• 한국세라믹학회지
• /
• 제16권3호
• /
• pp.155-163
• /
• 1979

This study was to explore the characteristics of 6 mole% CaO stabilized $ZrO_2$ prepared by wet chemical methods. The results of the experiments were as follows: 1. The powder calcined at 1000$^{\circ}$-110$0^{\circ}C$ was partly agglomerated. The morphology of agglomerate was spherical of 0.5-1$\mu{m}$ in size for Hot Petroleum Drying Method, chain-like of 1-2$\mu{m}$ for Freeze Drying Method, and irreqular of 2-3$\mu{m}$ for Coprecipitation Method. 2. Optimum calcining conditions for powder prepared by wet chemical methods were found: 110$0^{\circ}C$, 2h in air for Hot Petroleum Drying Method and Freeze Drying Method, and 100$0^{\circ}C$, 2h in air for Coprecipitation Method. 3. When specimen was calcined at 1000$^{\circ}$-110$0^{\circ}C$ in air for 2h and then sintered at 1$600^{\circ}C$ in air for 4h, the specimens prepared by wet chemical methods showed a high sintered density (94% of theoretical density) and a low open porosity (<0.8%); however, the sintered density of the specimen prepared by Oxide Wet Mixing Method was 90%. 4. The amount of cubic phase of sintered body prepared by wet chemical methods was observed to be higher than the one prepared by Oxide Wet Mixing Method. 5. It was found that Hot petroleum Drying Method, Freeze Drying Method and Coprecipitation Method were nearly the same in respect of the results of stabilization grade and sintered density of CaO-stabilized $ZrO_2$.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.1057-1063
• /
• 1996

Y2O3-CeO2-ZrO2 powders were prepared from water-soluble salts using a coprecipitation method. The forming process of oxide and the characteristics of the calcined powders treated in different drying conditions were investigated. The oxidation was occurred at the temperature of around 40$0^{\circ}C$ and the main crystallization of ZrO2 around $600^{\circ}C$. On calcination at $600^{\circ}C$ heating lamp-dried powders consisted of agglomerates of globular morphology with average agglomerate size of 2.27${\mu}{\textrm}{m}$ and specific surface area of 68.3m2/g and spray dried powders contained dense spheric particles with average agglomerate size of 1.35${\mu}{\textrm}{m}$ and specific surface area of 11.0m2/g which exhibited low agglomeration tendency. Removal of the water by a freeze-drying technique produced calcined powders containing flake-like secondary particle structures with wide agglomerate size distri-bution of 0.1-60${\mu}{\textrm}{m}$ and specific surface area of 24.5${\mu}{\textrm}{m}$. The 20 MPa-pressed density (36.8-41.4% T,D) of calcined powders did not nealy depend on drying methods whilst compaction ratio of calcined powders derived from freeze-drying was the highest ( 6.24) among three drying methods. On continuous heating up to 150$0^{\circ}C$ the sinterability of calcined powders derived from heating lamp-drying was superior to those derived from spray-and freeze-drying. The final sintered density of calcined powders was the highest (96% T,D at 150$0^{\circ}C$) in case of heating lamp-drying.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.295-297
• /
• 2000

A new method to evaluate erosion of biodegradable polymer, polyanhydrides, was developed. The polymer devices were prepared with the melt-casting method and weight loss was accurately measured after agitating the devices in buffers (pH 1-9), and removing the device at selected time intervals and freeze-drying the device. The erosion rate was estimated from the plot of the weight loss(%) of device as a function of time. The freeze-drying technique used in this study is particularly useful for estimating the erosion rate of biodegradable polymer.

