• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.216-223
• /
• 2015

The present work explores the potential of wet air oxidation (WAO) for pretreatment of mixed lignocellulosic biomass to enhance enzymatic convertibility. Rice husk and wheat straw mixture (1:1 mass ratio) was used as a model mixed lignocellulosic biomass. Post-WAO treatment, cellulose recovery in the solid fraction was in the range of 86% to 99%, accompanied by a significant increase in enzymatic hydrolysis of cellulose present in the solid fraction. The highest enzymatic conversion efficiency, 63% (by weight), was achieved for the mixed biomass pretreated at $195^{\circ}C$, 5 bar, 10 minutes compared to only 19% in the untreated biomass. The pretreatment under the aforesaid condition also facilitated 52% lignin removal and 67% hemicellulose solubilization. A statistical design of experiments on WAO process conditions was conducted to understand the effect of process parameters on pretreatment, and the predicted responses were found to be in close agreement with the experimental data. Enzymatic hydrolysis experiments with WAO liquid fraction as diluent showed favorable results with sugar enhancement up to $10.4gL^{-1}$.

• KSBB Journal
• /
• v.29 no.1
• /
• pp.29-35
• /
• 2014

In this study, antioxidant and antimicrobial activities of ethanolic crude extract and its five different solvent subfractions (namely, ethyl acetate fraction, n-butanol fraction, chloroform fraction, n-hexane fraction and the aqueous fraction) from a mixture of four different medicinal herbs (Galla rhois, Achyranthes japonica Nakai, Terminalia chebula Retz and Glycyrrhiza uralensis) were investigated. Among all the tested mixture combination of four medicinal herbs, 5:3:1:1 ratio of Galla:Achyranthes : Terminalia : Glycyrrhiza had the best antimicrobial effects against four strains of microorganisms (Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa and Escherichia coli) and exhibited the highest DPPH radical-scavenging activity. Further sub-fractions with solvents were screened for antioxidant and antimicrobial activities. Antioxidant activity in order was ethyl acetate fraction > n-butanol fraction > chloroform fraction > nhexane fraction > aqueous fraction. The n-butanol extracted fraction showed the highest level of antimicrobial activity in com- parison to other fractions. In addition, all those fractions did not show any cytotoxicity against human skin cell CCD-986sk. These results suggest that 5:3:1:1 combination extracts of medicinal herbs (Galla : Achyranthes : Terminalia : Glycyrrhiza) may be potentially used as a safe natural antimicrobial preservative.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.102-108
• /
• 1997

It has been studied that SO$_2$ removal efficiency of anthracite-bituminous coal blend combustion in a fludized bed coal combustor. The objectives of this study were to investigate SO$_2$ removal characteristics of coal blend combustion with Ca/S, anthracite fraction, bed temperature, and limestone size. The experimental results were presented as follows First, the effect of the desulfurization by the dia size of limestone was great and SO$_2$ removal efficiency was highest in limestone dia 631 $\mu$m. Second, as air velocity increased, the desulfurization rate decreased a little. But the difference of the desulfurization rate according to air velocity was not too large. As the height of fluidized bed combustor increased regardless of air velocity, SO$_2$ concentration tends to increase largely. Third, as Ca/S mole ratio incresed, SO$_2$ desulfurization rate incresed rapidly up to Ca/S mole ratio 3 while the desulfurization rates did not increse too largely in the range of more than the level. Forth, the bed temperature had a great effect on the desulfurization rate and the desulfurization rate tended to increase slightly as anthracite fraction increased.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.517-523
• /
• 1997

We have been studied that combustion efficiency and the production of air pollution of anthracite-bituminous coal blend in a fluidized bed coal combustor. Also, the reaching time of steady state condition have been studied. This experimental results are presented as follows. As the height of fluidized bed combustor becomes higher, the concentrations of $SO_2$ and NOx mainly increased. Also, as anthracite fraction increased, the emission of $SO_2$ concentration was increased but, the variation of $NO_X$ concentration was negligible according to anthracite fraction. When anthracite fraction ratio was increased, elutriation rate was increased and exit combustible content over feeding combustible content was increased. Regardless of anthracite fraction ratio the uncombustible weight percentage according to average diameter of elutriation particles were approximately high in the case of fine particles. Over bed temperature $850^{\circ}C$ and excess air 20%, the difference of combution at the velocity 0.3m/s, bed temperature $850^{\circ}C$, the excess air 20%.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.3
• /
• pp.58-64
• /
• 1997

A micromechanics model to describe the elastic behavior of fiber or whisker reinforced metal matrix composites was developed and the stress concentrations between reinforcements were investigated using the modified shear lag model with the comparison of finite element analysis (FEA). The rationale is based on the replacement of the matrix between fiber ends with the fictitious fiber to maintain the compatibility of displacement and traction. It was found that the new model gives a good agreement with FEA results in the small fiber aspect ratio regime as well as that in the large fiber aspect ratio regime. By the calculation of the present model, stress concentration factor in the matrix and the composite elastic modulus were predicted accurately. Some important factors affecting stress concentrations, such as fiber volume fraction, fiber aspect ratio, end gap size, and modulus ratio, were also discussed.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.61-66
• /
• 2015

