• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.2
• /
• pp.288-301
• /
• 2002

A vacuum freeze drying experiment of skim milk solution in a cylindrical container is conducted to investigate the multi-dimensional drying characteristics of the process during the primary drying stage. Temperature histories at several positions are measured under the same process condition that is carefully controlled. Then the measured temperature histories at different positions are combined to produce instantaneous temperature distribution fields inside the cylindrical container. Along with the temperature measurement, the mass reduction history of the skim milk solution is also measured. From the measured temperature distribution curved configurations of sublimation interfaces and 2-dimensional heat transfer is inferred. The freeze drying under the present experimental setup is simulated with a calculation program that is based on a finite volume method with a moving grid system. Good agreements between the numerical and experimental results are observed. The present experimental results and the numerical approaches can be useful information in developing the analysis tools for practical vacuum freeze drying processes.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.87-91
• /
• 1999

In an attempt to test experimental condition of preparing grape powder, grapes having less commercial value was used and tried. With drying method, spray and freeze drying were satisfactory to produce power. Moisture content and odor retention were better by the latter method. Three grape strains stored for 40 days contained more odors than those stored for 5 days. Maltose 90% plus dextrin 10% was suitable for drying support. To increase odror sense, citric acid and vitamin C can be added up to 0.1 and 0.2%, respectively. Considering these conditions, grape complex powder prapared from grape powder 20% comprising drying support, glucose 79.7%, citric acid 0.1%, vitamin C 0.2% with freeze drying was the best by overall evaluation including sensory test. When campbell and neomuscut were mixed by 15:5 or 10:10, sensory evaluation was also ameliorated.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.743-748
• /
• 2013

The purposes of this study are to prepare Hanji fiber-filter sheets using replacement liquid in water-swollen fiber with non-polar solvent such as ethanol, methanol and pentane. The experiments were studied on the selection of optimal non-polar solvent and the optimal drying method for wetted fiber and then were to know physicochemical characteristics of prepared Hanji fiber-filter sheet. The Ethanol as liquid changer in water-swollen fiber was excellent solvent and the optimal drying method for them was freeze drying served with vacuum pump. The bulk density and porosity of prepared fiber sheet from freeze dryer were 0.11-0.13 g/mL, half of natural dried fiber sheet, and 90%, respectively. The results of SEM observation for the fiber sheet prepared with natural drying or heating drying were shown very close structure of fiber wall in dry state. However, the freeze drying sheet were shown the open structure. So, the head loss of freeze drying sheet was very lower than natural drying and heating drying sheets. From the results of BTEX removal experiments, the sheets dried at water wetted condition was shown more higher efficiency than the fiber sheets dried at solvent wetted condition.

• Korean Journal of Food Science and Technology
• /
• v.48 no.1
• /
• pp.15-19
• /
• 2016

Drying process was applied to increase the antioxidant activity of onion powder: freeze-drying or air-drying at 50, 70, and $90^{\circ}C$ and onion extracts were obtained from each powder using water or aqueous ethanol (50%) at $25^{\circ}C$ and $60^{\circ}C$. In the color analysis, the freeze-dried powders showed higher $L^*$ and lower $a^*$ and $b^*$ values than did the air-dried ones. The browning index of powders air-dried at $90^{\circ}C$ was significantly higher than that of freeze-dried powders or those air-dried at temperatures below $90^{\circ}C$. Phenolic content in the extracts was 4.02-23.12 mg gallic acid equivalent/g sample, and was the highest in the extract from the sample air-dried at $90^{\circ}C$, regardless of the extraction condition. The highest antioxidant activity, measured by 2,2-azinobis-3-ethylbenzothiazoline-6-sulfonic acid and 1,1-diphenyl-2-picrylhydrazyl methods, was found in the powder air-dried at $90^{\circ}C$, which induced browning. These findings indicate that antioxidant activity depends more on browning during drying than on extraction conditions.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.259-263
• /
• 2012

Dependence of the freeze-drying process condition on microstructure of porous W and pore formation mechanism were studied. Camphene slurries with $WO_3$ contents of 10 vol% were prepared by milling at $50^{\circ}C$ with a small amount of dispersant. Freezing of a slurry was done in Teflon cylinder attached to a copper bottom plate cooled at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $800^{\circ}C$ for 30 min, and sintered in the furnace at $900^{\circ}C$ for 1 h. After heat treatment in hydrogen atmosphere, $WO_3$ powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about $70{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores with dendritic structure due to the growth of camphene dendrite depending on the degree of nucleation and powder rearrangement in the slurry.

