• Korean Journal of Microbiology
• /
• v.50 no.1
• /
• pp.73-83
• /
• 2014

The objective of the this study was to investigate the binding capacity and removal ability of lactic acid bacterial strains obtained from Korean soybean paste for mutagenic heterocyclic amines (HCAs) formed during cooking of protein-rich food at high temperature. Among 19 strains identified by carbohydrate fermentation and 16S rRNA sequencing, the live cell or cell-free culture supernatant of Lactobacillus acidophilus D11, Enterococcus faecium D12, Pediococcus acidilactici D19, L. acidophilus D38, Lactobacillus sakei D44, Enterococcus faecalis D66, and Lactobacillus plantarum D70 inhibited the mutagenesis caused by either 3-amino-1,4-dimethyl-5H-pyrido[4,3-b] indole (Trp-P-1) or 3-amino-1-methyl-5H-pyrido[4,3-b] indole (Trp-P-2) in Salmonella typhimurium TA98 and TA100. The bacterial cells of the isolated strains showed greater binding activity than the pure cell wall, exopolysaccharide, and pepetidoglycan. The carbohydrate moieties of the cell wall or protein molecules on the cell surface have a significant role in binding Trp-P-1 and Trp-P-2, since protease, heating, sodium metaperiodate, or acidic pH treatments significantly (P<0.05) reduced the binding efficacy of the tested bacteria. Addition of metal ions or sodium dodecyl sulfate decreased the binding ability of E. faecium D12, L. acidophilus D38, and E. faecalis D66. Therefore, the binding mechanisms of these strains may consist of ion-exchange and hydrophobic bonds. Especially, the high mutagen binding by L. acidophilus D38 and L. plantarum D70 may reduce the accumulation or absorption of Trp-P-1 and Trp-P-2 in the small intestine via increased excretion of a mutagen-bacteria complex.

• Composites Research
• /
• v.33 no.3
• /
• pp.125-132
• /
• 2020

The polymerization shrinkage behavior of dimethacrylate-based composite (Clearfil AP-X, Kuraray) and silorane-based composite (Filtek P90, 3M ESPE) used for dental composite restorations was measured using digital image correlation method. The stress distribution on the surface of specimen was calculated by finite element analysis with equivalent elastic modulus and was compared with the measured shrinkage distribution. Camera images were monitored by a CCD camera during and after the irradiation of light. As a result of the DIC analysis, a non-uniform shrinkage distribution was observed in both composite resins, and the resin core inside the ring specimen had free flowability, leading to in greater shrinkage strain than the resin/ring interfacial region. It was observed that as the distance from the center of the resin increased, the radial average shrinkage strain decreased. The radial average shrinkage strain during light irradiation occurred to be 33% for P90 and 57% for AP-X of the entire strain at the end of the test. The shrinkage behavior of P90 and AP-X was measured to be significantly different from each other during light irradiation. In the resin near the resin/ring interface, it was confirmed that the tensile strain rapidly formed to increase after light irradiation, causing a tensile stressed, interface weak.

• Korean Journal of Ecology and Environment
• /
• v.36 no.2 s.103
• /
• pp.108-116
• /
• 2003

To investigate bacteria with algal Iytic activities against Anabaena cylindrica when water blooming occurs and to study enzyme profiles of alga-Iytic bacteria, various bacterial strains were isolated from surface waters and sediments in eutrophic lakes or reservoirs in Korea. Abacterial strain AK-07 was characterized and identified as Acinetobacter johnsonii based on its16S rDNA base sequence. When AK-07 was co-cultivated with A. cylindrica, bacterial cells propagated to $8\;{\times}\;10^8$ cfu $ml^{-1}$ and Iyses algal cells. However, culture filtrates of AK-07 did not exhibit algal Iytic activities. That suggesting the enzymes on the surfaces of the bacterium might be effective algal Iytic agents to cause Iyses of cells. Acinetobacter johnsonii AK-07 exhibited high degradation activities against A. cylindrica, and formed alginase, caseinase, lipase, fucodian hydrolase, and laminarinase. Moreover, glycosidases for example ${\beta}$-galatosidase, ${\beta}$-glucosidase, ${\beta}$-glucosaminidase, and ${\beta}$-xylosidase, which hydrolyzed ${\beta}$-0-glycosidic bonds, were found in cell-free extracts of A. johnsonii AK-07. Other glycosidase such as ${\alpha}$-galctosidases, ${\alpha}$-N-Ac-galctosidases, ${\alpha}$-mannosidases, and ${\alpha}$- L-fuco-sidases, which cleavage ${\alpha}$-0-glycosidic bondsare not detected. In the results, enzyme systemsof A. johnsonii AK-07 were very complex to do-grade cell walls of cyanobacteria. The polysaccharides or peptidoglycans of A. cylindrica maybe hydrolyzed and metabolized to a range of easily utilizable monosaccharides or other low molecular weight organic substances by strain AK-07 of A. johnsonii.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.5
• /
• pp.395-409
• /
• 2022

