• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.981-992
• /
• 2004

Freeze drying under vacuum condition is a complex process that involves simultaneous heat and mass transfer, sublimation of ice, and motion of sublimation front. Proper treatment of the motion of sublimation interface is crucial for an accurate prediction of the freeze drying process. Based on the enthalpy formulation that has been successfully used in liquid/solid phase change problems. a fixed grid method. streamlined for the freeze drying analysis. was developed in this study. The accuracy of the fixed grid method was checked by solving a one-dimensional tray freeze drying and a two-dimensional vial freeze drying problem and then comparing the results with those by the moving grid method. Finally. the freeze drying characteristics of two-dimensional slab and axis-symmetric cylinder was investigated using the fixed grid method.

• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.155-160
• /
• 2009

This study was attempted to quality characteristics of ginseng powder using molecular press dehydration(MD) method. Ginseng powder was dried using maltodextrin as dehydrating agents, and the quality of the ginseng powder was compared with that of freeze-drying and hot air-drying samples in terms of colors, moisture contents and grain size. The colors of ginseng powder using MD-drying and freeze-drying was better than hot air-dried ginseng powder. The moisture contents of ginseng powder using MD-drying was 9.49%, while freeze-drying was 4.14% and hot air-drying 11.71% after 72ball mill times. The grain size of ginseng powder using MD-drying and freeze-drying was better than hot air-drying ginseng powder. These results suggest that drying of ginseng powder using molecular press dehydration method is very efficient, because minimal cell destruction may be achieved.

• Applied Microscopy
• /
• 제28권3호
• /
• pp.299-306
• /
• 1998

T-butyl alcohol (TBA) freeze-drying method originally designed by Inoue and Osadake (1989) was adopted to dry specimens for scanning electron microscopy and the results were compared with those dried using critical point dryer (CPD). Small pieces $(1\times1\times3mm)$ of liver of Sprague-Dawley rats were cut and fixed in 2% glutaraldehyde in 0.1 M sodium cacodylate buffer after anesthesia, and processed for scanning electron microscopy by several modifications of TBA freeze-drying methods and by the standard preparation method using CPD. The bile canaliculi and sinusoidal endothelial surface were observed. Tissue dehydrated with TBA before TBA freeze-drying preserved the structures best comparable to those prepared with CPD. This result suggests that combination of dehydration with TBA and TBA freeze-drying is a superior method to the original TBA freeze-drying method dehydrated with ethanol.

• 설비공학논문집
• /
• 제16권10호
• /
• pp.923-931
• /
• 2004

A multi-dimensional freeze drying analysis program, which took simultaneous heat and mass transfer, sublimation of ice and motion of sublimation front into full account, was developed using finite volume method with fixed grid. The effect due to the motion of sublimation interface was modeled by an enthalpy formulation streamlined for the freeze drying problems. The efficiency and accuracy of the program was validated by solving one- and two-dimensional freeze drying problems frequently encountered in industrial processes. Finally, the freeze drying processes of cylinder and slab objects with permeable side surfaces were simulated, which demonstrated the capability of the present analysis program in solving multi-dimensional freeze drying problems with complex sublimation interface configurations.

• 한국식품영양학회지
• /
• 제13권2호
• /
• pp.152-157
• /
• 2000

In order to select the optimum drying method for the production of cinnamon extract, water extract and 70% ethanol extract of cinnamon were prepared. And then several drying method of oven drying, vacuum evaporation, spray drying and freeze drying were performed. Content of cinnamic acid, cinnamic aldehyde, eugenol, tannin and free sugar, and antioxidant activity, degree of browning, pH, color value, turbity and solubility were compared. In water extract, contents of cinnamic acid, cinnamic aldehyde, eugenol were 29.45mg/100g, 94.86mg/100g, 120.75mg/100g and decreased to 4.76%∼44.21%, 5.30%∼48.05%, 3.66%∼21.83% by oven dyring, vaccum drying, spray drying respectively, but freeze drying showed a little decrease of those components. In 70% ethanol extract, effectual components decreased to 76.05%∼88.38% and 26.86%∼78.76% by freeze drying and vacuum evaporation respectively. Antioxidant activity decreased by drying and decreasing rate in 70% ethanol extract was lower than water extract. Degree of browning increased as the drying temperature increased. Tannin and free sugars were little affected by drying temperature. Solubility decreased in oven drying and 70% ethanol extract. Overall data suggested that optimum drying methods of cinnamon extract were freeze drying in case of water extract and freeze drying and vaccum drying in case of 70% ethanol extract.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1341-1352
• /
• 2001

Vacuum freeze drying process by which frozen water in a drying material is removed sublimation under vacuum condition, is now applied to various industrial field such as the manufacturing and packaging of pharmaceuticals in pharmaceutical industry, the drying of bio- products in bio-technology industry, the treatment of various quality food stuff in food technology, and so on. The Knowledge about the heat and mass transfer characteristics related with the vacuum freeze drying process is crucial to improve the efficiency of the process as well as the quality of dried products. In spite of increasing needs for understanding of the process, the research efforts in this fields are still insufficient. In this paper, a numerical code that can predict primary drying in a vial is developed based on the finite volume method with a moving grid system. The calculation program can handle the axis- symmetric and multi-dimensional characteristics of heat and mass transfer of the vial freeze drying process. To demonstrated the usefulness of the present analysis, a practical freeze drying of skim Milk solution in a vial is simulated and various calculation results are presented.

