• Journal of the Korean Data and Information Science Society
• /
• 제27권1호
• /
• pp.67-74
• /
• 2016

우리나라의 기후적 특성으로 토지가 동절기에는 동결작용을 받고 해빙기에는 융해작용을 받는다. 이러한 동결융해작용의 피해를 최소화하기 위하여 도로 포장 분야에서는 도로 포장 두께에 관한 많은 연구들이 진행 중에 있다. 본 연구는 도로포장 현장계측 온도데이터를 이용하여, 도로 포장 두께를 위해 사용되는 변수들의 적절성을 확인하기 위해 엔트로피 지수를 이용한 의사결정나무 분석을 시행한다. 각 층 온도를 이용하여 생성한 최저동결층 (순서형 변수)을 목표변수로 분석하며, 분석에 사용된 독립변수는 동결지수에 따라 $350{\sim}450^{\circ}C{\cdot}$일, $450{\sim}550^{\circ}C{\cdot}$일, $550{\sim}650^{\circ}C{\cdot}$일로 구분된 지역 변수, 절토부, 절성경계부, 2m 이하 성토부 구간으로 이루어진 단면 변수 그리고 동상방지층 설치 유무이다. 또한, 월과 대기온도도 독립변수에 포함시킨다. 그 결과, 월, 동상방지층 유무, 대기온도, 지역 순으로 최저동결층에 영향을 주는 것으로 나타났다.

• 설비공학논문집
• /
• 제27권10호
• /
• pp.497-505
• /
• 2015

The evaporating temperature range required for the low temperature freezing system is from $-50^{\circ}C$ to $-30^{\circ}C$. Since it is difficult to keep the required capacity in a cabinet, it is advantageous to design the system using a cascade refrigeration system. Use of carbon dioxide and ammonia would be advantageous since ammonia is an environment-friendly working fluid and has a high capacity for performance improvement. To investigate the performance characteristics of the R744-R717 cascade refrigeration system, a theoretical model was developed and performance was analyzed according to cascade heat exchanger operating temperature. The optimal cascade R744 condensing temperature was $-5^{\circ}C$, and maximum COP was 1.13 when the temperature difference of the cascade heat exchanger was $5^{\circ}C$. In addition, the total system COP increased by 1.17 when the cascade temperature gap was $3^{\circ}C$ at the middle temperature of $-7.5^{\circ}C$.

• 설비공학논문집
• /
• 제12권4호
• /
• pp.381-387
• /
• 2000

An experimental study on the stratified fluids was carried out to investigate the flow characteristics, heat transfer through the interface of fluids, and the applications of thermal behaviors in the square cavity. The same volume of water and silicon oil was filled in it. The experiments were performed with the variations of initial temperatures and cooling surface temperatures. And the effect of vertical or horizontal cooling surface positions in the square cavity was investigated. When the cooling surface temperatures were $-4^{\circ}C$ , the supercooling phenomena were observed for both cases of cooling surface positions in the full region regardless of the initial temperature of fluid. In the square cavity with horizontal cooling surfaces, the lower the initial temperatures were, the longer the supercooling durations were, and with vertical cooling surface the lower the initial temperatures were, the shorter the supercooling durations were.

• 설비공학논문집
• /
• 제23권5호
• /
• pp.327-333
• /
• 2011

In the present work, a new freeze protection method has been proposed for a natural circulation system of solar water heater. Though electrothermal wire is popularly used for the purpose, there are freezing troubles by wire cut-off and shortage of excessive electric power consumption. In the experimental device, hot water in storage tank was used to heat the outlet pipe from the tank if the pipe surface temperature falls lower than a set point. The cold water pipe to the storage tank was installed to directly contact the hot water pipe surface temperature rose by transferred heat.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.183-188
• /
• 2002

When Concrete work during winter is placed, it has anxiety that concrete freeze at low temperature. As concrete's freezing cause reduction of durability, it is necessary for mixing to pay attention to Air content and W/C ratios. Accordingly, in this study, we set up three series and evaluate a frost-resistance of concrete with admixture, like fly-ash and blast-furnace slag, for early curing method and types of chemical admixture..The study is composed as; I series : Analysis for early curing method and types of chemical admixture in laboratory II series : Analysis for early curing method and types of chemical admixture in batcher plant and measured concrete' temperature. The result of this study, it was more effective the use of super-plasticizers than air entraining agent.