To overcome the limitation of conventional rock excavation methods, the excavation with abrasive waterjet has been actively developed. The abrasive waterjet excavation method has the effect of reducing blasting vibration and enhancing the excavation efficiency by forming a continuous free surface on the rock. However, the waterjet cutting performance varies with rock fracturing characteristics. Thus, it is necessary to analyze the cutting performance for various rocks in order to effectively utilize the waterjet excavation. In this study, cutting experiments with the high pressure waterjet system were performed for basalt and granite specimens. Water pressure, standoff distance, and traverse speed were determined as effective parameters for the abrasive waterjet cutting. The cutting depth and width of basalt specimens were analyzed to compare with granite results. The averaged cutting depth of basalt was shown in 41% deeper than granite; in addition, the averaged cutting width of basalt was formed by 18.5% narrower than granite. The results of this study are expected to be useful basic data for applying rock excavation site with low strength and high porosity such as basalt.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.3
• /
• pp.103-107
• /
• 2024

In this study, nickel, a pure metal material, was proposed as a saggar for synthesizing NCM [Li(Ni_xCo_yMn_z)O₂] cathode active material. Nickel is known as a metal that is resistant to oxidation and has a high melting point. Nickel is one of the main components of NCM cathode material and was expected to be free from problems with contamination from saggar during cathode material synthesis. We sought to confirm the possibility of nickel as a saggar for synthesizing NCM cathode active materials. When a Ni metal crucible and Ni_0.8Co_0.1Mn_0.1(OH)₂ (NCM 811) precursor material were reacted at 900℃ for a long time, the change in the reaction layer on the surface of the crucible over time was analyzed. The nickel crucible reaction layer formed during heat treatment at 900℃ was nickel oxide, and is thought to have been created by simultaneous oxygen diffusion from the cathode precursor oxide and reaction with oxygen in the atmosphere. The change in thickness of the oxide layer appears to slow down after 480 hours, which suggests that the rate of oxygen diffusion from the precursor is reduced. It remained combined without falling out of the crucible until 480 hours. However, it was confirmed that the oxide layer falls off after 720 hours, so it is thought that it can be used as saggar for NCM synthesis only for a certain period of time.

• Journal of Life Science
• /
• v.23 no.2
• /
• pp.197-206
• /
• 2013

The present study investigated whether leukemia-maintaining cells reside in a differentiation-resistant fraction using a megakaryocytic differentiation model of K562 cells. Treatment with phorbol-12-myristate-13-acetate (PMA) significantly inhibited the colony-forming efficiency of the K562 cells. At a PMA concentration of 1 nM or higher, colony was not formed, but approximately 40% of K562 cells still survived in soft agar. Approximately 70% of colony-forming cells that were isolated following the removal of PMA after exposure to the agent were differentiated after treatment with 10 nM PMA for 3 days. The differentiation rate of the colony-forming cells was gradually increased and reached about 90% 6 weeks after colony isolation, which was comparable to the level of a PMA-treated K562 control. Meanwhile, imatinib-resistant variants from the K562 cells, including K562/R1, K562/R2, and K562/R3 cells, did not show any colony-forming activity, and most imatinib-resistant variants were CD44 positive. After 4 months of culture in drug-free medium, the surface level of CD44 was decreased in comparison with primary imatinib-resistant variants, and a few colonies were formed from K562/R3 cells. In these cells, Bcr-Abl, which was lost in the imatinib-resistant variants, was re-expressed, and the original phenotypes of the K562 cells were partially recovered. These results suggest that leukemia-maintaining cells might reside in a differentiation-resistant population. Differentiation therapy to eliminate leukemia-maintaining cells could be a successful treatment for leukemia if the leukemia-maintaining cells were exposed to a differentiation inducer for a long time and at a high dose.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.71-79
• /
• 2017

