• 한국방재안전학회논문집
• /
• 제16권1호
• /
• pp.91-103
• /
• 2023

본 연구의 목적은 테르밋 반응으로 결정화된 액체혼합물을 순간적으로 기화시켜, 이에 따라 발생되는 증기압을 이용하여 암석 및 콘크리트를 파쇄시키는 Nonex Rock Cracker(NRC) 암석 파쇄제의 동적 파괴 특성을 분석하고 파괴패턴을 예측할 수 있는 해석기법을 개발하기 위함이다. NRC 암석 파쇄제의 순간적의 증기압 발생 특성을 분석하기 위하여 인공취성재료로 알려진 Polymethyl methacrylate(PMMA) 블록을 대상으로 NRC를 장전하여 파쇄시험을 수행하였다. NRC의 증기압 발생순간을 촬영하기 위하여 초고속 카메라를 활용하였으며, 장약실과 연결된 관측공에 동적압력게이지를 부착하여 장약공 압력-시간이력을 계측하였다. 증기압 암석 파쇄제에 의한 PMMA 블록의 파괴패턴을 모사하기 위하여 2차원 동적 파괴 과정 해석 기법인 2D Dynamic Fracture Process Analysis(2DDFPA)가 활용되었으며, 계측된 장약공 압력-시간이력을 고려한 입사압력함수를 결정하였다. 제안된 해석조건을 활용하여 화강암재료와 고성능 폭약에 의하여 발생될 수 있는 파괴패턴에 대하여 고찰하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.115.2-115.2
• /
• 2005

• Steel and Composite Structures
• /
• 제20권4호
• /
• pp.913-930
• /
• 2016

It is common practice to use Reduced Web Beam Sections (RWBS) in steel moment resisting frames. Perforation of beam web in these members may cause stress and strain concentration around the opening area and facilitate ductile fracture under cyclic loading. This paper presents a numerical study on the cyclic fracture of these structural components. The considered connections are configured as T-shaped assemblies with beams of elongated circular perforations. The failure of specimens under Ultra Low Cycle Fatigue (ULCF) condition is simulated using Cyclic Void Growth Model (CVGM) which is a micromechanics based fracture model. In each model, CVGM fracture index is calculated based on the stress and strain time histories and then models with different opening configurations are compared based on the calculated fracture index. In addition to the global models, sub-models with refined mesh are used to evaluate fracture index around the beam to column weldment. Modeling techniques are validated using data from previous experiments. Results show that as the perforation size increases, opening corners experience greater fracture index. This is while as the opening size increases the maximum observed fracture index at the connection welds decreases. However, the initiation of fracture at connection welds occurs at lower drift angles compared to opening corners. Finally, a probabilistic framework is applied to CVGM in order to account for the uncertainties existing in the prediction of ductile fracture and results are discussed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.284-287
• /
• 2005

The flow of groundwater in fractured medium is related to the geometric characteristics of the fracture system. And a fracture aperture and a fracture density are considered as important factor concerning the permeability. Data acquisition of the properties of fracture such as aperture and density is so difficult and has uncertainty. We also cannot know the fracture characteristics through the in-situ tests. We usually obtain the fracture information from a ultrasonic scan logging or borehole television indirectly. Using the deduced results, we can make the fracture system and simulate the groundwater flow and solute transport in the crystalline rock. This study aimed to analyze the correlation between the properties of fracture and hydraulic conductivities obtained at the same interval. The properties of fracture are examined by acoustic televiwer and hydraulic conductivities are obtained by constant Pressure injection test. The distributioin of fracture width and fracture frequency shows the log-normal probability plot. And, Results of correlation analysis explain that opened type fractures have proper relation with hydraulic conductivity. But, as though there are semi-opened type fractures or closed type fractures, those have the permeable structure.

• 소성∙가공
• /
• 제32권2호
• /
• pp.92-99
• /
• 2023

In this study, shear fracture specimens are designed using finite element analyses for the characterization of ductile fracture criteria of metal sheets. Many recently suggested ductile fracture criteria require experimental fracture data at the shear stress states in the model parameter identification. However, it is challenging to maintain shear stress states in tension-based specimens from the initial yield to the final fracture, and the loading path can be different for the different materials even with the same shear specimen geometries. To account for this issue, two different shear fracture specimens for low ductility/high ductility metal sheets are designed using the sensitivity tests conducted by finite element simulations. Priorly mechanical properties including the Hosford-Coulomb fracture criterion of the aluminum alloy 7075-T6 and DP590 steel sheets are used in the simulations. The results show that shear stress states are well-maintained until the fracture at the fracture initiation points by optimizing the notch geometries of the shear fracture specimens.

