an important role for automatic visual insfection. This paper presents an application of wavelet extension and Gray level co-occurrence matrix (GLCM) for detection of defect encountered in textured images. Texture characteristic in low quality images is not to easy task to perform caused by noise, low frequency and small dimension. In order to solve this problem, we have developed a procedure called wavelet image extension. Wavelet extension procedure is used to determine the frequency bands carrying the most information about the texture by decomposing images into multiple frequency bands and to form an image approximation with higher resolution. Thus, wavelet extension procedure offers the ability to robust feature extraction in images. Then the features are extracted from the co-occurrence matrices computed from the sub-bands which performed by partitioning the texture image into sub-window. In the detection part, Mahalanobis distance classifier is used to decide whether the test image is defective or non defective.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.178-182
• /
• 2003

In this paper, we designed a loading sleeve monopole operating at PCS and IMT-2000 frequency bands using the structure of the broadband loading sleeve monopole. The length of the designed antenna is lower than that of the helical antenna coupled with a whip used in commercial PCS handsets. The length and diameter of the designed antenna are 38 mm and 8 mm, respectively. The designed loading sleeve monopole is fabricated and investigated experimently. The VSWR is less than 1.5 in the PCS and IMT-2000 frequency bands(1750 MHz~2170 MHz) and gain is 3.5 dBi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1370-1377
• /
• 1999

A technique for an efficient video coding based on characteristics of human visual response in relation to motion is described in this paper. An input frame is segmented into low frequency bands and high frequency bands by wavelet transformation. The non-sensitivity parts of the segmented bands are removed according to spatial and directional frequency sensitivity, which is related to motion property in a frame. Experimental results of the proposed method show good performance in PSNR with keeping on without degradation of subjective quality with 21-30:1 coding rate.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.112-119
• /
• 2010

We present a useful design for a free access mat which supports two frequency bands of 2.4 GHz and 5 GHz. The free access mat is a sheet-shaped waveguide which consists of a tightly coupled double-layered microstrip resonator array. It provides easy access for devices in short-range wireless communications. Interference is a common problem with conventional applications which use free space transmission. Our proposed wireless access system uses a subsidiary waveguide, the free access mat. Wireless devices are proximately coupled to the free access mat through which the coupled electromagnetic (EM) wave transmits. The arrival domain of the EM wave of an application is therefore limited to an area close to the free access mat. Wireless devices can be coupled to the free access mat at an arbitrary position without contact. We previously presented a free access mat for a single frequency band. This paper presents a free access mat for the two frequency bands of 2.4 GHz and 5 GHz. The free access mat uses a ring patch resonator array which is easily excited by typical antennas and is resistant to interference. These characteristics are demonstrated by numerical simulation and confirmed by experiment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.73-81
• /
• 2013

In this paper, we have proposed the interference analysis method which uses both an interference probability model at the PHY layer of RFID system and the DTMC model at the MAC layer of USN system. Using the proposed method, we have performed sharing analysis between passive RFID and USN systems at the Korean RFID/USN frequency bands. If 1% performance degradation of USN system is allowed, RFID and USN systems can share the frequency bands where channel number is greater or equal to 20 on condition that radius of protection area is greater than 300 m.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.177-184
• /
• 2023

In order to reserve frequency bands for stable operation of the Korean Positioning System (KPS), it must be demonstrated that the impact of interference caused by KPS on other services operating in the same bands is tolerable. The International Telecommunication Union (ITU) provides the radio regulations and a compatibility assessment methodology for the coexistence of different services in limited frequency resources. The purpose of this paper is to investigate the radio regulations regarding the compatibility issues between the KPS and other services sharing the same frequency bands. The results of the investigation show that the RNSS system can be operated in the L5-band under the condition that the Power Flux Density (PFD) and Aggregated Equivalent PFD (AEPFD) thresholds specified in the radio regulations are met. In addition, the ITU recommends that the interference-to-noise ratio (INR) protection criteria be met to prevent degradation of the performance of radar systems operating in the L2/L6-band. In the case of the S-band, coordination of allocations for RDSS space stations with respect to terrestrial services is not required if the PFD does not exceed regulated thresholds regulated by ITU.