Purpose: Ni-Cr alloy does not contain Beryllium, causing the metal compound to form oxides in the furnace but by using Titanium as a chemical catalyst the forming of the oxides can be controlled, and by controlling the impurities formed on the metal surface, the possibility of the Ni-Cr alloy bond strength being increased can be analysed. Materials and Methods: Titanium was used as a chemical catalyst in the porcelain for the oxidation of beryllium-free metal (Ni-Cr) alloy. The T1 group, which does not use Titanium power as a chemical catalyst is a reference model for comparison. The T2 group and T3 group used 10 g and 20 g of Titanium power, respectively. They are fabricated to observe the shear bond strength and surface properties. There was no significance when One-way ANOVA analysis/Tukey Honestly Significant Difference Test was conducted for statistical analysis among groups (P > 0.05). Results: Results of measuring the three-point flexural bond strength of the Ni-Cr alloy and thickness of the oxide film. Experiment T3 using 20 g Titanium chemical catalyst: $39.22{\pm}3.41MPa$ and $6.66{\mu}m$, having the highest bond strength and thinness of oxide film. Experiment T2 using 10 g Titanium chemical catalyst: $34.65{\pm}1.39MPa$ and $13.22{\mu}m$. Experiment T1 using no Titanium chemical catalyst: $32.37{\pm}1.91MPa$ and $22.22{\mu}m$. Conclusion: The T2 and T3 experiments using Titanium chemical catalyst showed higher bond strength for the Ni-Cr alloy and lower thickness of oxide film than experiment T1, and the titanium catalyst being able to increase bond strength was observed.

• Journal of Korean Society of Forest Science
• /
• v.13 no.1
• /
• pp.25-39
• /
• 1971

Recently successful induction of haploid plant by means of anther culture method has become a big topic among geneticists and plant breeders. The haploid plant can be used as a precious material for such basic researches as mutation or genetics. Once the haploid is obtained, production of homozygous plant is not a difficult problem. The method of producing homozygous plant can, also, be applied to the practical breeding works. When applied to the hybridization of self-fertilizing breeding period would be greatly shortened and in cross-fertilizing vegetables production of uniform hybrid seed would be very easily obtained. Last few years many scientists attempted anther cultures using various plant species, but it was successful only in several species. Unlike the other tissue cultures which use somatic organs or tissues as explants, anther culture seems to be very difficult because the plants or calli have to be induced from the haploid microspores or pollen grains. In the present experiment anther culture of fruit trees and ornamental shrubs of four genera and seven species was attemped. Anthers of Various stages ranging from tetrad and late microspore were cultured on the modified Murashige and Skoog's medium supplemented with various concentrations of auxins and kinetin as growth regulators. Handling of materials, sterilization, and other operations of culture were done by routine methods. The results were summarized as follows: 1. Calli were induced in the anthers of Forsythia Koreana Nak., Rhododendron mucronuratum Turcz., R. yedoense Max. var. Poukhanense Nak., and Prunus armeniaca L. var. ansu Max. No signs of callus were observed in Prunus persica Sieb. et Zucc. var. vurgaris Max., Pyrus ussuriensis var. macrostipes (Nak.), and Prunus salcina Lindley. 2. Calli were easily formed in any of the media with differing concentrations of auxins and kinetin. 3. In F. Koreana calli developed from anther surface and connective. Callus emerging out of anther locule was not observed. 4. Somatic calli arose from filament, connective, and inside of anther wall in R. mucronulatum. Many of the microspores accumulated starch grains. 5. The anther lobes located opposite the filament of R. yedoense turned easily to calli. This phenomenon was not observed in R. mucronulatum. Microspore embedded for a period in the medium became starch pollen. No callus was observed arising from microspore. 6. In P. armeniaca calli were not induced from somatic anther tissues. Instead, callus emerged out of anther locule rupturing the anther slit. Starch was not formed in the microspore. 7. In P. persica, Pyrus ussuriensis, and P. salcina, calli were not observed in the anthers examined more than 60 days after culture. Microspores of these species, however, were free of starch grains even after long period of subculture. 8. It was learned that somatic calli of the species examined arose usually from endothelium of anther wall, septum of two neighboring anther locules, parenchyma tissues of connectives, or anther lobes. 9. In the anther locule of P. armeniaca cultured long in medium, swollen microspores, polynucleate microspores, multicellular pollen grains, or callus mass were frequently observed, this indicating that the callus of this species was microspore-origin. 10. It was clarified that in P. armeniaca production of haploid plant by anther culture might be possible.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.131-146
• /
• 2014

