• 한국철도학회논문집
• /
• 제15권3호
• /
• pp.294-299
• /
• 2012

철도운송은 오랜 기간 동안 도로운송, 해상운송, 항공운송보다 친환경 운송수단으로 인식되어 왔다. 하지만 최근 디젤유를 사용하는 점화기관에서 배출되는 오염물질이 대기오염의 주범으로 밝혀지면서 사회적 문제로 인식되고 있으며 녹색성장을 위한 정부 정책으로 철도분야도 온실가스 배출의 감축 의무를 피할 수 없을 것으로 전망되고 있다. 또한, 지속적인 고유가는 운영비를 상승시켜 운영기관에 큰 부담이 되고 있다. 본 논문에서는 온실가스 배출 감소와 유류비 절감을 위해 운영기관 입장에서 화물열차의 경제속도를 결정하기 위한 방법론을 제안한다. 경제속도를 추정하기 위해 유류비, 화물열차의 시간가치, 탄소세를 고려하여 비용 함수를 추정하였다. 비용 함수를 바탕으로 화물열차의 경제속도를 도출하기 위한 식을 제안하고 유류비, 화물열차의 시간가치, 탄소세의 변화가 속도에 미치는 영향을 알아보기 위해 민감도 분석을 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.437-445
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed of the train but also to reduce the vibration. In this study, an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral, rolling and yawing motion of the car body and the bogie. The numerical analysis for the equation motions with 17 degrees of freedom showed the running stability and the critical speed due to the snake motion. Also the vibration modes of the high speed freight car was calculated using ADAMS RAIL software, which showed that the critical speed have the yawing modes of the car body and the bogie.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.193-201
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed but also to reduce the vibration of the train. In this study an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral and yawing motion of the car body, the bogie, and the wheelset. Numerical analysis for the nonlinear equation motions with 17 degrees of freedom showed the running stability and critical speed due to the snake motion. Also, the vibration modes of tile high speed freight car was calculated using ADAMS RAIL, which showed that the critical speed have the yawing modes of the car body and the bogie. Finally, this paper shows that the snake motion of the vehicle can be controlled with the modifications of the design parameters.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1536-1541
• /
• 2011

Simple girder bridges are more economical than commonly used PSC box girder bridges in high-speed railway construction, if they secure the riding stability. In this study, the dynamic behavior and riding stability of the newly developed precast V-girder bridge are analyzed. The dynamic moving load analysis is used including two train load case : the KTX train and freight train.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.505-510
• /
• 2011

The railroad freight transport has great merits that can transport mass and specific items(dangerous goods), but it takes a long time because of low accessibility to the logistics facility and the complex process of loading freight in middle station. This paper analyzed volumes and characters of each railroad freight item, and was carried out the effect of applying E&S system to Gyeongbu line containers to find the method of reducing transport time and effective container transportation. As a result of Cost-Effectiveness analysis, the block train(B/T) is reducing transport time more about 1~2 hours. The road congestion cost is saving about 2.2 billion won. And due to skipping work of organizing train, personnel and equipment expenses savings expected about 9 billion won. It is expected that the E&S system enhances the container transport service and has an effect positive influence on making a efficient method of transport. But It is necessary to estimate pre-feasibility of applying E&S system that the standard of estimating cost and benefit is required further examination.

• 유통과학연구
• /
• 제14권1호
• /
• pp.17-28
• /
• 2016

Purpose - Given the increasing interest in the Eurasian Initiative, government-wide studies for the construction of the Silk Road Express are currently being conducted. However, the Korean Government has no experience in operating international freight railroads and has not encountered problems in train service plans, international conventions, and customs clearance, which will arise when TKR is connected to TSR, TCR, and TMGR. Research design, data and methodology - Given these conditions, the cases of direct services in international freight railroads between China and Europe are investigated to identify the possible problems in the connection between TKR and continental railroads. This study also identifies the plans for activating Eurasian railroad logistics. Results - For the service of international freight trains, Korea needs to join international conventions, such as OJSD, as a regular member. Furthermore, any relevant international conference after the conclusion of such an agreement is needed for the agreement on train service schedules, fees, and procedures for passing border stations. Conclusions - Customs clearance and relevant documents must be standardized to address the differences in clearance systems between nations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.772-778
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2%. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45Hz~3.34Hz and damping ratio revealed for 1.26~2.84%. Maximum verticality deflection(4.86mm) was sufficiently satisfied the design criteria(30.1mm), but in the case of verticality acceleration's respond, design criteria BRDM(Bridge Design Manual) & CTRL presentation derive rail limit value 0.35g be more than value 6 time recorded, maximum was measured 0.49g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1306-1314
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2 %. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45 Hz~3.34 Hz and damping ratio revealed for 1.26~2.84 %. Maximum verticality deflection(4.86 mm) was sufficiently satisfied the design criteria(30.1 mm), but in the case of verticality acceleration's respond, design criteria BRDM(bridge design manual) & CTRL presentation derive rail limit value 0.35 g be more than value 6 time recorded, maximum was measured 0.49 g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2010-2016
• /
• 2009

Before introducing high speed train, train signal system was operated passively depending on a driver by signal lamp display. Now it is changing to onboard signaling system because of train speed increased(conventional track is 230km/h, high speed track is 380km/h), high speed. low speed freight train operation mixed, operation for high speed train in conventional track and dense operation. ie. ETCS(European Train Control System) Level 1 is introducing. Also, in case of high speed train, the train control system of France was introduced and has operated from 2004, now we have a difficulty for rising speed more than 300km/h because of commercial operation speed limited as 300km/h. Therefore, it need to establish the train control technique according to trackside surroundings and develope standard system like European ERTMS/ETCS, China CTCS(Chinese Train Control System), Japan D-ATC(Digital Automatic Train Control). In this paper, we derive the systematization method for Korea train technique by network-oriented, information-oriented, intelligence-oriented and combination-oriented corresponding train development direction. Proposed method has a merit to prevent cross by mixed operation with existing system and improvement after validity demonstration and system development and supply train system to meet user requirement in exporting.

• 한국철도학회논문집
• /
• 제18권5호
• /
• pp.471-480
• /
• 2015

국내 소화물 운송 시장의 공로의존도가 꾸준히 증가하는 추세에 따라 도로정체, 온실가스 배출, 유가상승에 대한 물류비용 증가 등 사회적 비용이 높게 발생되고 있다. 이에 대해 정부는 철도 활성화 정책을 모색하고 있지만 낮은 표정속도와 선로용량 제약, 문전수송의 불가능 등 기존 철도물류시스템으로는 철도물류를 활성화시키기 어려운 특성이 있다. 이에 따라 본 연구는 현 철도물류시스템의 제약을 극복하고 활성화시키기 위한 방안으로 국가R&D과제로 개발 연구 중인 여객/화물 복합 열차(Hy-SoBex; Hybrid-Surface Optimal Baggage Express)을 활용한 다양한 연계 수송 서비스 모델들 중 최적의 서비스 모델을 선정하였다.