• Journal of Biosystems Engineering
• /
• 제33권5호
• /
• pp.303-308
• /
• 2008

The freezing characteristics of two kinds of phase change materials (PCM) encapsulated in a spherical container were investigated with various cooling air temperatures and velocities. The super cooling and solidification time of PCM were highly affected by cooling air temperature and velocity. The experimental equations are derived to express total solidification time of the PCM in terms of Nusselt number and dimensionless temperature.

• 대한설비공학회지:설비저널
• /
• 제17권1호
• /
• pp.28-43
• /
• 1988

The purpose of this research is to produce bin weather data for Seoul from Standard Weather Data. The intended use of these data is for input to recently developed models for simplified energy calculations and for generating variable-base degree-day information. The data produced under this study include $3^{\circ}C$ bin data covering the full range of dry-bulb temperatures with mean coincident wet-bulb and daytime coincident solar radiation, wet-bulb bins down to freezing temperature, wind speed bins with prevailing directions, and heating and cooling degree hours to nine different temperature bases. All of these data are tabulated in six separate time periods and total daily categories for monthly and annual periods.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.277-284
• /
• 2001

One of the problems in a refrigerator operation is the frost formation on a cold surface of the evaporator. The frost layer is formed by the sublimation of water vapor when the surface temperature is below the freezing point. This frost layer is usually porous and formed on the cold surface of the evaporator. The frost layer on the surface of a evaporator will make side effect such as thermal resistance. However, these important factors have not been used in determining the defrosting period. Therefore, the proper defrosting operation period based on the new defrosting method is very important, and make a comparison between conventional method like electric defrost and new method in compression work, evaporation pressure, evaporation temperature.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.1-11
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The solution of dimensionless governing equations is determined by the three dimensionless parameters of (temperature ratio/conductivity ratio), Stefan number, and diffusi-vity ratio. The solution at the initial stage of freezing is obtained by expanding it in powers of time, and the final equilibrium state is determined from the steady-state governing equations. The equilibrium state is dependent on (temperature ratio/conductivity ratio), but is independent of Stefan number and diffusivity ratio. The effect of fluid flow on the pure conduction problem can be clearly seen from the solution of the initial stage and the final equilibrium state, and the characteristics of the solidification process for all the dimensionless parameters are elucidated.

• 원예과학기술지
• /
• 제31권4호
• /
• pp.437-446
• /
• 2013

본 시험은 가을철 기온이 높게 유지되는 대구지역에서 성숙기 동안 '후지'의 과실품질 변화와 수확시기별 과실품질과 저장성을 3년(2007년, 2009년, 2010년) 조사하였다. 성숙기 동안 과실품질의 변화는 만개 후 120-135일부터 만개 후 183-198일까지 조사하였다. 수확시기별 과실품질과 저장성 비교는 만개 후 180일 이후에 수확한 과실들을 대상으로 하였다. 과실 성숙기 동안 대구지역 '후지'의 문제점은 $20^{\circ}C$의 높은 기온에 따른 착색불량이었다. 수확시기별 과실품질 비교에 있어, 수확시기가 연장될수록 가용성 고형물 함량과 착색은 높아졌다. 수확 시의 과중은 수확시기에 영향을 받지 않았고, 수확 시의 경도와 산 함량은 동결피해가 발생했을 때 심하게 감소되었다. 저온저장 20주 동안의 에틸렌 발생량 및 경도, 산 함량은 수확시기에 따른 차이가 없었다. 2009년 만개 후 216일에 수확한 과실들의 저온저장 중의 가용성 고형물 함량은 수확시의 가용성 고형물 함량과 비교해 비슷하였으나, 2009년 만개 후 201일에 수확한 과실들은 수확시보다 높아졌다. 그러나 동결피해를 받은 후 수확한 과실의 저온저장 후 경도, 가용성 고형물 함량 및 산 함량은 동결피해 발생 전에 수확한 과실보다 낮았다. 결론적으로 가을철 기온이 높은 지역에서 '후지' 과실을 만개 후 180-200일 대비 2-4주 정도 수확시기를 연장시키면 수확시의 가용성 고형물 함량 및 착색이 증가되었으나, 11월 중순 이후로 최저기온이 $-3.0^{\circ}C$ 이하로 떨어지기 시작하기 때문에 11월 중순 이후로 과실을 수확하는 것은 위험하였다.