High-resolution seismic profiles coupled with sediment sampling were analyzed to investigate the acoustic characters and distribution patterns of the late Holocene sediments in Gamak Bay of the South Sea, Korea. The mean grain size of surficial sediment lies around $6.3{\sim}9.7{\Phi}$. Sediments in the bay consist of silt and clay with progressive decrease toward the inner bay. The seismic sedimentary sequence overlying the acoustic basement can be divided into two sedimentary units (GB I and II) by a prominent mid-reflector (Maximum Flooding Surface; MFS). The acoustic basement occurs at the depth between 20 m and 40 m below the sea-level and deepens gradually southward. The GB I, mostly occupying the channel-fill, is characterized by reflection-free seismic facies. It can be formed as late Transgressive System Tract (TST), interpreted tidal environment deposits. MFS appears at the depth of about 15~28 m below the sea-level and is well defined by even and continuous reflectors on the seismic profile. The GB II overlying MFS is composed of acoustically transparent to semitransparent and parallel internal reflectors. GB II is interpreted as the Highstand System Tract (HST) probably deposited during the last 6,000 yrs when the sea level was close to the present level. Especially, it is though that the GB II was subdivided into two layers (GB II-a and II-b) by a HST-reflector and this was classified by wind, sea water flux, and tidal current.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.2
• /
• pp.68-77
• /
• 2002

We investigated the outbreak, maintenance, and decline of the red tide dominated by C. polykrikoides in the coastal waters off Southern Korea from August to October, 2000, by combining field data and NOAA satellite images. In general, the C. polykrikoides blooms, which have occured annually in Korean coastal waters from 1995 to 1999, initiate between late August and early September around Narodo Island and expand to the whole area of the southern coast. However, initiation and short-term change of the bloom of 2000 were quite different from the pattern observed previously. In mid-August, thermal fronts in sea surface temperature(SST) were formed: 1) between the Tsushima Warm Current Water (TWCW) and the Southern Korean Coastal Waters (SKCW), 2) between the jindo cold water mass and the southwestern coastal waters, and 3) between the upwelled cold waters in the southeast coast and the offshore warm waters. Free-living cells of C. polykrikoides were concentrated in these frontal regions. In late August, the thermal front TWCW-SKCW approached the mouth of Yeosuhae Bay where Seomjin River water and anthropogenic pollutants from the Industrial Complex of Gwangyang Bay are discharged. In the blooms of 2000 initiated in Yeosuhae Bay in late August, the dominant species, C. polykrikoides, co-occured with Alexandrum tamarense, Gymnodinium mikimotoi, Skeletonema coastatum, and Chaetoceros spp. Two typhoons, 'Prapiroon' and 'Saomai' during and the C. polykrikoides bloom probably affected the abundance of this species. After the former typhoon passed the Korean Peninsula, cell growth of C. polykrikoides was maximal, but after the latter typhoon, the C. polykrikoides bloom disappeared (20 September). On 5 October, the blooms dominated by C. polykrikoides broke out within the coastal waters of Jinhae Bay and Hansan-Keoje Bay. NOAA satellite images showed that the isothermal line of 22$^{\circ}C$ extended into Jinhae Bay. In this bloom, C. polykrikoides also occurred simultaneously with Akashiwo sanguinea(=Gym-nodinium sangunium), a common red tide-forming dinoflagellate species in fall and winter in these coastal bays.