• 한국식생활문화학회지
• /
• 제38권5호
• /
• pp.356-364
• /
• 2023

This study compared the physicochemical properties of soybean curd residue and black soybean curd residue produced by hot air-drying and freeze-drying. Regardless of drying method, the crude protein, crude ash, crude fiber contents, pH, L, a, b color values and water soluble index were higher in soybean curd residue, whereas total polyphenol contents and antioxidant activity were higher in black soybean curd residue. Significant differences in water absorption index, oil absorption capacity and emulsion activity were observed between soybean curd residue and black soybean curd residue in freeze-drying. On the other hand, the emulsion stability was not significant difference in both hot-air drying and freeze-drying. The crude protein and crude fiber contents of soybean curd residue were not significant difference between hot-air drying and freeze-drying. Freeze-drying resulted in higher crude ash contents, pH, water absorption index, water soluble index, oil absorption capacity, emulsion activity and emulsion stability than hot-air drying. Hot-air drying have caused significantly higher water contents, water activity, total polyphenol contents and antioxidant activity in soybean curd residue than freeze-drying. In conclusion, soybean type and drying methods affect the physicochemical and quality characteristics of soybean curd residue, which could be important factors in the manufacture of processed foods.

• Preventive Nutrition and Food Science
• /
• 제12권1호
• /
• pp.40-45
• /
• 2007

The effects of drying methods on the physicochemical properties of chaga (Inonotus obliquus) mushroom powder were investigated. Scanning electron micrograph revealed that freeze drying produced smaller particle- sized samples which in turn resulted in higher porosity than did vacuum and hot-air drying. Samples prepared by freeze drying showed a significantly higher L*-value as compared with those prepared by hot-air drying and vacuum drying (p<0.05). The lightness (L*-value) significantly decreased with increasing relative humidity and storage temperature regardless of drying method (p<0.05). The yellowness (b*-value) increased significantly with increasing relative humidity (p<0.05). Browning index was significantly lower in samples prepared by freeze drying (p<0.05) but not significantly different between samples dried by hot-air and vacuum drying. Freeze dried sample exhibited a significantly higher degree of rehydration than other samples (p<0.05) probably due to the small particle size. Water solubility of the freeze dried sample was higher than those of the other methods while swelling ratio of the same sample appeared to be lower than those of others. Freeze dried chaga mushroom powder contained significantly lower amount of total phenolics and total sugar as compared to other samples (p<0.05).

• 한국재료학회지
• /
• 제23권10호
• /
• pp.592-598
• /
• 2013

Graphene oxide powders prepared by two different drying processes, freeze drying and spray drying, were studied to compare the effect of the drying method on the physical properties of graphene oxide powder. The graphene oxide dispersion was prepared from graphite by chemical delamination with the aid of sulfuric acid and permanganic acid, and the dispersion was further washed and re-dispersed in a mixed solvent of water and isopropyl alcohol. A freeze drying method can feasibly minimize damage to the sample, but it requires a long process time. In contrast, spray drying is able to remove a solvent in a relatively short time, though this process requires exposure to a high temperature for a rapid evaporation of the solvent. The powders prepared by freeze drying and spray drying were characterized and compared by Raman spectroscopy, X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and by an elemental analysis. The graphene oxide powders showed similar chemical compositions; however, the morphologies of the powders differed in that the graphene oxide prepared by spray drying had a winkled morphology and a higher apparent density compared to the powder prepared by freeze drying. The graphene oxide powders were reduced at $900^{\circ}C$ in an atmosphere of $N_2$. The effect of the drying process on the properties of the reduced graphene oxide was examined by SEM, TEM and Raman spectroscopy.

• 대한영양사협회학술지
• /
• 제19권4호
• /
• pp.389-399
• /
• 2013

This study compared the nutritional composition and antioxidative activity of different parts of Taraxacum coreanum (aerial parts and roots) according to different drying methods (natural drying and freeze-drying). There were no significant differences in vitamin C content in roots depending on the drying methods. However, vitamin A (P<0.01), E (P<0.001) and C (P<0.001) content of aerial parts, and vitamin A (P<0.001) and E (P<0.05) content of roots were significantly higher after freeze-drying compared to natural drying. For organic acids, the oxalic acid content of the aerial parts and roots were the highest. The total polyphenol and total flavonoid content in extracts from the aerial parts (P<0.01) and roots (P<0.05) were significantly higher after freeze-drying compared to natural drying. In addition, the total polyphenol and flavonoid content, DPPH radical scavenging activity, and antioxidative index from the natural drying and freeze-drying of Taraxacum coreanum extracts were significantly higher in the aerial parts compared to the roots (P<0.05). These results suggest that the nutritional composition and antioxidative activity of Taraxacum coreanum are higher in the aerial parts compared to the roots, and higher after freeze-drying compared to natural drying. Therefore, the aerial parts of Taraxacum coreanum could be suggested as an antioxidative functional food source.