Homogeneous charge compression ignition (HCCI) engine combines the combustion characteristics of a compression ignition engine and a spark ignition engine. HCCI engines take advantage of the high compression ratio and heat release rate and thus exhibit high efficiency found in compression ignition engines. In modern research, simulation has be come a powerful tool as it saves time and also economical when compared to experimental study. Engine simulation has been developed to predict the performance of a homogeneous charge compression ignition engine. The effects of compression ratio, cylinder pressure, rate of pressure rise, flame temperature, rate of heat release, and mass fraction burned were simulated. The simulation and analysis show several meaningful results. The objective of the present study is to develop a combustion characteristics model for a homogeneous charge compression ignition engine running with isooctane as a fuel and effect of compression ratio.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.54-60
• /
• 2001

This study is to investigate the mechanical properties and the fatigue crack propagation of fire resistance steel for frame structure as the chemical composition was changed by addition of N, B and rolled end temperature was varied. We used two kinds of specimen, the one is parallel and the other is perpendicular to the rolling directions. As rolled end temperature increased, volume fraction of ferrite and pearlite decreased, but volume fraction of baintie and grain size increased. Micro-hardness decreased as rolled end temperature increased, but tensile and yield strength increased. Volume fraction of ferrite and pearlite decreased by addition of N. But volume fraction of bainite, tensile and yield strength increased. Microstructure was changed to martensite by addition of B, and tensile and yield strength increased. Fatigue life of TL direction specimen was shorter than that of LT direction specimen. There was no significant effect to fatigue crack propagation rate by addition of N and changing rolling condition, but fatigue life was increased by addition of B.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.118-124
• /
• 2024

A neural network is utilized for preprocessing of de-noizing in electrocardiogram signals, retinal images, seismic waves, etc. However, the de-noizing process could provoke increase of computational time and distortion of the original signals. In this study, we investigated a neural network architecture to analyze measurement data without additional de-noizing process. From the dynamical behaviors of DNA in aqueous solution, our neural network model aimed to predict the mole fraction of each DNA in the solution. By adding white noise to the dynamics data of DNA artificially, we investigated the effect of the noise to neural network's predictions. As a result, our model was able to predict the DNA mole fraction with an error of O(0.01) when signal-to-noise ratio was O(1). This work can be applied as a efficient artificial intelligence methodology for analyzing DNA related to genetic disease or cancer cells which would be sensitive to background measuring noise.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.1-7
• /
• 2016

In the present study, the homogeneous model is used to simulate the natural convection heat transfer of the CuO-water nanofluid in a concentric annular enclosure. Simulations have been carried while the Rayleigh number ranges from $10^3$ to $10^6$, solid volume fraction ranges from 0.01 to 0.04 and the radius ratio varies between 0.1 and 0.7. Results are presented in the form of streamlines, isotherm patterns and averaged Nusselt numbers for different values of solid volume fraction, radius ratio of the annulus and Rayleigh numbers. The results show that by decreasing the radius ratio and/or increasing the Rayleigh number, the averaged Nusselt number increases. Also the heat transfer rate increases as increased solid volume fractions.

• Korean journal of food and cookery science
• /
• v.13 no.1
• /
• pp.7-15
• /
• 1997

The composition and polymeric structure of starch are the most important factors to determine the functional properties of rice. In an effort to relate the structural characteristics and its functional properties of starch in rice, molecular structural properties of starch from 6 rice cultivars were analysed. To relate the structure and function of starch the texture of Jeung-pyun made of rice were analyzed during retrogradation. The polymeric structure of rice starch was analyzed by debranching with isoamylase after gelatinization and fractionated with Sephadex G-75 gel filteration. The size fractionated debranched starch was categorized into four groups such as Fraction I, II, III and Intermediate Fraction depending in their max, The fractions with the max higher than 620 nm were designated as Fraction I, while those in the range of 600-620 nm and 540-600 nm as the Intermediate Fraction and Fraction II, respectively. The Fractions with the max lower than 540 were described as Fraction III. The average degree of polymerization (DP) of the Fraction I was estimated to be higher than 200, and those of other fractions, i.e. the Intermediate Fraction I, Fraction II and III were 150,45 and 25, respectively. The levels of Fraction I were varied from II to 35％ of total sugar. The Fraction I showed the linear relationship with the amylse contents, and the Intermediate Fraction, which might contain the mixture of short chain of amylose and debranched long chain of amylopectin, were measured to be in the range of 2.7∼8.4%. The levels of fraction II and III, both to be considered as the branches of amylopectin, were ranged 14.5∼23.6% and 39.7∼73.0%, respectively. The ratio of Fraction III to Fraction II describing the degree of branch or compactness of amylopectin was estimated to be around 4.0 for waxy varieties and around 2.0 for high amylose cultivars. With these results, it can be suggested that the degree of branch of the amylopectin may effect on amylose contents of starch or rice versa, To invertigate processing aptitude of different rice cultivars for the preparation of Jeung-pyun, its texture was analyzed by Instron, hardness, cohesiveness, elasticity, gumminess and chewiness of Jeung-pyun made of rice showed the significant relationship with the amylose content. Hardness was increased during retrogradation of product, but the relationship between hardness and amylose content due to not only difference in amylose content but also difference in structural characteristics of starch. In analysis of relationship between structure of rice starch and mechanical properties of Jeung-pyun during retrogradation elasticity did not show any relationship before retrogradation bur during retrogradation showed significant correlation. With these result, it can be suggested that the degree of branch of the amylopectin may effect on elasticity during retrogradation. However hardness, cohesiveness, gumminess and chewiness which were significant different before retrogradation, showed some correlation with structure of rice starch during retrigradation.