• 한국식품영양과학회지
• /
• 제40권12호
• /
• pp.1680-1687
• /
• 2011

마늘을 무처리(control), 자숙(boiling), 굽기(baking), 증자(steaming)의 처리방법과 열풍건조 및 동결건조의 방법으로 분말마늘을 제조하여 품질특성과 생리활성을 비교조사 하였다. 열처리 후 열풍건조한 분말마늘은 동결건조분말마늘보다 수분함량이 높았고, 수분활성도 역시 같은 경향을 보였다. 색차계로 분말마늘의 색도를 조사한 결과, 열풍건조구가 동결건조구에 비하여 모든 처리구에서 밝기를 나타내는 L 값은 낮았고, 적색도를 나타내는 a 값과 황색도를 나타내는 b 값은 높았으며 특히 굽기 처리를 한 경우 갈변현상이 강하게 나타났다. 분말마늘의 항산화능을 평가한 결과, 전자공여능과 총 폴리페놀 함량은 가열처리를 하지 않고 건조시킨 경우 유의적으로 높았고, 자숙, 굽기, 증자 등의 열처리를 한 경우는 열풍건조방법이 동결건조보다 항산화 활성이 높게 나타났으나, 아질산염소거능은 전처리방법에 따른 영향을 받지 않았다. 혈전용해능은 가열처리과정 없이 열풍건조 방법으로 제조된 분말마늘이 가장 우수하였고, 가열처리를 한 경우는 열풍건조로 제조된 분말마늘의 혈전용해능이 동결건조분말마늘보다 2배 정도 더 높은 활성을 나타내었다. 전처리방법 중에서는 굽는 방법은 자숙처리법에 비해 비교적 높은 항산화능과 혈전용해능을 갖는 것으로 나타났다. 식중독균에 대한 항균활성 검사 결과, 모든 열처리구에서 항균활성을 나타내지 않았으나, 무처리구의 경우 동결건조가 열풍건조보다 높은 항균성을 나타냈으며, 균주별로는 Bacillus cereus, Salmonella Typhimurium, Staphylococcus aureus에 대해 유의적으로 높은 항균활성을 나타내었다.

• 한국약용작물학회지
• /
• 제22권6호
• /
• pp.497-503
• /
• 2014

In order to produce the high quality of dried-ear mushroom, various drying methods such as hot-air drying at $40{\sim}80^{\circ}C$, freeze drying and drying in vinyl house were carried out. Drying hours of hot-air drying, freeze drying and drying in vinyl house were 12.5~21.5, 36.0 and 72.0 hrs, respectively. Vitamin $D_2$ content of sample was the highest as $6.77{\mu}g/g$ DW in drying in vinyl house and then followed by freeze drying as $5.90{\mu}g/g$ DW and hot-air drying as $1.89{\sim}5.01{\mu}g/g$ DW. After dry, external appearance and color of mushrooms applied hot-air drying and drying in vinyl house were better than freeze-dried one. After rehydration, water uptake of sample in drying in vinyl house and hot-air drying at $50{\sim}60^{\circ}C$ were 17.8 and 19.3~21.0 times, respectively. The methods of drying in vinyl house and hot-air drying at $50{\sim}60^{\circ}C$ also led to high hardness, good shape and resilience. As the results of production of dried-ear mushroom with high quality, we suggest that the best method for drying is the drying in vinyl house due to not only high vitamin $D_2$ content, good external appearance and color after drying but also high hardness and good shape after rehydration.

• 한국식품과학회지
• /
• 제30권4호
• /
• pp.877-882
• /
• 1998

본 연구에서는 생마의 적정 건조방법을 알아 보고자 동결건조, 냉풍건조 및 열풍건조 방법으로 마를 건조시 각 건조 방법의 최적 조건을 조사하고, 3가지 건조 방법에 따른 마의 식품학적 품질 특성을 비교 평가하여 최적 건조방법을 고찰해 보고자 하였다. 동결건조시 $40^{\circ}C$ 이하로 가열하면서 건조 시키면 건조후 마고유의 색, 향, 맛과 점질성이 생마와 거의 같은 수준으로 유지되었다. 열풍건조나 냉풍건조의 경우 건조후 마의 색이 연한 백색이나 미색을 나타내지 않고 갈변되었다. 향이나 맛의 경우 냉풍건조시는 마 고유의 향이나 맛이 감소되었으며 열풍건조에서는 마 고유의 향이나 맛이 감소되었을 뿐 만 아니라 가열취나 구수한 맛도 나타났다. $40^{\circ}C$ 동결건조 마는 생마와 유사한 0.0160 Pa.s의 겉보기 점도를 나타내었으나 열풍건조와 냉풍건조는 생마의 반 이하 수준으로 점도가 감소하여 점질성을 거의 나타내지 않았다. 결론적으로 생마의 식품학적 주요 특성인 점질성, 색, 마 고유의 향과 맛을 유지하며 분산성과 용해성을 높이는 건조 방법으로는 동결건조가 가장 좋은 것으로 평가되었으며, 분말화시 분말의 용도에 적합한 용해성 및 분산성 같은 물성이 높게 나타나는 적정 입자 크기는 $40{\sim}60{\;}mesh$ 사이인 것으로 나타났다.

