• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.483-484
• /
• 2007

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.276-282
• /
• 2005

These studies developed system as well as its algorithm which can measure traffic flow and vehicle speed on the highway as well as road by using industrial television(ITV) system. This algorithm used the real time processing of dynamic images. The processing algorithm of dynamic images is developed and proved its validity by frame grabber. Frame grabber can process the information of a small number of sample points only instead of the whole pixel of the images. In the techniques of this algorithm, we made approximate contour of vehicle by allocating sampling points in cross-direction of image, and recognized top of contour of vehicle. Applying these technique, we measured the number of passing vehicles of one lane as well as multilane. Speed of each vehicle is measured by computing the time difference between a pair of sample points on two sample Points lines.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.9
• /
• pp.1177-1188
• /
• 2002

To classify real time Lead pin images in this paper, The image acquisition system was composed to C.C.D, image frame grabber(DT3153), P.C(PentiumIII). I proposed image processing algorithms. This algorithms were composed to real time monitoring, Lead Pin image acquisition, image noise deletion, object area detection, point detection and pattern classification algorithm. The raw images were acquired from Lead pin images using the system. The result images were obtained from raw images by image processing algorithms. In implemental result, The right recognition was 97 of 100 acceptable products, 95 of 100 defective products. The recognition rate was 96% for total 200 Lead Pins.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.515-519
• /
• 1993

Image processin software is developed to get spot intensity form the frame of a LEEd pattern obtained by using a CCD Camera and a frame grabber. Imporved algorithm for more reasonable background substraction is implemented in this software . I/V Charateristicsof some spots form Cu(001) suface are collected . These results are compared with those of Davis and Noonan and found to be consistent with the latter results. This software is also applied to meausre RHEEd spot intensity oscillatin, and gives clear oscillations very easily.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.697-698
• /
• 2007

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.314-319
• /
• 2002

The Automation and Control Group at the University of Brasilia is developing an automatic welding station based on an industrial robot and a controllable welding machine. Several techniques were applied in order to improve the quality of the welding joints. This paper deals with the implementation of a laser-based computer vision system to guide the robotic manipulator during the welding process. Currently the robot is taught to follow a prescribed trajectory which is recorded a repeated over and over relying on the repeatability specification from the robot manufacturer. The objective of the computer vision system is monitoring the actual trajectory followed by the welding torch and to evaluate deviations from the desired trajectory. The position errors then being transfer to a control algorithm in order to actuate the robotic manipulator and cancel the trajectory errors. The computer vision systems consists of a CCD camera attached to the welding torch, a laser emitting diode circuit, a PC computer-based frame grabber card, and a computer vision algorithm. The laser circuit establishes a sharp luminous reference line which images are captured through the video camera. The raw image data is then digitized and stored in the frame grabber card for further processing using specifically written algorithms. These image-processing algorithms give the actual welding path, the relative position between the pieces and the required corrections. Two case studies are considered: the first is the joining of two flat metal pieces; and the second is concerned with joining a cylindrical-shape piece to a flat surface. An implementation of this computer vision system using parallel computer processing is being studied.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.172-180
• /
• 2003

In this paper, we propose fast and precise extracting & tracking algorithm based on general camera and frame grabber for facial motion capture animation. Proposed algorithm consists of two steps. extracting and tracking. The former is to separate multiple markers from input image using region merging based on neural networks. The latter Is to track extracted multiple markers at each frame using tracking algorithm based on neural networks. In the experiment, we could remove noise and reduce processing time in the step of extraction. In addition, we could have good tracking results in the low frame rates.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.769-772
• /
• 1998

This paper present an efficient techniques for visual inspection of taped electronic parts, suitable for real time implementation. The main environments of developed system are IBM-compatible personal computer, frame grabber, digital input-output board. It is connected to the programmable logic controller unit of the taping machine in real time. Using a queuing structure, operator or extractor machine can remove easily the defect one from production line. Also, we design a new illumination system for sacquring shape and subface features of object. Therefore, it redue pre-processing step and processing time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.485-489
• /
• 1995

From the relationship between the two different views of an object with grid, the three dimensional coordinates of intersection points are determined. The images are captured and digitized with a CCD camera and a frame grabber. To find intersection points, local thresholding and line thinning operations are performed. By establishing the correspondence between the points in the two views, the three dimensional corrdinates of intersection points are calculated.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.03a
• /
• pp.89-92
• /
• 1998

압연철판의 생산라인에 있는 카메라에 입력되는 영상정보를 Image Frame Grabber를 이용하지 않고 Video Overlay Board를 사용하여 라인에 입력되는 압연철판을 분석하여 외곽선을 가로지른 선분의 길이가 기준에 준할 때 정확한 절단정보를 발생시킴으로 기존에 사용해온 작업자의 대략적인 지식을 이용한 절단에서 발생되는 압연 철판의 손실을 최소화시키며 불량률을 줄인다. 그리고 발생되는 정보를 DB화시킴으로 생산품의 정확한 재고량을 관리하는 시스템을 개발한다.