• Carbon letters
• /
• v.28
• /
• pp.16-23
• /
• 2018

A novel, unique, and effective method for carbon nanotube (CNT) dispersion by the free arc stimulation is proposed. CNTs are introduced as an aerogel into the air space via the dispersion method and can be utilized as a solution by adding it to solvents. The volume of the original generated CNT aerogel with a high-volume expansion ratio displays a performance two orders of magnitudes better than that of raw CNTs, which is considered a powerful characterization of the dispersion effect. The CNT aerogel, which was observed by scanning electron microscopy also showed a satisfactory dispersion morphology. Its structure and properties were tested before and after dispersion by Raman spectroscopy and great consistency was observed, which proved that the CNTs were undamaged. This approach may greatly promote the large-scale application of CNTs.

• Structural Monitoring and Maintenance
• /
• v.3 no.1
• /
• pp.33-49
• /
• 2016

Structural Health Monitoring (SHM) has been attracting numerous research efforts around the world because it targets at monitoring structural conditions and performance to prevent catastrophic failure, and to provide quantitative data for engineers and infrastructure owners to design a reliable and economical asset management strategy. In the past decade, with supports from Australian Research Council (ARC), Cooperative Research Center for Infrastructure and Engineering Asset Management (CIEAM), CSIRO and industry partners, intensive research works have been conducted in the School of Civil, Environmental and Mining Engineering, University of Western Australia and Centre for Infrastructural Monitoring and Protection, Curtin University on various techniques of SHM. The researches include the development of hardware, software and various algorithms, such as various signal processing techniques for operational modal analysis, modal analysis toolbox, non-model based methods for assessing the shear connection in composite bridges and identifying the free spanning and supports conditions of pipelines, vibration based structural damage identification and model updating approaches considering uncertainty and noise effects, structural identification under moving loads, guided wave propagation technique for detecting debonding damage, and relative displacement sensors for SHM in composite and steel truss bridges. This paper aims at summarizing and reviewing the recent research advances on SHM of civil infrastructure in Western Australia.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.51-57
• /
• 1963

It is well known that the graphite flakes become spherulite, when a suitable amount of nodulizing element, such as cerium or magnesium, is added to the cast iron. The change of graphite from flake to nodular shape improves not only the tensile strength but the ductility as well. However, the mechanism of spheroidization of graphite in cast iron has not yet been clearly understood, and various theories proposed by a number of investigators were such that it may be due to the special nucleation effect, prevention of flake formation by the adsorption of magnesium vapour on the graphite surface or file surface free energy difference between plain graphite and magnesium-adsorbed graphite. Regardless of the speculations of spheroidizing mechanism of the graphite in the cast iron, the final phenomenon comes to the conclusion that it may be due to the lack of wettability between graphite and iron matrix. In order to collaborate this fact through an experimental method, the authors have constructed a vacuum arc furnace for the wettability measurement as its first step. Our study and experiments were then directed to the comparison of the wettability between iron and graphite on the two cases (namely, the one where magnesium was preliminarily coated on the graphite surface and the other not coated), by means of contact angle measurements. The result was such that a significant difference of the contact angles has been shown between the above two cases. indicating the spheroidization of graphite which might have resulted from the lack of wettability between magnesium-adsorbed graphite and iron matrix.

• Korean Journal of Head & Neck Oncology
• /
• v.7 no.2
• /
• pp.92-98
• /
• 1991

Numerous mycoutaneous island flaps or free flaps have been used to reconstruct a defect which resulted from the wide resection of tumor mass in head and neck region. Since the curative resection of tumor usually include muscles and bones as well as skin and mucosa, the anatomical and functional restoration of the defect depend on which and what amount of tissues were provided to cover the defect; good aesthetic appearance subsequently follows the result. Furthermore, a simultaneous neck nodes dissection usually results in exposure of major neck vessels., which should be protected with sufficient padding. The ideal method to reconstruct a defect in the head and neck region requires a sufficient coverage by muscle layer with good vascularity, a wide arc of rotation, and minimization of donor site defect. The pectoralis major myocutaneous flap which was first decribed by Ariyan and lateral trapezius myocutaneous flap by Demergasso meet these criteria. We describe the use of these myocutaneous flaps in reconstruction of mandible and oral cavity.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.179-180
• /
• 2012

Aluminum alloys are widely known as non-ferrous metal with light weight and high strength. Consequently, these materials take center stage in the aircraft and automobile industry. The Al7075 aluminum alloy is based on the Al-Zn-Mg-Cu and one of the strongest wrought aluminum alloys. Aluminum nitride has ten times higher thermal conductivity($319W/m{\cdot}K$) than Al2O3 and also has outstanding electric insulation($1{\times}1014{\Omega}{\cdot}cm$). Furthermore, it has high mechanical property (430 MPa) even though its co-efficient of thermal expansion is less than alumina For these reasons, it has great possibilities to be used for not only the field which needs high strength lightweight but also electronic material field because of its suitability to be applied to the insulator film of PCB or wafer of ceramic with high heat conduction. This paper investigates the mechanical properties and corrosion behavior of aluminum alloy Al7075 deposited with aluminum nitride thin films To improve the surface properties of Al7075 with respect to hardness, and resistance to corrosion, aluminum nitride thin films have been deposited by pulsed DC reactive magnetron sputtering. The pulsed DC power provides arc-free deposition of insulating films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.98-98
• /
• 2013