• Journal of Biosystems Engineering
• /
• v.13 no.4
• /
• pp.38-45
• /
• 1988

The freeze drying of garlic juice was carried out in a vacuum freeze dryer, laboratory size, by backface heating. The factors which influence the rate of freeze drying, the pressure of drying chamber, the plate temperature, the concentration and the thickness of a sample, were discussed in this study. The drying rate was in proportion to the drying chamber pressure and when the pressure was at 1.5 torr, the foaming occured on the surface of materials, so this condition was not suitable for freeze drying. As the temperature of plate increased, drying rate increased, but when the temperature was $20^{\circ}C$, it was impossible to accomplish freeze drying because the foaming and the dispersion occured in a sample. The higher the concentration of a sample was, the lower drying rate was.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.799-804
• /
• 2002

Optimum conditions of freeze-dried carrots were determined using response surface methodology. Physicochemical and sensory properties of freeze-dried carrot prepared at different plate temperatures and chamber pressures were evaluated. Drying time increased with decreasing plate temperature and chamber pressure. Rehydration ratio decreased inversely with chamber pressure at low plate temperature, but increased proportionally with chamber pressure at high temperature. Density, color, and sensory off-flavor were not affected by the plate temperature and chamber pressure. Sensory color, tenderness, and carrot flavor increased with decreasing plate temperature, but were not affected by chamber pressure. Based on the drying time, rehydration ratio, and sensory attributes, optimum plate temperature and chamber pressure for the preparation of freeze-dried carrot were determined as $43^{\circ}C$ and 700 micronHg, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.221-228
• /
• 2001

This study was carried out to investigate the effect of germination condition and drying temperature on growth and physicochemical properties of brown rice. Three brown rice seeds of Ilpumbyeo, Dasanbyeo and Heugjinjubyeo were stored at room temperature for six weeks to test the time-sequence germination viability. Relatively stable germination ratio was maintained until 2 weeks after storage. However, 3 weeks after storage, germination ratio of brown rice seeds started to decrease rapidly and their germination ratio was lower than 80%. For this reason, brown rice was recommended for seeding within 2 weeks after hulling. During the initial 5 days, germination ratio of 24 hours pre-soaking brown rice was higher about 2-3% than that of non-soaking brown rice. The $25^{\circ}C$ was considered as the most favorable temperature for brown rice germination, because of the high germination ratio and desirable coleoptile growth of the brown rice, and little seed rotting symptoms. The scanning electron micrographs showed the structural differences between hot-air dried and freeze dried germinated-brown rice kernel. In the freeze dried germinated-brown rice, seed coat (pericarp, tegmen and aleurone layer) was mechanically disrupted from the endosperm, and many cleavages were observed among starch storing cells and starch granules. The endosperm of freeze-dried brown rice kernels formed the sponge-like structures and showed the fragile traits. For this reason, hot-air drying is considered as more suitable method than freeze drying for germinated-brown rice. The crude protein and amylose contents were slightly changed, but there were no significant differences during the germination period. Crude fiber content was decreased, but crude Int and total amino acid contents were increased as seeding days increased. A rapid increase in $\alpha$-amylase activities of germinating brown rice was observed at S days after seeding, and $\alpha$-amylase activities were decreased from 8 days after seeding. Total free sugar contents were decreased during the germination period. There was continuous decline in the contents of sucrose and glucose until 8 days after seeding, but fructose and maltose content were gradually increased from the 5 days after seeding.

• Proceedings of the Culinary Society of Korean Academy Conference
• /
• 2005.10a
• /
• pp.61-86
• /
• 2005

Kimchi power made by kimchi fermentation and freeze-drying was added to Western foods of sauce, soup, pizza, cracker and bread. Flavor qualities of the processed fusionfoods were evaluated by analyzing volatile compounds and sensory evaluation. The optimum condition of kimchi fermented for the best flavor quality of freeze-drying was the ranges of pH4.0${\sim}$pH4.7 and acidity 0.5${\sim}$0.8. The number of volatile compounds identified from extracts of the freeze-dried kimchi powder was 24, which contained 7 alcohols, 5 esters, 5 acids, 3 sulfur-containing compounds, 2 aldehydes, 1 oxygen-containing and 1 other. Among the identified compounds, the most abundant compound was eugenol(39.40%), followed as the order of dodecanoic acid(4.91%), acetic acid(1.70%), methyl 2-propenyl disulfide(1.52%), hexanal(1.51%) and 2-pentylfuran(1.18%). These compounds affected the flavor quality of kimchi powder.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.95-99
• /
• 2012

The compressive strength of PEG along processing concentration and solvent is willing to be measured and proper processing condition for exhibition and storage is also willing to be measured by comparing with dimensional stability. In the advanced research of setting PEG-preprocessing concentration & solvent for freeze drying of waterlogged archaeological wood of high water content, vacuum freeze drying showed the highest dimension stability after 40% PEG-preprocessing of aqueous solution. In this study, the compressive strength increased in proportion of processing concentration and water showed the relatively-higher compressive strength than t-butanol regarding solvent. Especially, it showed that there is no big strength difference between PEG 40% and PEG 50% in aqueous solution by 6.6%(16kgf/$cm^2$). According to the above results, it was recognized that it is most effective to implement freeze drying after 40% PEG-preprocessing when want to dimensional stability and compressive strength simultaneously.