• Journal of Chest Surgery
• /
• 제45권4호
• /
• pp.246-250
• /
• 2012

Background: Although it is rare for the fracture itself to become a life threatening injury in patients suffering from rib fracture, the lives of these patients are occasionally threatened by other associated injuries. Especially, early discovery of patients with rib fracture and intra-abdominal organ injury is extremely important to the prognosis. This study analyzed the link between rib fracture and intra-abdominal injury to achieve improved treatment. Materials and Methods: Among trauma patients that had visited the hospital emergency room from January 2007 to December 2009, a retrospective study was conducted on 453 patients suffering from rib fracture due to blunt trauma. Rib fracture was classified according to location (left, right, and bilateral), and according to level (upper rib fracture [1-2nd rib], middle rib fracture [3-8th rib], and lower rib fracture [9-12th rib]). The researched data was statistically compared and analyzed to investigate the correlation between the location, level, and number of rib fracture and intra-abdominal organ injury. Results: Motor vehicle injury was found to be the most common mechanism of injury with 208 cases (46%). Associated injuries accompanied with rib fracture were generated in 276 cases (61%). Intra-abdominal organ injury was discovered in 97 cases (21%). Liver injury was the most common intra-abdominal injury associated with rib fracture with 39 cases (40%), followed by spleen injury, with 23 cases (23%). Intra-abdominal injury according to level of rib fracture was presented as upper rib fracture in 11 cases (11%), middle rib fracture in 31 cases (32%), and lower rib fracture in 55 cases (57%), thus verifying that intra-abdominal injuries were commonly accompanied in lower rib fractures (p=0.03). In particular, significant increase of intra-abdominal injury was presented in fractures below the 8th rib (p=0.03). The number of intra-abdominal injuries requiring emergency operations was significantly higher in patients with more than 6 rib fractures (p=0.04). Conclusion: Intra-abdominal organ injury is more common in patients with lower rib fracture, especially fractures below the 8th rib. Intra-abdominal organ injuries generated in multiple rib fracture patients with more than 6 fractures significantly higher severity. These cases must be thoroughly inspected and carefully observed as there is possibility of emergency operation.

• 한국가스학회지
• /
• 제19권5호
• /
• pp.13-19
• /
• 2015

본 연구에서는 보다 현실적인 파쇄균열 전파를 묘사하기 위해 수압파쇄균열 전파 모델을 개발하였다. 이 모델에서는 두 가지 균열 전파 기준을 적용하였다. 첫 번째는 균열의 발생각을 결정하기 위한 최대 접선응력 기준과 두 번째는 파쇄균열의 자연균열 통과 여부 기준이다. 본 모델의 검증 결과, 수압파쇄균열이 자연균열을 통과하는 양상이 실험값과 동일함을 확인하였다. 균열의 전파에 직접적인 영향을 미치는 요소인 최대수평응력 방향, 균열면의 마찰계수, 자연균열의 방향성에 대한 민감도 분석 결과, 이론적 기준에 적합하게 균열의 전파 방향과 통과 여부가 결정되는 것으로 나타났다. 기존의 수직 판형 균열 전파 모델과 본 모델을 비교하여 균열의 연결성과 유정 자극부피 측면에서 차이가 있음을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제25권1호
• /
• pp.1-8
• /
• 2012

본 연구는 다양한 건설 구조물 중 휨 응력을 받는 부재인 슬래브, 거더 등에 FRP(Fiber Reinforced Polymer) 박스부재를 적용하기 위한 기초 실험적 연구이다. 조립이 가능한 FRP 부재를 제작하여 FRP 박스부재의 대형단면으로서의 연결 후 압축파괴 거동 특성을 분석하기 위하여 다양한 조건으로 실험을 수행하였다. FRP 박스부재의 상부에 충진재와 하중재하 방법 및 연결형태에 따른 압축파괴 거동 실험을 실시하였으며, 이를 이용하여 유한요소해석을 수행하였다. 해석결과를 실험결과와 비교한 결과 강성이 약간 낮게 조사되었으나 시험체의 파괴지점에 응력이 집중되는 것을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.611-623
• /
• 1998

The delamination fracture of multidirectional carbon-fiber/epoxy laminates under the Mode I condition has been studied using the modified beam analysis for a fracture mechanics approach. It was found that the variation of fracture energy $G_IC$ with increasing length of the propagating crack exhibited a minimum for the pure interlaminar fracture and a maximum for the intraply fracture,i.e. a rising "R-curve", which was strongly affected by the degree of fiber bridging and crack-tip splitting arising in the global delamination. The maximum $G_IC$ value was significantly dependent on such types of delamination as no crack jumping, crack jumping into the adjacent ply and edge-delamination. It was shown also that the value of "effective flexural modulus" estimated from the modified beam analysis increased much with the development of fiber bridging behind the crack tip.ehind the crack tip.

• Journal of Korean Biological Nursing Science
• /
• 제18권4호
• /
• pp.193-202
• /
• 2016

Purpose: The study was to analyze clinical outcomes and risk factors of for complications associated with the hip fracture surgery in the elderly before and after interdisciplinary treatment. Methods: A retrospective method was used to investigate the general and therapeutic characteristics, frequency of complications and clinical outcomes. The subjects of the study were 553 patients who underwent hip fracture surgery from January, 2009 to December, 2014. Results: The interdisciplinary group was older and less likely to walk independently even before the fracture than a usual care group. The incidence of complications was higher in the interdisciplinary group than the usual care group. The prevalence of complications in both groups was 66.5%. Multivariate logistic regression analysis showsed that the risk factors for complications of hip fracture surgery were as follows: advanced age, stroke, Parkinson disease, time interval from emergency room to operation, pre & post ambulatory status, American Society of Anesthesiologists (ASA) classification quality of postop intensive care unit (ICU) care and foley indwelling. Conclusion: This study has implications in that it recognized the necessity for interdisciplinary treatment and provided the basic base data for nursing intervention of the elderly patients who underwent hip fracture surgery.