완전화 박막이란 사용자가 원하는 용도에 맞게 최적의 성능을 구현하도록 제조된 박막을 의미하며 금속이나 화합물 박막을 제조하되 각종 구조 제어 Tool이나 증착 공정을 변화시켜 나노화와 다층화 또는 치밀화를 통해 구현될 수 있다. 최근 고성능의 증착 및 제어 Tool이 개발되고 빗각증착(Oblique Angle Deposition)이나 스침각 증착(Glancing Angle Deposition) 방법 등의 기술이 개발되면서 사용자 목적에 최적인 박막 소재를 제공하여 User-friendly한 응용을 위한 연구개발이 활발히 진행되고 있다. 완전화 박막 제조에 대한 시도는 1990년대에 일본에서 시작되었다. 일본에서는 산학연이 공동으로 참여하는 NEDO 프로그램을 통해 경질코팅을 이용한 Protective Layer를 제조하여 차단 방식에 의한 내식성 구현 연구를 수행하였다. 유럽에서는 제 7차 European Framework Program (7th FT)을 통해 2007년부터 CORRAL (Corrosion Protection with Perfect Atomic Layer) 프로젝트를 만들어 완전화 박막 연구를 진행하고 있다. 상기 프로젝트는 얇은 자연 산화막이 Bulk의 부식을 방지해주는 것에 착안하여 HIPIMS나 Filtered Arc 또는 ALD 공정을 이용하여 자연 산화막과 유사한 Defect-free 산화막을 제조하여 Barrier형 내식성 박막을 구현하는 것을 목표로 하고 있다. 본 연구에서는 완전화 박막 구현을 위한 연구동향을 파악하고 완전화 박막 제조를 위한 기술적 과제와 몇 가지의 시도에 대한 기초 연구 자료를 소개한다.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1574-1576
• /
• 1994

$SF_6$ gas has become an important insulation medium in modern electric power apparatus, because of its high insulation withstand levels and good arc quenching capability. For the application of $SF_6$ gas in GIS the estimation of insulation properties is a fundamental point. Moreover the reduction of withstand levels in case of inhomogeneous fields caused by particles or fixed protrusions is of special interest. It is known that the presence of free conducting particles in GIS can significantly lower the insulating level of $SF_6$ gas at elevated pressure and also it has been recently shown that dielectric strength is greatly reduced by fast transients such as disconnector surges where metallic particles are involved. In this paper, we have disigned the particle test chamber rated 362kV for the purpose of investigating the discharge characteristics in SF6 gas where inhomogenius fields are caused by metallic particles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.468-469
• /
• 2007

$SF_6$ gas used widely as insulating component in electric power industry has excellent in insulation and arc extinguishing performance in gas-insulated switchgear. However, the concern about eco-friendly alternative gas is currently rising, because $SF_6$ gas is one of the main greenhouse gases. As one of the study for $SF_6$ free technology, composite-insulation technology is focused in this paper. To analyze the influence by epoxy thickness change, the composite-insulation composed of dry-air and epoxy was used in this paper. To analyze AC breakdown by the epoxy thickness, needle-plane electrode was used and needle was molded by epoxy. Under the gas pressure ranged from 0.1 to 0.6MPa, the breakdown voltage of dry-air were measured in AC electric field. The data of composite-insulation were acquired by changing the thickness of epoxy used in each composite-insulation under the same condition.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.30-37
• /
• 1989

Effect of heat treatment on mechanical properties of an overlay weldment was investigated. Over welding was carried out on the structural C-Mn mild steel substrate to take required test specimens. Shielded metal arc welding process with 13Cr-0.2Ni stick electrode was applied. The heat treatment temperatures and holding times were $450{\circ}C., 550{\circ}C., 650{\circ}C., 750{\circ}C., 850{\circ}C.$ and 0.5hr, 2hr, 10hr, respectively. Mechanical tests and microscopic inspection were also carried out to investigate welds soundness. Test results indicated that carbon migration was dominant near bonded zone. At temperature of around 650.deg. C, carburized layer and decarburized layer were formed remarkably along overlay welds region and C-Mn mild steel region, respectively. The wideth of these layers became wider with increasing heat treatment temperature and/or holding time at the elevated temperature, and this relationship agreed with Larson-Miller parameter. Side bending test results demonstrated that the crack free region of overlay welds could be deduced from the relationship between temperature and holding time.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.5
• /
• pp.187-196
• /
• 2010

We present a link that allows Excel to call the functions in the lp_solve system. lp_solve is free software licensed under the GPL that solves linear and mixed integer linear programs of moderate size. Our link manages the interface between Excel and lp_solve. Excel has a built-in add-in named Solver that is capable of solving mixed integer programs, but only with fewer than 200 variables. This link allows Excel users to handle substantially larger problems at no extra cost. Futhermore, we introduce that a network drawing method in Excel using arc adjacency lists of a network.