• 한국식품영양학회지
• /
• 제37권3호
• /
• pp.129-138
• /
• 2024

In this study, in order to develop an foaming tablet product using yuzu powder, yuzu powder was manufactured using different drying methods such as freeze-drying, 60℃ drying, and 40℃ drying, and then quality characteristics and functionality were analyzed. The naringin content per g of yuzu powder was 8.9 mg for freeze-drying and 8.8 mg for 60℃ drying, and the hesperidin content per g of yuzu powder was highest at 53.6 mg for freeze-drying and 46.2 mg for 60℃ drying. followed by 40℃drying (41.7 mg). The tyrosinase inhibitory activity of 60℃ dried powder was found to be twice as high as that of freeze dried powder. Accordingly, in order to develop an inner beauty product, foaming tablets were manufactured using hot air dried powder, and the quality characteristics and functional ingredients of the final foaming tablets were investigated. The foaming tablet prepared with yuzu powder content of 10 and 15% showed an inhibitory activity of tyrosinase of 73.7 %, which was 1.6 times higher than that of ascorbic acid (1 mM), which was a positive control, confirming its melanin production inhibition effect.

• Food Science and Biotechnology
• /
• 제16권2호
• /
• pp.187-192
• /
• 2007

The objectives of this study were to examine changes in the color and antioxidant compounds of paprika powder under various conditions, as well as to establish the suitable conditions for drying and storage. Paprika was dried using the following methods: freeze-drying, vacuum drying, far infrared-ray drying, and hot-air drying. Measurements of the moisture content, color pigments, and antioxidant compounds (total carotenoids, capsanthin, ascorbic acid, and total polyphenols) were completed during 120 days of storage at 4 and $30^{\circ}C$. We found that drying methods, storage temperatures, and packaging materials affected the American Spice Trade Association (ASTA) and Hunter color values, as well as the antioxidant content of paprika powder. There was a high correlation (r=0.87, p<0.01) between the ASTA color and the $a^*/b^*$ value. The loss of red color was closely related to the reduction of moisture content (r=0.81, p<0.01) during storage. Drying paprika with a low temperature in the absence of air resulted in better retention of the carotenoids and ascorbic acid. Also, as the retention of the carotenoids and ascorbic acid increased, the stability of the red pigment increased. Freeze-drying was found to be the most suitable drying method for the stability of the antioxidant compounds and red pigment.

• 대한수의학회지
• /
• 제47권2호
• /
• pp.219-228
• /
• 2007

Bone allograft had been increased the need because autogenous bone graft is associated with donor site morbidity and is restricted in quantity. The bone allograft implants have to prepare properly for increasing osteoinductive ability and decreasing immune responses before providing to graft. The purpose of this study was to investigate the efficacy on new bone formation in bone allografts by treatment of implants. Cortical bone allografts were transplanted to experimental defects on midshaft of diaphyseal fibulae in 15 rabbits, which were divided to 3 experimental groups according to the preparation methods-freezing, freeze-drying, defat-freezing. The grafted regions of fibulae of all groups had been radiographed biweekly for 16 weeks to observe new bone formation and union between implant and recipient bone. Bone Alkaline Phosphatase (BALP) in all groups was evaluated biweekly till the end of the experiment to determine osteoblast activities. Unions between implant and recipient bone were observed at 30% (3 of 10 cases) of freezing, 50% (5 of 10 cases) of freeze-drying and 80% (8 of 10 cases) of defat-freezing. BALP was increased over 100% from before graft at 2 weeks of graft procedures in all union cases of freezing and defat-freezing group, then gradually decreased till 16th week. In non-union cases, there is no significant variation in BALP value. Defat-freezing method for allograft implants might be more effective for osteoinductive efficacy of implants than freezing and freeze-drying method.

• Journal of Pharmaceutical Investigation
• /
• 제30권2호
• /
• pp.93-98
• /
• 2000

In order to evaluate the effect of fabrication methods on the controlled release of an antibiotic from a polymeric device, two types of polyurethane-cefadroxil matrix were prepared by the solvent casting method or the freeze drying method, using bovine serum albumin as a pore former. The amount of cefadroxil released from various formulations at $37^{\circ}C$ was measured by HPLC. The duration of antimicrobial activity of matrices against S. aureus was evaluated by measuring the diameters of the inhibition zone. The morphology of the matrices was investigated by scanning electron microscopy (SEM). Changing the fabrication method could alter the release rate of cefadroxil from the matrix. The matrix fabricated by the freeze drying method had more porous inner structure and showed higher release rate than that prepared by the solvent casting method. However, the duration of antimicrobial activity was shorter when the matrix was fabricated by the freeze drying method.